SNOWJOE 24V-SS10-CT Cordless Snow Shovel User Manual

June 4, 2024
SnowJoe

24V-SS10-CT Cordless Snow Shovel
*User Manual
24V MAX
  10-INCH
**

IMPORTANT!

Safety Instructions
All Operators Must Read These Instructions Before Use

Read all instructions before using this cordless snow shovel.
Basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury.

General Safety WARNINGS!

You and any other operator of this snow shovel must read, understand and follow these instructions in their entirety, and should reread them at the start of each snow season. Failure to follow these instructions may result in ELECTRIC SHOCK, FIRE, and/or serious PERSONAL INJURY.
Notice the personal safety alert symbol m used in this manual to draw your attention to a WARNING given along with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and AWARENESS.

  1. Keep work area clean and well lit – Cluttered, dark areas invite accidents.

  2. Use the right product – Do not use this machine for any job except that for which it is intended.

  3. Replacement parts – When servicing this unit, use only identical replacement parts. Replace or repair the damaged cord immediately on the charger.
    Do not use on gravel surfaces unless the snow shovel is adjusted for such surfaces in accordance with the operator’s manual.

  4. Keep children, bystanders, and pets away – All spectators, including pets, should be kept at a safe distance away from the work area.

  5. Dress properly – Do not wear loose articles of clothing or jewelry. They can become caught in moving parts.
    Wear rubber boots.
    The cordless snow shovel should not be operated in the hand-held position except when the instructions provided in this manual deem such use permissible.

  6. Avoid accidental starting – Make sure the safety switch and the trigger switch are in the off position before inserting the battery into the unit. Do not carry the cordless snow shovel with the safety switch and the trigger switch engaged.

  7. Moving parts – Keep hands and feet away from moving parts. Keep guards in place and in proper working order.

  8. mCAUTION! Exercise caution to avoid slipping or falling.
    Wear protective footwear that will protect your feet and improve your footing on slippery surfaces.

  9. Use safety glasses – Also use safety footwear, snug-fitting clothing, protective gloves, hearing, and head protection.

  10. Stay alert – Watch what you are doing. Use common sense. Do not operate the cordless snow shovel when you are tired or under the influence of alcohol or drugs.

  11. Do not force the tool – It will perform better with less likelihood of personal or mechanical injury if it is used at the rate for which it was designed.

  12. Do not overreach – Keep proper footing and balance at all times.

  13. If the cordless snow shovel strikes a foreign object, follow these steps:
    • Stop the cordless snow shovel. Remove the battery.
    • Inspect for damage.
    • Repair any damage before restarting and operating the snow shovel.

  14. Disconnect the tool – Turn off the cordless snow shovel and remove the battery when it is not in use, before servicing it, when changing accessories and when performing any other maintenance task.

  15. Store idle tools indoors – When not in use, the cordless snow shovel should be stored indoors in a dry, locked place out of the reach of children.

  16. Maintain the cordless snow shovel with care – Follow the applicable maintenance instructions for replacing parts and changing accessories. Lubrication is not required.

**** This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Improperly using or maintaining this cordless snow shovel could result in injury or death. To reduce this potential, comply with the following safety instructions.

SAVE THESE INSTRUCTIONS
This cordless snow shovel can amputate hands and feet if used incorrectly. It can also pick up foreign objects, which can become dangerous projectiles when thrown into the air. Failure to observe the following safety instructions could result in serious personal injury.

Training

  • Read, understand, and follow all instructions on the machine and in the manual before operating this unit. Thoroughly familiarize yourself with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

  • Children should never be allowed access to the equipment.
    Adults should never operate the equipment without carefully reading and understanding these instructions.

  • Keep the area of operation clear of all persons, particularly small children, and pets.

  • Exercise caution to avoid slipping or falling.

Preparation

  • Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.
  • Do not operate the equipment without wearing adequate winter garments. Avoid loose-fitting articles of clothing that can become caught in moving parts. Wear footwear that will improve footing on slippery surfaces.
  • Do not attempt to clear snow from gravel or crushed rock surface. This product is intended for use only on paved surfaces.
  • Never attempt to make any adjustments while the motor is running (except when specifically recommended by the manufacturer).
  • Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect your eyes from foreign objects that may be thrown from the machine.

