VEVOR 9527 6.5 Inch Mechanic Bench Vise Instruction Manual
- June 16, 2024
- VEVOR
Table of Contents
Bench Vice
Operating Instruction
6.5inch Mechanic Bench Vise
Model：9527
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
****Customer[email protected]
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SPECIFICATIONS
| Model: | 9527 |
|---|---|
| Designation: | 6.5inch Mechanic Bench Vise |
| Material: | Ductile Iron |
| Overallsize: | 365165189mm |
| Baking width: | 167mm |
| Maximum opening: | Forward Opposite direction 165mm, direction235mm |
| Maximum clamping force: | 20KN |
| Color: | Grey+Orange |
| Weight: | About 13.7kg |
DESCRIPTION
- Solid Ductile iron
- Rotation table 360° rotation
- Suitable for installation on the table.
PACKAGE
- 1 x Bench Vise Table Top Clamp Press
- 1 x User Manual
- 4 x Nuts
- 4 x Screws
- 1 x Base mount paperboard
- 1 x Mat nylon clamp mouth pad
APPLICATION
Bench vice is used to clamp workpieces. It is installed on the work stations to clamp the workpieces. It is an necessary tool in the schlosserei. Rotating disc type clamp body can revolve so that make the workpiece rotate to the suitable place. Most work of fitter are fini- shed on the bench vice. For example, the saw, the file, the chisel and components in stalling and dismantling.
INSTALLATION
Install the pliers on the clamp table
-
Operating instruction
The height of operator working will be suitable because the bench vice is installed on the work bench. Usually the jaw height is flushed with elbow just right. This is ok.
Put the elbow on the bench vice peak and half clenched fists that the fist just support the mandible. Length and width of work bench will be decided by the work. -
Cautions
（1）Appropriate degree of tightness when clamp the workpiece.
Just tight the hand shank by the hand only. Do not add strength with the help of other tools. No clamp-holding force shall be exceeded .
（2）When work strongly, you need try your best to make strength facing to clamp body.
（3）Do not knocking on the clamp body and smooth surface.
（4）Clean and lubricate the surface of lead screw and nut so that it will not rust.
Manufacturer:WEIFANG JINTAILAI BENCH VISE MANUFACTURING CO.,LTD
Address:TA ER BAO INDUSTRIAL PARK,CHANGYI CITY, SHANDONG,CHINA
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
EUREP GmbH Unterlettenweg 1a, 85051 Ingolstadt, Germany
EUREP UK LTD UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH
Made in china
E-mail: [email protected]