speco technologies HT5940TM Intense IR Dome Camera Wall/Ceiling Mount Instruction Manual
- June 3, 2024
- speco technologies
Table of Contents
speco technologies HT5940TM Intense IR Dome Camera Wall/Ceiling Mount
Instruction
HD-TVI 1080p 2MP Intense IR Dome Camera
Wall/Ceiling Mount, UTC, 2BNC out for TVI & CVBS, Dual voltage
HT5940TM – 2.8~12mm motorized zoom focus lens, dark gray housing
DIMENSIONS
FEATURES
- Full HD resolution over coax (HD-TVI)
- Supports up to Full HD 1080p @ 30fps
- True WDR operation
- Intense IR function – no saturation, IR intensity adapts to subject to provide vivid image
- Built-in heater and anti-fog glass reduces condensation
- 3-axis for wall and ceiling mounting
- Chameleon Cover™: snaps on and can be painted to match any décor!*
- Full OSD and Zoom / Focus control through on-board and UTC
- Additional 960H analog output
- Signal distance up to 1600 feet*
- Vandal / tamper resistant
- IP67 compliant, weather resistant
- 12VDC & 24VAC dual voltage operation
- 5 year warranty
SPECIFICATIONS
- Image Sensor: 1/2.9” Progressive Scan CMOS, 2MP
- Minimum Illumination: 0.00 lux (IR LED on)
- Effective Pixels: 1984 (H) x 1105 (V)
- Total Pixels: 2000 (H) x 1121 (V)
- Scanning System: Progressive
- S/N Ratio: More than 50dB
- Output Resolution: 1920×1080 @ 30fps
- Video Output: 1.0Vp-p / 75 Ohms
- Electronic Shutter: Auto / Manual (1/30 –1/30,000 sec.)
- Day / Night: Auto / Color / BW / External
- Test Monitor Output: CVBS (BNC out in Yellow)
- Communication : UTC (up the coax)
- Power: 12VDC / 24VAC
- Power Consumption: 800mA max. (DC), 650mA max. (AC)
- Operating Temperature: -4°F –122°F
- Unit Dimensions :3.97” (H) x 5.23” (Dia.)
- Unit Weight: 1.4 lbs(camera), 0.7 lbs(junction box)
- Certifications : FCC, RoHS
- Signal Distance: Up to 1600 feet (depending on coax quality)*
OSD MENU TREE
OSD CONTROL
OSD MENU Details
- IRIS : ‘ALC’ as a default value
- 2-MOTOR : AF Mode, Scanning, OnepushAF, Sync TDN, Initial
- EXPOSURE : adjusts exposure settings.
- BRIGHTNESS : Adjusts image brightness. (0~ 20)
- SHUTTER : Outdoor / Indoor / Deblur
- INTENSIFY : Sets the desired multiple of the digital exposure length. AGC(Auto Gain Control): Adjusts the AGC level. (0~10)
- BACKLIGHT : Adjusts backlight options.
- WDR : WDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark area
- Adjusts the WDR Weight (LOW/MIDDLE/HIGH)
- CVBS out cannot adjust this function.
- BLC : Produces a clearer image of an object darkened by strong backlighting.
- H-POS : Adjusts the horizontal position(0~20)
- V-POS : Adjusts the Vertical position(0~20)
- H-SIZE : Adjusts the horizontal block size (0~20)
- V-SIZE : Adjusts the vertical block size (0~20)
- HLC : Uses to contain extremely bright areas such as from car headlight, the light can be masked out much of the on-screen details.
- DAY / NIGHT : Adjust Day / Night options.
- COLOR : Always Color mode, Default value for these cameras
- B/W : Always B/W mode.
- ANTI-SAT. : Adjusts the Anti Saturation level (0~20)
- EXT : This mode allows you to apply a desired filter to external signals.
- ANTI-SAT. : Adjusts the Anti Saturation level (0~20)
- EXTERN S/W : Selected at manufacturer side
- D N LEVEL (0~20) : Selected at manufacturer side
- N D LEVEL (0~20) : Selected at manufacturer side
- DELAY : Adjusts the changing delay time (LOW/MIDDLE/HIGH)
- AUTO : this mode is not available for IR camera
- COLOR : Adjusts white balancing options.
- AWB : it goes to optimized color level automatically.
- COLOR GAIN : Sets the desired Color Gain value (0~20)
- SPECO DNR : Uses to reduce the background noise in a low luminance environment with 2D + 3D filtering system.