Operation

  • Do not put hands or feet near or under rotating parts.
    Keep clear of the discharge opening at all times.

  • Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

  • After striking a foreign object, stop the motor. Thoroughly inspect the cordless snow shovel for any damage, and repair the damage before restarting and operating the cordless snow shovel.

  • If the unit should start to vibrate abnormally, stop the motor and check the unit immediately to ascertain the cause.
    Vibration is generally a sign of trouble.

  • Stop the motor and remove the battery whenever you leave the operating position, when transporting the unit, before unclogging the rotor blade housing and when
    making any repairs, adjustments, or inspections to the unit.

  • When cleaning, repairing, or inspecting the cordless snow shovel, make sure that all moving parts have come to a complete stop before beginning work.

  • Exercise extreme caution when operating on slopes.

  • Never operate the cordless snow shovel without proper guards and other safety devices in place and in proper working order.

  • Never direct the discharge toward people or areas where property damage can occur. Keep children, pets, and other bystanders away from the work area.

  • Do not overload the machine capacity by attempting to clear snow at too fast a rate.

  • Look behind and use care when backing up with the cordless snow shovel.

  • Never operate the cordless snow shovel without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk, never run, with the unit.

Clearing a Clogged Rotor Housing
Hand contact with the rotating rotor blades inside the rotor housing is the most common cause of injury associated with cordless snow shovels. Never use your hands to clear a
clogged rotor housing.
To clear the rotor housing:

  • Shut the motor off and remove the battery.
  • Wait 10 seconds to be sure the rotor blades have come to a complete stop.
  • Always use a clean-out tool, not your hands, to free the rotating blades.

Maintenance and Storage

  • Check all fasteners at frequent intervals for proper tightness to ensure that the equipment is in safe working condition.
  • Always refer to the operator’s manual for important details, such as how to properly store your cordless snow shovel for an extended period of time.
  • Maintain or replace safety and instruction labels as needed.
  • Run the machine a few minutes after throwing snow to prevent the rotor blades from freezing.

Battery + Charger Safety Instructions

NOTE : This unit is a core tool. The battery and the charger are not included. They must be purchased separately.
Model 24V-SS10-CT is compatible with the iON+ 24V System batteries and chargers. See page 13 for more information.
We pay a great deal of attention to the design of every battery pack to ensure that we supply you with batteries that are safe, durable and have a high energy density. The battery cells have a wide range of safety devices. Each individual cell is initially formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the best possible battery packs.
Despite all the safety precautions, caution must always be exercised when handling batteries. The following points must be obeyed at all times to ensure safe use. Safe use can only be guaranteed if undamaged cells are used. Incorrect handling of the battery pack can cause cell damage.
IMPORTANT! Analyses confirm that incorrect use and poor care of high- performance batteries are the main factors responsible for personal and/or product damage.
warning! Use only approved replacement batteries; other batteries may damage the cordless snow shovel and cause it to malfunction, which can lead to serious personal
injury.

WARNING! Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
Have your battery pack serviced by a qualified repair person using only identical replacement parts? This will ensure that the safety of the battery pack is maintained.

CAUTION! To reduce the risk of injury, charge the  iON+ 24V lithium-ion battery pack only in its designated iON+ 24V lithium-ion charger. Other types of chargers present a risk of fire, personal injury, and damage. Do not wire a battery pack to a power supply plug or car cigarette lighter. Such misuse will permanently disable or damage the battery pack.

  • Avoid dangerous environments – Do not charge the battery pack in rain, snow, or in damp or wet locations.
    Do not use the battery pack or charger in the presence of explosive atmospheres (gaseous fumes, dust, or flammable materials) because sparks may be generated when inserting or removing the battery pack, which could lead to a fire.

  • Charge in a well-ventilated area – Do not block the charger vents. Keep them clear to allow for proper ventilation. Do not allow smoking or open flames near a charging battery pack. Vented gases may explode.
    NOTE: The safe temperature range for the battery is 41°F – 105ºF (5°C – 40.5°C). Do not charge the battery outside in freezing weather; charge it at room temperature.

