Refoss MTS200BHK Smart Thermostat for Combi Boiler Water Underfloor Heating User Manual
- June 15, 2024
- Refoss
Table of Contents
User Manual
Safety Information
- Make sure the power is OFF at the circuit breaker controlling the thermostat you are replacing.
- The thermostat must be installed and used in accordance with your local electrical code. If you are unfamiliar with these codes.or feel uncomfort- able performing the installa- tion please call a qualified electrician
- Do Not install the thermostat with wet hands or when standing on wet or damp surfaces.
- Works with boiler/water heating system.
- Not compatible with electric heating system.
- Radio-frequency / Max transmission power: 2400-2483.5MHz, 20dBm.
Package Contents
- This sensor can be used to control your heating system or for floor overheat protection. If your systemn alreadly has a sensor with the same parameters installed, you can also connect it to the thermostat to use. This external sensor is optional. you can install it or ot
Getting to know your thermostat
Indicators:
A — Current temperature/Set temperature
B — Wi-Fi
C — Working modes: Auto(Schedule).
Heat, Cool. Eco
D — Open window detected”!
E — Heating
Buttons:
F — Power
G —Mode
H — Up and Down’*
-
The device will automatically stop heating when it detects a sudden temperature drop. This is usually caused by an opened window or door.
The device will resume to its previous status after 30mins if no action is implemented. Or you can manually resume the device by pressing any button or via the guidance in Refoss app. -
Long press the mode button for 3 seconds to temporarily unlock the child lock
-
Press and hold the up and down buttons at the same time for 5 seconds, the device will factory reset and reboot.
Wiring Diagram
The wiring diagram is shown below. you can also check it on the device back Download and open the Refoss app. it will guide you through the wiring process.
|
---|---
Gas boiler heating system(Control the boiler with thermostat).
Water underfloor heating system(Control the thermal actuator with thermostat, support both 2-wire actuator and 3-wire actuator).
Installation Guide
- Download the Refoss app.https://bucket-refoss-static.refoss.net/refoss/production/qrcode/refoss.html
- Set up the device.
(1) Connect your smartphone or tablet to a 2.4 GHz Wi-Fi network.
(2) Make sure your smart device is covered by strong Wi-Fi signal.*
(3) The smart device supports iOS 13, iPados 13 and later. It is recommended that you upgrade your i0S or iPadOS to the latest version before pairing with the smart device.
(4) Launch the Refoss app and log in to your account. or if you are a new user tap Sign up to create a new account.
(5) Tap the “+ icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration
-
MTS200 only supports 24GHz Wi-Fi network.
Note:- If this s not the first time you’ve added this smart device, you’l have to reset it before going any further—press and hold the “A V” buttons at the same time for 5 seconds until the Wi-Fi LED starts blinking.
- As long as you finish configuration. youll be able to manage the device in ‘Apple Horne app.
- If the QR code does not work. please try to add the smart device in Apple Home app.
- Find more at hittps://wwwrefossnet/support.
Link Refoss to Google Assistant or Amazon Alexa
Set up the device in the Refoss app and link it to the voice assistants.
Link to Amazon Alexa
Go to User-> Amazon Alexa and allow Refoss to link with Alexa.
Link to Google Assistant
Go to User-> Google Assistant and allow
Refoss to link with Google Assistant
FAQ
At Refoss, we strive to assure your satisfaction. Attached below is a nonexhaustive list of questions that users are mostly concerned about.
1. What kind of system can MTS200 work with?
MTS200 supports boiler water heating system, does not support electric heating system.
2. How to fix a pairing failure?
Please visit https://www.refoss.net/supPort/FAQ/230.htm for solution
3. How do manage my Refuses device in Apple Home app?
Your Refuses smart device will be automatically added to Apple Home app after you finish configuration in the Refuses app.
4. Is there an internal temperature
Yes, there is an internal and an external sensor (optional)
To learn moreyou can visit https://www.refoss.net/support/fags to find solutions for more frequently asked questions.
SIMPLE DEVICE
SIMPLIFY YOUR LIFE
Email: support@refoss.net
Website: www.refoss.net
Manufacturer: Chengdu Meross Technology Co., Ltd.
Address: No. 1312, Building E6-1. Tianfu Software Park, Chengdu, China
CET PRODUCT SERVICE LTD. (for authorities only)
Beacon House Stokenchurch Business Park,
Ibstone Rd. Stokenchurch
High Wycombe HP14 3FE UK
****CET PRODUCT SERVICE SP. Z 0.0(for authorities only)
UI. Dluga 33 102
95-100 Zgierz Polen
MADE IN CHINA
INDOOR USE ONLY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>