Bailey LED PL G24d TC-D LED Lamp Instruction Manual
- June 16, 2024
- Bailey
Table of Contents
Bailey LED PL G24d TC-D LED Lamp
Installation Instructions
Before installation please read the specifications to make sure that this product is suitable for the operating environment.
- Not for use with Electronic Ballast (HF), disconnect ECG ballast before use and Connect directly to mains voltage (AC)!
- Disconnecting magnetic (EM/CCG) ballast is optional, not necessary.
Warning – Caution
- Risk of electric shock. Disconnect power before installation, servicing and removal.
- Make sure the supply voltage is the same as the rated lamp voltage.
- All safety instruction must be followed to avoid a risk of injury or property damage.
- Do not disconnect existing wires from lampholder.
- Not suitable for use with emergency units.
- Lamp should be used in fitting with good ventilation.
- When used in enclosed fixtures the lumen maintenance and lifetime will be affected.
- Wet applications require an IP rated fixture.
- LED retrofit installation should be done by a qualified professional.
- Not for use with dimmers.
- Not suitable for use in extreme conditions or locations involving harmful substances.
- Due to overheating, the LED light source may fail rapidly. Therefore, not suitable for use in tight luminaires or luminaires where the reflector is close to the light source.
Customer Support
Bailey Electric & Electronics bv Everdenberg 21 4902TT Oosterhout Netherlands
+31 (0)162 52 2446 | www.bailey.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>