  • Maintain charger cord – When unplugging the charger, pull the plug, not the cord, from the receptacle to reduce the risk of damage to the electrical plug and cord.
    Never carry the charger by its cord or yank it by the cord to disconnect it from the receptacle. Keep the cord away from heat, oil, and sharp edges. Make sure the cord will not be stepped on, tripped over, or subjected to damage or stress when the charger is in use. Do not use the charger with a damaged cord or plug. Replace a damaged charger immediately.

  • Do not use an extension cord unless it is absolutely necessary – Using the wrong, damaged, or improperly wired extension cord poses a risk of fire and electric shock.
    If an extension cord must be used, plug the charger into a properly wired 16 gauge or larger extension cord with the female plug matching the male plug on the charger. Make sure that the extension cord is in good electrical condition.

  • Check the rated input for the charger before using – The charger must be plugged into an appropriate receptacle.

  • Use only recommended attachments – Use of an attachment not recommended or sold by the battery charger or battery pack manufacturer may result in a risk of fire, electric shock, or personal injury.

  • Unplug the charger when not in use – Make sure to remove battery packs from unplugged chargers.

warning! To reduce the risk of electric shock, always unplug the charger before performing any cleaning or maintenance. Do not allow water to flow into the charger.
Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards.

  • Do not burn or incinerate battery packs – Battery packs may explode, causing personal injury or damage.
    Toxic fumes and materials are created when battery packs are burned.

  • Do not crush, drop or damage battery packs – Do not use the battery pack or charger if they have sustained a sharp blow, been dropped, run over, or have been damaged
    in any way (i.e. pierced with a nail, hit with a hammer, stepped on, etc.).

  • Do not disassemble – Incorrect reassembly may pose a serious risk of electric shock, fire, or exposure to toxic battery chemicals. If the battery or charger is damaged, contact an authorized Snow Joe ® + Sun Joe ® dealer or call the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOW JOE (1-866-766-9563) for assistance.

  • Battery chemicals cause serious burns – Never let a damaged battery pack contact the skin, eyes, or mouth. If a damaged battery pack leaks battery chemicals, use rubber
    or neoprene gloves to safely dispose of it. If the skin is exposed to battery fluids, wash the affected area with soap and water and rinse with vinegar. If eyes are exposed to battery chemicals, immediately flush with water for 20 minutes and seek medical attention. Remove and dispose of contaminated clothing.

  • Do not short circuit – A battery pack will short circuit if a metal object makes a connection between the positive and negative contacts on the battery pack. Do not place a
    battery pack near anything that may cause a short circuit, such as paper clips, coins, keys, screws, nails, and other metallic objects. A short- circuited battery pack poses a risk
    of fire and severe personal injury.

  • Store your battery pack and charger in a cool, dry place – Do not store the battery pack or charger where temperatures may exceed 105ºF (40.5ºC), such as indirect
    sunlight or inside a vehicle or metal building during the summer.

Information about the battery

  1. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently.

  2. Store the battery pack in a cool place, ideally at 77°F (25°C), and charged to at least 40%.

  3. Lithium-ion batteries are subject to a natural aging process. The battery pack must be replaced at the latest when its capacity falls to just 80% of its capacity when new. Weakened cells in an aged battery pack are no longer capable of meeting the high power requirements needed for the proper operation of your snow shovel, and therefore pose a safety risk.

  4. Do not throw battery packs into an open fire as this poses a risk of explosion.

  5. Do not ignite the battery pack or expose it to fire.

  6. Do not exhaustively discharge batteries. The exhaustive discharge will damage the battery cells. The most common cause of the exhaustive discharge is lengthy storage or non-use of partially discharged batteries. Stop working as soon as the performance of the battery falls noticeably or the electronic protection system triggers. Place the battery pack in storage only after it has been fully charged.

  7. Protect batteries and the tool from overloads. Overloads will quickly result in overheating and cell damage inside the battery housing even if this overheating is not apparent externally.

  8. Avoid damage and shocks. Immediately replace batteries that have been dropped from a height of more than one meter or those that have been exposed to violent shocks,
    even if the housing of the battery pack appears to be undamaged. The battery cells inside the battery may have suffered serious damage. In such instances, please read the waste disposal information for proper battery disposal.

  9. If the battery pack suffers overloading and overheating, the integrated protective cutoff will switch off the equipment for safety reasons.
    IMPORTANT! Do not press the ON/OFF switch anymore if the protective cut- off has been activated. This may damage the battery pack.

