ErGear EGESD9B Electric Standing Desk Adjustable Height Instruction Manual

ErGear EGESD9B Electric Standing Desk Adjustable Height

Specifications

Supplied Parts and Hardware

Step 1:

Step 2

Step 3

Step 4

Step 5

Step 6

Setting the Desk Legs to the Same Height
Before attaching the transmission rod, measure the heights of the two desk legs to see if they are set at the same level. If not, insert the transmission rod into the hole in the right leg. Turn the rod to adjust the right leg so it’s level with the left leg. Turn the rod anti-clockwise to lower the right leg or clockwise to raise it.

HEAVY! You may need assistance with this step.

INSTALLATION

Step 1 Attaching the Transmission Rod and the Crossbar

Step 2: Attaching the Side Plates
HEAVY! You may need assistance with this step.

Step 3: Attaching the Leg Bases

You can use the foot pads or casters.

Step 4 Assemble the desktop.
Assembling and Attaching the Desktop

Secure the desktop panels with the connectors. Then attach the hooks and controller to the desktop.

Place rubber pads on the desktop screw holes.

Attach the frame to the desktop.

Step 5   Connecting the Cables

Step 6 Installing the Cable Hole Covers

Note: If the desk, used with foot pads, is a bit uneven on the floor, slightly screw in or unscrew the foot pads to level each corner.

Using the Controller

• Raise the Desk
  Press the button to raise the desk continuously until it reaches the highest position or the button is released.

• Lower the Desk
  Press the button to lower the desk continuously until it reaches the lowest position or the button is released.

• Select Height Setting 1
  Press the 1 button, and the desk will move to the height that was previously set for that button.

• Select Height Setting 2
  Press the 2 button, and the desk will move to the height that was previously set for that button.

• Select Height Setting 3
  Press the 3 button, and the desk will move to the height that was previously set for that button.

• Save Current Height Setting
  Short-press the 8 buttons, and the screen will show ‘S-. Press the 1, 2 ), or 3 buttons to save the current height setting to that button. When you press the 1, 2) , or 3 buttons, the desk will move to the height that was previously set for that button. Any button press will stop the desk.

Settings

Reset
Press and hold the button until ‘rest’ is displayed. Continue holding until the desk goes down to its lowest level and comes back up slightly. Release the button, and the reset is complete. If the button is released during the reset procedure, the reset will stop. The desk won’t work until the reset is done correctly.
Child Lock
Press and hold the buttons together for 5 seconds to turn the child lock on. The screen will show ‘LOC’ and the buttons will be disabled.
Turn the child lock off the same way.
Settings Menu
Press and hold the ( 8 button for 5 seconds to enter the settings menu. Short-press the 8 buttons to navigate through the menu. Short-press the button to adjust the settings. Long-press the button to quickly adjust the height settings. Press and hold the 8 button again to save the changes. ‘SUS’ will be displayed if saving is successful (or ‘FAL’ if saving fails). If there is no button pressed for 10 seconds, the settings menu will be exited automatically.

Power-Saving Mode
The screen will turn off if there is no button-press for a minute. Any button- press will turn the screen on again.

Complete Flexibility. Total Freedom.
Thank you for choosing this product. We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us.

Technical Support

(US/CA) 1-800-651-9525 Mon-Fri, 8am-8pm (CST)
(UK) 44-808-196-3875
Mon-Fri, 2 pm-10 pm (UTC)

• Other Info:support@ergear.com
• Website:https://ergear.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>