nVent CADDY 12P Push In Conduit Clamp Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY 12P Push In Conduit Clamp
Product Information
Specifications
- Catalog Number: 12P
- Features:
- Push-in installation of conduit
- Eliminates need for offset bending conduit
- May be used for either vertical or horizontal installations
FEATURES
- Push-in installation of conduit
- Eliminates need for offset bending conduit
- May be used for either vertical or horizontal installations
Product Usage Instructions
Installation
To install the product, follow these steps:
- Ensure you have read and understood the product instruction sheets and training materials available at www.nvent.com or obtained from your nVent customer service representative.
- Identify the appropriate location for installation, considering both vertical and horizontal orientations.
- Prepare the conduit according to the provided specifications.
- Insert the conduit into the product’s push-in installation mechanism until it is securely in place.
- Verify that the conduit is properly aligned and positioned.
WARNING: nVent products must be installed and used only as indicated in nVent’s product instruction sheets and training materials. Failure to follow these instructions and warnings may result in product malfunction, property damage, serious bodily injury, and death, and may void your warranty.
Frequently Asked Questions
- Q: Can this product be used for both vertical and horizontal installations?
- A: Yes, this product is designed to be used for both vertical and horizontal installations. Please refer to the installation instructions for further details.
- Q: Where can I find the product instruction sheets?
- A: The product instruction sheets are available at www.nvent.com. You can also obtain them from your nVent customer service representative.
- Q: What should I do if I have questions or need assistance?
- A: If you have any questions or need assistance, please contact our customer service representatives using the provided contact information for your region.
FEATURES AND PRODUCT ATTRIBUTES
FEATURES
- Push-in installation of conduit
- Eliminates need for offset bending conduit
- May be used for either vertical or horizontal installations
PRODUCT ATTRIBUTES
- Material: Spring Steel
- Finish: nVent CADDY Armour
- EMT Conduit Size: 3/4″
- Outer Diameter: 0.866″ – 1.181″
- Hole Size: 9/32″
- Hole Type: Plain
- Ultimate Static Load 1: 25 lb
- Ultimate Static Load 2: 15 lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
CONTACTS
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>