  10. Use only original battery packs. The use of other batteries poses a fire risk and may result in injuries or an explosion.

Information about the charger and the charging process

  1. Please check the data marked on the rating plate of the battery charger. Be sure to connect the battery charger to a power supply with the voltage marked on the rating plate. Never connect it to a different mains voltage.

  2. Protect the battery charger and its cord from damage. Keep the charger and its cord away from heat, oil, and sharp edges. Have damaged cords repaired without delay by a qualified technician at an authorized Snow Joe ® + Sun Joe ® dealer or call the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOW JOE (1-866-766-9563).

  3. Electrical plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.

  4. Keep the battery charger, battery pack(s), and cordless tool out of the reach of children.

  5. Do not use the supplied battery charger to charge other cordless tools.

  6. During periods of heavy use, the battery pack will become warm. Allow the battery pack to cool to room temperature before inserting it into the charger to recharge.

  7. Do not overcharge batteries. Do not exceed the maximum charging times. These charging times only apply to discharged batteries. Frequent insertion of a charged or partially charged battery pack will result in overcharging and cell damage. Do not leave batteries in the charger for days on end.

  8. Never use or charge batteries if you suspect that it has been more than 12 months since the last time they were charged. There is a high probability that the battery pack
    has already suffered dangerous damage (exhaustive discharge).

  9. Charging batteries at a temperature below 41°F (5°C) will cause chemical damage to the cells and may cause a fire.

  10. Do not use batteries that have been exposed to heat during the charging process, as the battery cells may have suffered dangerous damage.

  11. Do not use batteries that have suffered curvature or deformation during the charging process or those that exhibit other atypical symptoms (gassing, hissing, cracking, etc.).

  12. Never fully discharge the battery pack (the maximum recommended depth of discharge is 80%). A complete discharge of the battery pack will lead to premature aging of the battery cells.

Protection from environmental influences

  1. Wear suitable work clothes. Wear safety goggles.

  2. Protect your cordless tool and the battery charger from moisture and rain. Moisture and rain can cause dangerous cell damage.

  3. Do not use the cordless tool or the battery charger near vapors and flammable liquids.

  4. Use the battery charger and cordless tools only in dry conditions and at an ambient temperature of 41ºF – 105°F (5°C – 40.5°C).

  5. Do not keep the battery charger in places where the temperature is liable to reach over 105°F (40.5°C).
    In particular, do not leave the battery charger in a car that is parked in the sunshine.

  6. Protect batteries from overheating. Overloads, overcharging and exposure to direct sunlight will result in overheating and cell damage. Never charge or work with batteries that have been overheated – replace them immediately, if possible.

  7. Store the charger and your cordless tool only in dry locations with an ambient temperature of 41ºF – 105°F (5°C – 40.5°C). Store your lithium-ion battery pack in a cool, dry place at a temperature of 77°F (25°C). Protect the battery pack, charger, and cordless tool from humidity and direct sunlight. Only place fully charged batteries in storage (charged to at least 40%).

  8. Prevent the lithium-ion battery pack from freezing. Battery packs that were stored below 32°F (0°C) for more than 60 minutes must be discarded.

  9. When handling batteries, be wary of electrostatic charge.
    Electrostatic discharges can damage the electronic protection system and the battery cells. Avoid electrostatic charging and never touch the battery poles.

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate it.

Symbols Descriptions Symbols Descriptions
**** READ THE OPERATOR’S

MANUAL(S) – Read, understand, and follow all instructions in the user manual(s) before attempting
to assemble and operate.| | WARNING! Do not expose the unit to rain or wet conditions. Keep dry.
**| SAFETY ALERT – Indicates a precaution, a warning, or danger.| | DANGER! Cutting/dismemberment
hazard – Keep feet away from the
rotating auger.
| Wear hearing protection.
Wear eye protection.
Wear breathing protection.| |
CAUTION! Beware of stones and other foreign objects that could be thrown from the appliance.
| Wear safety gloves during use to protect your hands.| | Wear safety footwear at all times to provide protection against objects that may accidentally fall on your feet.
| Do not use your hands to unclog the chute.| |
DANGER**! Cutting/dismemberment
hazard – Keep hands away from the
rotating auger. Do not use your hands to
unclog the rotor housing. Stop the motor
before removing debris.
| Keep hands, feet, and clothing away from the rotating auger to avoid injury.| | Keep bystanders and children at a safe distance (at least 11 yd/10 m) away from the work area.
| The rotating part will continuously run for several seconds after you turn off the machine.| | Indoor use only. Only use a battery charger indoors.

