WUBEN X2 2,500 High Lumens Outdoor Pocket Flashlight User Manual
- June 16, 2024
- WUBEN
Table of Contents
- X2 2,500 High Lumens Outdoor Pocket Flashlight
- Packaging
- About The Flashlight
- Mounting Brackets Installation
- Operation Of The Flashlight
- Charging
- Battery Capacity Indication
- Maintenance
- Specifications
- Common Issues and Solutions
- Warranty Conditions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
X2 2,500 High Lumens
Outdoor Pocket Flashlight
User Manual
X2 2,500 High Lumens Outdoor Pocket Flashlight
X2
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170
00 Praha 7, www.alza.cz
Packaging
Before using this product, please check whether the contents of the package are complete.
About The Flashlight
Mounting Brackets Installation
Precautions for Charging with Type-C Charging Cable Lanyard
Operation Of The Flashlight
Caution! The product is initially locked when shipped from the factory. Upon receiving the product, please click the button four times to complete the initial unlock process.![WUBEN X2 2,500 High Lumens Outdoor Pocket Flashlight
-
Mounting Brackets 1](https://manuals.plus/wp- content/uploads/2024/01/WUBEN-X2-2500-High-Lumens-Outdoor-Pocket-Flashlight- Mounting-Brackets-1.png)
- Power On/Off: Click the switch to turn on the flashlight, and click again to turn it off. The flashlight has a memory function for the lighting brightness, but it does not remember the flashing mode or extremely bright mode.
- Default Output Selections: While the flashlight is turned on, long press the switch to cycle through the brightness levels: low – medium – high – low (cyclically). Release the switch at any level to lock the brightness.
- Quick Turbo: Regardless of the current state, double-click the switch to activate the ultra-bright mode. After entering the lighting mode, double-clicking the switch will return to the previous mode. Please note that double-clicking the switch in other modes is invalid.
- Quick Low: While the flashlight is off, long press the switch to enter the Low mode.
- Flash Modes: In any state, triple-click the switch to enter the strobe mode. Triple click again to cycle through the flashing modes: SOS – strobe. Reminder: By default, the product is locked when it leaves the factory. Upon receiving the product, please click the switch four times to complete the initial unlock.
- Lock/Unlock: In the power-off state, press the switch four times. The front light will flash three times, indicating that the lock is activated. Press the switch, and the indicator light will flash three times. Press the switch four times again, and the energy-saving mode will activate, indicating that the lock is released.
Programming Mode
To enter the programming mode and customize the brightness gear, follow these
steps: First, turn on the product by clicking the switch. Next, long-press the
switch to adjust the product to the desired gear that you want to customize.
Then, quickly double-click the switch and press it for the second click
without releasing it. This will enable you to change the brightness within the
corresponding gear’s lumen range. As you adjust the brightness, it will cycle
from small to large (and vice versa) within the gear. When you reach the
desired brightness level, release the switch to save the current brightness.
At this point, the brightness for that gear is successfully set to the current
level.
Mode | Brightness |
---|---|
Low | 5 – 100 Lumens |
Medium | 100 – 400 Lumens |
High | 400 – 800 Lumens |
Restore Factory Settings
To perform a factory reset on the flashlight, simply follow these steps: while
in the locked state, click the switch with a 0,5-second interval, then double
click the switch with the same interval, and finally triple click the switch.
This will activate the flashlight’s factory setting, turning on the minimum
light level and indicating that the switch lock has been released, while
restoring the factory default brightness.
Charging
Battery Capacity Indication
Maintenance
- Use WUBEN or recommended batteries.
- Charge or replace the battery promptly when low power is indicated to preserve battery durability.
- Store the product in a dry and well-ventilated area.
Specifications
Mode | Turbo | High | Medium | Low | Strobe | SOS |
---|---|---|---|---|---|---|
Brightness – OSRAM P9 | 2500 – 800 1m | 400 Im | 100 Im | 5 Im | 1000 Im | 200 Im |
Brightness -SAMSUNG LH351D | 1800 – 800 1m | 400 Im | 100 1m | 5 Im | 1000 Im |
2001m
Run Time| 1 m + 1 h| 2,5h| 10h| 80h| /| /
Distance of Beam
Projection| 146| m OSRAM| P9 / 128 m SAMSUNG| | LH351
D|
Intensity of Light
Source| 5300 cd OSRAM P9 / 4100 cd SAMSUNG LH351D
Drop Resistance| 1 m
Water Resistance| IP68 (2 m underwater)
Weight| 115 g With Battery
Dimensions| 85×39×20 mm| | | | |
The provided data is based on testing conducted by Wuben laboratory in accordance with the ANSI/NEMA FL1 standard, using the built-in 2000mAh battery pack. Please note that the actual results may vary due to differences in test environments and batteries.
Common Issues and Solutions
Issue: Abnormal Flashing or Failure to Turn On Possible Causes:
- The flashlight may be in lockout mode.
- The switch might not be turned on correctly.
- The battery might be low on power or improperly installed.
Solutions:
- Unlock the flashlight by following the lockout mode instructions in the user manual.
- Double-check if the switch is correctly turned on.
- Try charging the battery or reinstalling it correctly.
Issue: Abnormal Noise
Possible Cause:
- There may be damage to certain parts of the flashlight.
- There may be presence of foreign matter in the tube.
Solution:
- If any parts of the flashlight are damaged, please reach out to your local distributor for assistance.
- Ensure to remove any foreign matter from the flashlight’s tube.
Caution
- Prior to using the product, kindly read the user manual carefully.
- Exercise caution as the product may generate heat during operation to prevent any potential harm.
- Avoid direct exposure of the light to the eyes to prevent eye damage.
- Keep the product out of reach of children.
- Refrain from disassembling the product to maintain coverage under the WUBEN warranty policy.
- Do not dispose of the product in fire.
- Note that this product is not designed for prolonged underwater use and should not be used underwater for an extended period.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2
years. If you need repair or other services during the warranty period,
contact the product seller directly, you must provide the original proof of
purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other
relevant provisions of EU directives.
WEEE
This product must not be disposed of as normal household waste in accordance
with the EU Directive on Waste Electrical and Electronic Equipment (WEEE –
2012/19 / EU). Instead, it shall be returned to the place of purchase or
handed over to a public collection point for the recyclable waste. By
ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in
accordance with national regulations.
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- alza.at
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>