WUBEN Lightok X1 EDC Flashlight User Manual

June 12, 2024
WUBEN

WUBEN Lightok X1 EDC Flashlight User Manual

WUBEN Lightok X1 EDC Flashlight User Manual

Package List

Before using this product, please check whether the contents of the package are complete.

WUBEN Lightok X1 EDC Flashlight User Manual - Package
List

About Product

Installation

Clamp installation (optional)

WUBEN Lightok X1 EDC Flashlight User Manual -
Installation

Operation

WUBEN Lightok X1 EDC Flashlight User Manual -
Operation

Charging

WUBEN Lightok X1 EDC Flashlight User Manual - Charging

Battery Capacity (C) Status Indication

WUBEN Lightok X1 EDC Flashlight User Manual - Battery Capacity \(C\) Status
Indication

Parameters

WUBEN Lightok X1 EDC Flashlight User Manual -
Parameters

According to ANSI/NEMA FL1 standard, this data was tested by our laboratory by using two 21700 4800mAh batteries built in our laboratory. The data may be different due to different test environments and batteries.

Warnings

  • Please read user manual carefully before using the product.
  • Product will generate heat while working, please be cautious with that to avoid any possible harm.
  • Please don’t shine into eyes directly to avoid harm to eyes.
  • Please keep the product away from children.
  • Please use WUBEN or WUBEN recommended batteries.
  • Please don’t disassemble the product or it will not be covered by WUBEN warranty policy.
  • Please don’t throw the product into fire.
  • This is not a diving product, please don’t use it underwater for a long time.

Operation
Reminder: The product is set to be locked by default when it leaves the factory. After receiving the product, please click four times to complete the first unlock!

  1. ON/OFF: Click the Key to turn on the flashlight, and then click the button to turn off the flashlight. The flashlight has the function of memorizing the illumination brightness, and will not memorize the flashing mode and the Turbo mode.
  2. Default Output Selections: When the flashlight is on, press the Key for a long time to cycle the brightness of the flashlight: Eco-Low-Med-High-Eco Cycle. Release the switch in any gear to lock the brightness.
  3. Instant Turbo: In any state, double-click the Key to enter the Turbo file.
  4. Instant Low: Shut down, press, and hold Key to enter the energy-saving gear.
  5. Flash Modes: In any state, hit the Key three times to enter the flash mode, and hit it three times again to circularly switch the flash mode: SOS- flash.
  6. Lockout/Unlock: When the flashlight is turned off, press the Key four times, and the headlights will flash three times, indicating that it is locked. Press the Key and the indicator will flash three times. Press the key a fourth time again, and the energy-saving gear will light up, indicating that the lock is released.

Programming mode:
Before entering programming mode, first determine which brightness level(out of four) you’d like to customize, click tfo open the product, long press to adjust the product to the level you’d like to customize, and quickly double- click the power button and hold on. The brightness level loops within the corresponding lumen range from the lowest to the highest brightness level, (when reaching the upper range, the light flashes once and starts looping from the highest to the lowest brightness level), release the power button when the desired brightness is reached, the flashlight will automatically memorize the brightness level.

Restore Factory Settings: In the locked state, click the Key -every 0.5 seconds-double-click the key -every 0.5 seconds-and hit the key three times. The factory setting of the flashlight turns on the lowest brightness, indicating that the key lock is released, and the factory default brightness is restored.

Maintenance

  • Please use a WUBEN battery or WUBEN-recommended batteries.
  • When the product indicates low power, please charge or replace the battery in time to avoid affecting the durability of the battery.
  • Please store the product in a dry and ventilated place.

FAQs

WUBEN Lightok X1 EDC Flashlight User Manual - FAQ

If your problems are still not solved yet, please contact WUBEN Headquarters for after-sales service.

Warranty Policy

1. Warranty Coverage

  • 15-day replacement: Within 15 days from the date of purchase, if the product has any quality problems, you can request a free replacement.
  • 1-year warranty: Within 1 year from the date of purchase, if the product (accessories excluded) has quality problems, WUBEN will offer free repair for WUBEN registered customers.
  • Battery warranty: WUBEN offers a 1-year warranty for the rechargeable batteries, but other included accessories are not covered by the warranty.
  • Lifetime maintenance: From the date of purchase, if the product has a problem after 1 year, WUBEN will offer paid repair for WUBEN-registered customers.
  • If proof of purchase cannot be provided, it will be counted on the date of manufacture.
  • If there is any dispute, the two parties will coordinate to solve it.

2. Beyond Warranty

  • Man-made damage.
  • Damage caused by not following the instructions.
  • Damage caused by improper use of the battery.
  • Abnormal wear and tear.
  • Damage caused by irresistible factors.
  • Gifts.

The final interpretation right is reserved by WUBEN.

Special thanks to Matt Rogers for his assistance with the Wuben X1 manual.

The product complies EMC 2014/30/EU and RoHS 2011/ 65/EU as amended 2015/863/EU directives.
The product can be disposed of in electric waste only

SHENZHEN SHENGQI LIGHTING TECHNOLOGY CO., LTD.
Add: Floor 5, Building A, Zhenhan Industrial Park, No. 1 Zhenhan Road,
Jihua Street, Longgang District, Shenzhen,
Guangdong, China
E-mail: service@wubenlight.com
Web: www.wubenlight.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

WUBEN User Manuals

Related Manuals