Know Your Cordless Snow Shovel
Read the owner’s manual and safety rules carefully before operating your cordless snow shovel. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

SNOWJOE 24V-SS10-CT Cordless Snow Shovel

1. Upper handle
2. ON/OFF trigger switch
3. Battery compartment
4. Handle knob
5. Joint-fixing knob, washer, and bolt (2)
6. Middle pole
7. Lower pole| 8. Motor housing
9. Scraper blade
10. Auger blade
11. Upper pole
12. Auxiliary handle
13. Safety switch
---|---
SOLD SEPARATELY| Battery + Charger options available at snowjoe.com
---|---
SNOWJOE 24V-SS10-CT Cordless Snow Shovel - SOLD
SEPARATELY

Technical Data

Motor …………………………………………………………… 210 W brush
Battery Voltage Max. ………………………………………….. 24V D.C.
No Load Speed …………………………………………………. 2500 rpm
Rotor ……………………………………… 2-blade plastic paddle auger
Clearing Width ……………………………………………10 in. (25.4 cm)
Depth of Snow Cut ………………………………………….6 in. (15 cm)
Throw Distance Max. …………………………………………. 20 ft (6 m)
Plowing Capacity Max. ………………….. 68 lbs/min (30.8 kg/min)
Net Weight ………………………………………………….8.1 lbs (3.7 kg)
Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage under typical load is 21.6 volts.

Unpacking

Carton Contents

  • Cordless snow shovel upper pole assembly
  • Cordless snow shovel lower pole assembly
  • Middle pole
  • Joint-fixing knob, washer, and bolt (2 sets)
  • Manual with registration card

NOTE: In order to operate this cordless snow shovel you will need iON+ 24V System batteries and chargers. See page 13 for battery options and specifications, or visit snowjoe.com.

  1. Carefully remove the cordless snow shovel and check to see that all of the above items are supplied.
  2. Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store. Please call the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOW JOE (1-866-766-9563).
    NOTE : Do not discard the shipping carton and packaging material until you are ready to use your new cordless snow shovel. The packaging is made of recyclable materials.
    Properly dispose of these materials in accordance with local regulations.

IMPORTANT! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils, or small parts. These items can be swallowed and pose a suffocation risk!

Battery Pack Operation

The equipment is powered by a lithium-ion battery. The battery pack is completely sealed and maintenance-free.

TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY

In order to operate this cordless snow shovel, you will need an iON+ 24V System battery and charger. See page 13 for battery and charger options and specifications, or for more information visit snowjoe.com.

Battery Charge Level Indicator
The battery pack is equipped with a push button for checking the charge level. Simply press the push button to read off the battery charge level from the LEDs of the battery indicator:

  • All 3 level monitoring LEDs are lit: Battery charge level is high.
  • 2 level monitoring LEDs are lit: Battery charge level is decreasing. Stop work as soon as possible.
  • 1 level monitoring LED is lit: Battery is flat. Stop work IMMEDIATELY and charge the battery. Otherwise, the battery’s service life will be greatly shortened.

Lights Light Indicators
Charge level button
The battery is at 30% capacity and requires charging
The battery is at 60% capacity and requires charging soon
The battery is at full capacity

NOTE : If the charge level button does not appear to be working, insert the battery into the charger and charge as needed.
NOTE : Immediately after using the battery pack, the charge level button may display a lower charge than it will if checked a few minutes later. The battery cells “recover” some of their charges after resting.

Charger Operation

TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY

In order to operate this cordless snow shovel, you will need an iON+ 24V System battery and charger. See page 13 for battery and charger options and specifications, or for more information visit snowjoe.com.

WARNING! Charge only iON+ 24V lithium-ion battery packs with its compatible iON+ 24V lithium-ion quick charger.
Other types of batteries may cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to flow into the charger’s AC/DC plug.
When to Charge the iON+ 24V
Lithium-Ion Battery
NOTE : The iON+ 24V lithium-ion battery packs do not develop a “memory” when charged after only a partial discharge.
Therefore, it is not necessary to run down the battery pack before placing it into the charger.

