speco P24S26G2 26 Port Gigabit Switch Owner’s Manual

: June 16, 2024
: Speco

Table of Contents

speco P24S26G2 26 Port Gigabit Switch
Specifications
Product Usage Instructions
Configuration
Features
Performance
Mechanical
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

speco P24S26G2 26 Port Gigabit Switch

speco-P24S26G2-26--Gigabit-Switch-PRODUCT

Specifications

Model: P24S26G2
Number of Ports: 26 (24 PoE ports, 2 SFP uplink ports)
Switching Capacity: 52Gbps
Throughput: 38.6Mpps
Packet Buffer: 4.1M
MAC Address Capacity: 8K
Jumbo Frame Support: 10KB
Transfer Mode: Store and Forward
MTBF (Mean Time Between Failures) : 100,000 hours
Network Protocol Standards: IEEE802.3 (10Base-T), IEEE802.3u (100Base-TX), IEEE802.3ab (1000Base-TX), IEEE802.3z (1000Base-FX), IEEE802.3x (Flow control)
PoE Protocol Standards: IEEE802.3af (15.4W), IEEE802.3at (30W)
Industry Standards for EMI: FCC Part 15 CISPR (EN55032) Class A
Industry Standards for EMS : EN61000-4-2 (ESD), EN61000-4-4 (EFT)
Shock Standard: IEC 60068-2-28
Free Fall Standard: IEC 60068-2-32
Vibration Standard: IEC 60068-2-6
Recommended Network Medium:
- 10Base-T: Cat3, Cat4, Cat5 or above UTP (100M)
- 100Base-TX: Cat5 or above UTP (100M)
- 1000Base-TX: Cat5 or above UTP (100M)
- Multimode Fiber : 50/125, 62.5/125, 100/140um
- Single Mode Fiber: 8/125, 8.7/125, 9/125, 10/125um
Operating Temperature : 14 to 122F (-10 to 50C), 10% to 90% non-condensing humidity
Storage Temperature : -40 to 158F (-40 to 70C), 5% to 90% non-condensing humidity
Mechanical Dimensions: 17.3 x 8 x 1.73 inches (440 x 205 x 44mm)
Weight: 8.6 lbs (3.9kg)
Power Voltage : Input Voltage – AC100-240V, 50/60Hz; Power Supply – 52V, 7.69A

Product Usage Instructions

Installation
To install the IP 26-Port Gigabit Switch with 24-PoE Ports and 2 SFP Uplink (Model: P24S26G2), follow these steps:

Choose a suitable location for the switch, ensuring proper ventilation and access to power outlets.
Connect the included power cord to the switch and plug it into a power outlet.
If using SFP uplink ports, insert the required SFP modules into the corresponding ports.
Connect network devices to the switch using Ethernet cables.
If applicable, attach the rack mount ears to the switch for mounting in a rack.

Configuration

The IP 26-Port Gigabit Switch can be configured using the following steps:

Connect a computer to one of the switch ports using an Ethernet cable.
Launch a web browser and enter the default IP address of the switch (refer to the user manual) in the address bar.
Enter the default login credentials (username and password) provided in the user manual to access the switch’s web interface.
Follow the on-screen instructions to configure various settings such as VLANs, QoS, and security options.
Save the configuration changes and restart the switch if required.

Usage
Once the IP 26-Port Gigabit Switch is installed and configured, you can start using it for network connectivity. Simply connect your network devices (e.g., computers, printers, IP cameras) to the switch’s ports using Ethernet cables. The switch will automatically detect and establish connections between devices.

Features

PoE Watchdog – Resets port automatically when data is not being transmitted. Great for surveillance cameras.
Link Extension Mode – Provides up to 250 meters of long-distance power transmission at 10Mbps
Port Isolation Mode – Isolates each port except for the uplink ports to provide extra security and network performance
Storm Control – Enables the switch to monitor traffic levels and to drop broadcast, multicast, and unknown unicast packets when a specified traffic level is exceeded.
Supports 802.3af/802.3at with a total PoE budget of 378W
Supports port lightning protection Surge: common mode 2KV, differential mode 1KV; static ESD: air 15KV, contact 8KV

I/O Interface

Power Input: AC 100-240V, 50/60Hz
Ethernet 2410/100/1000M Port 2 Gigabit SFP Port

Performance

Switching Capacity 52Gbps
Throughput 38.6Mpps
Packet Buffer 4.1M
MAC Address 8K
Jumbo Frame 10KB
Transfer Mode Store and forward
MTBF 100000 hours

Standard
Network Protocol

IEEE802.3 (10Base-T)
IEEE802.3u (100Base-TX)
IEEE802.3ab (1000Base-TX)
IEEE802.3z (1000Base-FX)
IEEE802.3x (Flow control)

PoE Protocol

IEEE802.3af (15.4W) IEEE802.3at (30W)

Industry Standard s

EMI: FCC Part 15 CISPR (EN55032) Class A
EMS: EN61000-4-2 (ESD), EN61000-4-4 (EFT)
Shock: IEC 60068-2-28
Free Fall: IEC 60068-2-32
Vibration: IEC 60068-2-6

Recommended Network Medium

10Base-T: Cat3,4,5 or above UTP(≤100M)
100Base-TX: Cat5 or above UTP(≤100M)
1000Base-TX: Cat5 or above UTP(≤100M)

Optical Media

Multimode Fiber: 50/125, 62.5/125, 100/140um
Single Mode Fiber: 8/125, 8.7/125, 9/125, 10/125um

Environmental

Operating Temperature: 14 to 122F (-10 to 50C), 10% to 90% non-condensing humidity
Storage Temperature: -40 to 158F (-40 to 70C), 5% to 90% non-condensing humidity

Mechanical

Dimensions 17.3” x 8” x 1.73” (440 x 205 x 44mm)
Weight 8.6 lbs (3.9kg)

Power Voltage

Input Voltage: AC100-240V, 50/60Hz
Power Supply: 52V, 7.69A (included)
Per Port Max PoE Power: 30W Total Power
Budget of unit: 378W
Includes Power Cord, Rack Mount Ears, 2pcs Copper Transceiver modules

Includes

PoE Watchdog – Resets port automatically when data is not being transmitted. Great for surveillance cameras.
Link Extension Mode – Provides up to 250 meters of long-distance power transmission at 10Mbps
Port Isolation Mode – Isolates each port except for the uplink ports to provide extra security and network performance

FAQ

Q: What is the maximum power budget for PoE devices connected to this switch?
- A: The total power budget of the unit is 378W, and each PoE port can provide a maximum power of 30W.
Q: Can I use this switch with both Cat5 and Cat6 Ethernet cables?
- A: Yes, this switch is compatible with Cat5, Cat5e, and Cat6 Ethernet cables.
Q: Does this switch support jumbo frames?
- A: Yes, the switch supports jumbo frames up to 10KB in size.

Products comply with NDAA Section 889 Part B Guidelines
Speco Technologies is constantly developing and improving products. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Spec Rev. 9/27/23

CONTACT