  • Use the battery charge indicator lights to determine when to charge your iON+ 24V lithium-ion battery pack.
  • You can “top off” your battery pack’s charge before starting a big job or after a long day of use.

Charging the Battery

  1. Press the push lock buttons on the battery to pull the battery pack out of the equipment (Fig. 1).
    SNOWJOE 24V-SS10-CT Cordless Snow Shovel - Fig. 1

  2. Depending on your Snow Joe ® + Sun Joe ® charger model, how to recharge your lithium-ion battery will vary.You may either insert your 24-volt battery into the  4VCHRG-QC Quick Charger (sold separately) or the 24VCHRG-DPC Dual Port Charger (sold separately) (Figs. 2 – 3).SNOWJOE 24V-SS10-CT Cordless Snow Shovel - Fig. 2SNOWJOE 24V-SS10-CT Cordless Snow Shovel - Fig. 3

  3. The battery indicator LEDs will illuminate one by one during the charging process. Unplug the charger immediately when the 3 LEDs are all illuminated.

  4. The 24VCHRG-QC Quick Charger (sold separately) and the 24VCHRG-DPC Dual Port Charger (sold separately) are also equipped with additional charging indicating
    lights which will indicate the charging status (Figs. 2 – 3).
    CAUTION! FIRE HAZARD. When disconnecting the charger from the battery, be sure to unplug the charger from the outlet first, then disconnect the charger from the battery.
    WARNING! The chargers do not automatically turn off when the battery is fully charged. Please take care not to leave the battery plugged into the charger. Switch off or unplug the charger at the mains when charging is complete.

  5. Timely recharging of the battery will help prolong the battery’s life. You must recharge the battery pack when you notice a drop in the equipment’s power.
    IMPORTANT! Never allow the battery pack to become fully discharged as this will cause irreversible damage to the battery.

  6. When charging is complete, remove the battery from the charger by pulling the push lock button and sliding the battery backward to unlock it from the charger.

Assembly
Connecting the Poles

  1. Slide the middle pole into the lower pole assembly and the upper pole assembly. Align the screw holes (Fig. 4).
    SNOWJOE 24V-SS10-CT Cordless Snow Shovel - Fig. 4

  2. Insert the joint-fixing bolts through the aligned holes in the poles and secure the other end with the washers and the joint-fixing knobs (Fig. 5). Twist until tight.
    NOTE : You may have to carefully move the wiring inside the tube to one side if it blocks the path of the bolt.SNOWJOE 24V-SS10-CT Cordless Snow
Shovel - Fig. 5

Operation

WARNING! Keep the area to be cleared free of stones, toys, or other foreign objects that the rotor blades might pick up and throw. Such items could be covered by snow and are easy to overlook, so be sure to conduct a thorough inspection of the area before beginning work.

TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY

In order to operate this cordless snow shovel, you will need an iON+ 24V System battery and charger. See page 13 for battery and charger options and specifications, or for more information visit snowjoe.com.

Starting the Machine

  1. Slide the battery down in the battery compartment until it clicks to lock it into position (Fig. 6).
    SNOWJOE 24V-SS10-CT Cordless Snow Shovel - Fig. 6

  2. To start the cordless snow shovel, push and hold the safety lock switch on the side of the handle grip with your thumb and then squeeze the trigger switch with your fingers. Once the machine powers on, you can release the safety lock switch and proceed with operation (Fig. 7).SNOWJOE 24V-SS10-CT Cordless Snow Shovel - Fig. 7

  3. To stop the cordless snow shovel, release the trigger switch.

Handle Adjustment
To adjust the angle of the auxiliary handle, follow the instructions below:

  1. Stop the machine and remove the battery. Wait until the blade comes to a complete stop.
  2. Loosen the auxiliary handle by turning the handle knob counterclockwise. Rotate the auxiliary handle to a comfortable position (Fig. 8).SNOWJOE 24V-SS10-CT Cordless Snow Shovel - Fig. 8
  3. Fix the handle by tightening the handle knob. Insert the battery and resume working.

To adjust the position of the auxiliary handle, follow the instructions below:

  1. Stop the machine and remove the battery. Wait until the blade comes to a complete stop.
  2. Loosen the handle knob slightly and adjust the auxiliary handle as needed to the desired position. Retighten the handle knob securely (Fig. 9).SNOWJOE 24V-SS10-CT Cordless Snow Shovel - Fig. 9
  3. Insert the battery and resume working.

NOTE : In order to prevent the auxiliary handle from moving around or sliding on the pole, be sure to tighten it securely.

Operating Tips

  • Start the cordless snow shovel. Push the shovel forward at a comfortable rate, yet slow enough to clear the path completely. The clearing width of the snow shovel and the
    depth of snowfall should dictate your forward speed.

  • Direct the snow discharge to the right or to the left by holding the cordless snow shovel at a slight angle.

  • To remove snow most efficiently, throw the snow downwind and slightly overlap each swath.

  • If you need to clear snow from a crushed rock or gravel surface, push down on the handle to keep the scraper blade clear of any loose material that the rotor blades could throw.

  • This cordless snow shovel cuts a path 10 in. (25.4 cm) wide and up to 6 in. (15 cm) deep in one pass.

  • When clearing deeper drifts, hold the cordless snow shovel by the upper and lower handles and use a swinging or sweeping motion. Remove up to 6 in. (15 cm) of snow with each pass and repeat as many times as needed.

  • Remove the battery after using the cordless snow shovel. Hang the shovel so it will not be misplaced or damaged.

Maintenance

To order genuine replacement parts or accessories for the Snow Joe ® 24V- SS10-CT cordless snow shovel, please visit snowjoe.com or contact the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOW JOE (1-866-766-9563).

Proper Care for Battery + Charger

WARNING! To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger before performing any maintenance task. Never disassemble the battery pack or charger. Contact your Snow Joe ® + Sun Joe ® dealer or the Snow Joe ® + Sun Joe ® customer service center for ALL repairs.

  1. To reduce the risk of injury and damage, never immerse your battery pack or charger in liquid or allow any liquid to flow inside these components.
  2. Clean out dust and debris from charger vents and electrical contacts by blowing with compressed air.
  3. Use only mild soap on a damp cloth to clean the battery pack and charger, keeping away from all electrical contacts. Certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia, and household detergents containing ammonia. Never use flammable or combustible solvents around battery packs, battery chargers, or tools.
  4. The iON+ 24V lithium-ion battery chargers have no serviceable parts.

Lubricating the Cordless Snow Shovel
This cordless snow shovel does not need lubrication.
All bearings are lubricated at the factory for the life of the product.

Storage

  1. Examine the cordless snow shovel thoroughly for worn, loose, or damaged parts. Should you need to repair or replace a part, contact an authorized Snow Joe ® + Sun Joe
    ® dealer or call the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOW JOE (1-866-766-9563) for assistance.

  2. Remove the battery from the cordless snow shovel before storing it.

  3. Store the cordless snow shovel indoors in a locked, dry place out of the reach of children to prevent unauthorized use or damage.

Battery + Charger Off-Season Storage

  1. Do not expose your battery pack or charger to water, or rain or allow them to get wet. This could permanently damage the charger and the battery pack. Do not use oil or solvents to clean or lubricate your battery pack as the plastic casing can become brittle and crack, causing a serious risk of injury.

  2. Store the battery pack and charger at room temperature away from moisture. Do not store in damp locations where corrosion of terminals may occur. As with other battery
    pack types, permanent capacity loss can result if the pack is stored for long periods of time at high temperatures (over 120ºF/49ºC).

  3. iON+ 24V lithium-ion battery packs maintain their charge during storage longer than other battery pack types.
    As a general practice, it is best to unplug the battery charger and remove the battery pack when they are not in use. Recharge the battery pack every 6 months to 50% capacity (2 lights on) during off-season storage to maintain optimal battery performance.

Battery Caution + Disposal
Always dispose of your battery pack according to federal, state, and local regulations. Contact a recycling agency in your area for recycling locations.
CAUTION! Even discharged battery packs contain some energy. Before disposing of, use electrical tape to cover the terminals to prevent the battery pack from shorting, which could cause a fire or explosion.

WARNING! To reduce the risk of injury or explosion, never burn or incinerate a battery pack even if it is damaged, dead, or completely discharged. When burned, toxic fumes and materials are emitted into the surrounding atmosphere.

  1. Batteries vary according to the device. Consult your manual for specific information.
  2. Install only new batteries of the same type in your product (where applicable).
  3. Failure to insert batteries in the correct polarity, as indicated in the battery compartment or manual, may shorten the life of the batteries or cause batteries to leak.
  4. Do not mix old and new batteries.
  5. Do not mix Alkaline, Standard (Carbon-Zinc), or Rechargeable (Nickel Cadmium, Nickel Metal Hydride, or Lithium-Ion) batteries.
  6. Do not dispose of batteries in a fire.
  7. Batteries should be recycled or disposed of as per state and local guidelines.

Service and Support
If your Snow Joe ® 24V-SS10-CT cordless snow shovel requires service or maintenance, please call the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOW JOE (1-866-766-9563).

Model and Serial Numbers
When contacting the company, reordering parts, or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit. Copy these numbers into the space provided below.SNOWJOE 24V-SS10-CT Cordless Snow
Shovel - provided below

Optional Accessories

WARNING! ALWAYS use only authorized Snow Joe ® + Sun Joe ® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this cordless snow shovel. Contact Snow Joe ® + Sun Joe ® if you are unsure whether it is safe to use a particular replacement part or accessory with your cordless snow shovel. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

Accessories Item Model
iON+ 24V 2.0 Ah Lithium-Ion Battery
Battery Runtime Max: 30 min 24VBAT-LTE
iON+ 24V 2.5 Ah Lithium-Ion Battery
Battery Runtime Max: 37 min 24VBAT-LT
iON+ 24V 4.0 Ah Lithium-Ion Battery
Battery Runtime Max: 1 hr 24VBAT
iON+ 24V 5.0 Ah Lithium-Ion Battery
Battery Runtime Max: 1 hr 15 24VBAT-XR
iON+ 24V Lithium-Ion Battery Quick Charger 24VCHRG-QC
iON+ 24V Lithium-Ion Battery Dual Port Charger 24VCHRG-DPC

NOTE : Accessories are subject to change without any obligation on the part of Snow Joe ® + Sun Joe ®. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOW JOE (1-866-766-9563).

SNOW JOE ® + SUN JOE ® CUSTOMER PROMISE

ABOVE ALL ELSE, Snow Joe, LLC (“Snow Joe”) is dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a Snow Joe ®, Sun Joe ®, or Aqua Joe ® product (“Product”) does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we have a Limited Warranty (“Warranty”) for our Products.
OUR WARRANTY:
Snow Joe warrants new, genuine, powered, and non-powered Products to be free from defects in material or workmanship when used for ordinary household use for a period of two years from the date of purchase by the original, end-user purchaser when purchased from Snow Joe or from one of Snow Joe’s authorized sellers with proof of purchase. Because Snow Joe is unable to control the quality of its Products sold by unauthorized sellers, unless otherwise prohibited by law, this Warranty does not cover Products purchased from unauthorized sellers. If your Product does not work or there’s an issue with a specific part that is covered by the terms of this Warranty, Snow Joe will elect to either (1) send you a free replacement part, (2) replace the Product with a new or comparable product at no charge, or (3) repair the Product. How cool is that! This Warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
PRODUCT REGISTRATION:
Snow Joe strongly encourages you to register your Product. You can register online at snowjoe.com/register, or by printing and mailing in a registration card available online from our website, calling our Customer Service Department at 1-866-SNOW JOE (1-866-766-9563), or by emailing us at help@snowjoe.com. Failure to register your Product will not diminish your warranty rights. However, registering your Product will allow Snow Joe to better serve you with any of your customer service needs.
WHO CAN SEEK LIMITED WARRANTY COVERAGE:
This Warranty is extended by Snow Joe to the original purchaser and original owner of the Product.
WHAT IS NOT COVERED?
This Warranty does not apply if the Product has been used commercially or for non-household or rental applications. This Warranty also does not apply if the Product was purchased from an unauthorized seller. This Warranty also does not cover cosmetic changes that do not affect performance. Wearing parts like belts, augers, chains, and tines are not covered under this Warranty and can be purchased at snowjoe.com or by calling 1-866-SNOW JOE (1-866-766-9563).

snowjoe.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SnowJoe User Manuals

Related Manuals