- IMAGE : Adjusts various image options.
- SHARPNESS: Adjusts sharpness level. Increasing this value, the picture outline becomes stronger and clear. (0~10)
- GAMMA : Sets the desired Gamma value. (0.45 ~ 0.75)
- MIRROR : Change the video direction horizontally.
- FLIP: Change the video direction perpendicularly.
- ACE (D-WDR) : Uses a digital wide dynamic range to balance dark and over saturated areas within the image.
- DEFOG : Activated this mode when the video or the weather is foggy.
- PRIVACY : Used to hide regions of the image.
- MOTION : Adjust motion detection settings.
- DET WINDOW
- DET TONE
- MDRECT FILL
- SENSITIVITY : Sets the desired of “Motion” (0~20) MOTION OSD
- TEXT ALARM
- SIGNAL OUT
- SYSTEM : Adjusts various camera system options.
- OUTPUT
- MAIN OUTPUT ANALOG OUT0
- ANALOG OUT0 TVI
- Y GAIN
- CB GAIN
- CR GAIN
- POSITION
- BURST FREQ
- BURST GAIN
- B&W
- UCC SELECT
- 720EX
- FRAME RATE: 1080P 30 / 720P 60
- FREQ 60Hz
- COM.
- IMAGE RANGE
- COLOR SPACE
- COLOR BAR : Manufacturer’s option
- LANGUAGE : Sets the desired OSD language
- CAM TITLE
- RESET: Press with long to reset all settings to factory defaults.
LIMITED WARRANTY
VIDEO PRODUCTS
THIS WARRANTY IS VALID ONLY ON PRODUCTS PURCHASED AND USED IN THE UNITED
STATES OF AMERICA AND CANADA. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL USER.
SUBJECT TO CONDITIiONS AND EXCLUSIONS FOUND BELOW, THIs PRODUCT IS WARRANTED
AGAINST MANUFACTURING DEFECTS IN MATERIAL AND WORKMANSHIP FOR THE FOLLOVWING
PERIOD FOR PARTS AND LABOR:
GES WILL REPAIR OR REPLACE (AT OUR DISCRETION)
ANY PARTS FOUND TO BE DEFECTIVE FOR THE WARRANTY PERIOD SPECIFIED. WE WILL
PROVIDE A REPLACEMENT FOR ANY DEFECTIVE PART.
CONDITIONS
- YOU MUST OBTAIN A RETURN AUTHORIZATION (RA) NUMBER FOR ANY MERCHANDISE BEING RETURNED TO SPECO TECHNOLOGIES, WHETHER FOR RETURN/EXCHANGE OR REPAIR, WHETHER IN OR OUT OF WARRANTY.
- THIS WARRANTY WILL BE HONORED ONLY UPON PRESENTATION OF THE ORIGINAL DATED BILL OF SALE OR SALES SLIP
- TRANSPORTATION OF THE PRODUCT TO OUR SERVICE DEPARTMENT IS THE RESPONSIBILITY OF THE USER. REPAIRED OR REPLACED PRODUCT WILL BE RETURNED PREPAID DURING THE WARRANTY PERIOD.
- SPECO TECHNOLOGIES DOES NOT AUTHORIZE ANY INTERNET OR MAIL ORDER PRODUCT SALES. IFA SPECO TECHNOLOGIES PRODUCT IS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR OR OTHER SOURCE, INCLUDING RETAILERS, MAIL ORDER SELLERS AND ONLINE SELLERS, IT WILL NOT BE HONORED OR SERVICED UNDER THE EXISTING SPECO TECHNOLOGIES WARRANTY POLICY. ANY SPECO TECHNOLOGIES PRODUCT PURCHASED FROM THESE ONLINE MERCHANTS WILLVOID THE APPLICABLE WARRANTY AND IS INELIGIBLE FOR TECHNICAL SUPPORT. IF YOU HAVE QUESTIONS ABOUT A RESELLER. PLEASE CONTACT SPECO TECHNOLOGIES AT 1-800-645-5516 FORALIST OF UNAUTHORIZED DEALERS, VIsIT: www.specotech.com/unauthorized.
EXCLUSIONS
- THIS WARRANTY SHALL NOT COVER ADJUSTMENT OF CuSTOMER OPERATED CONTROLS AS EXPLAINED IN THE APPROPRIATE MODEL’S INSTRUCTION MANUAL OR PRODUCTS WHICH HAVE BEEN ALTERED, ABUSED, OR HAVE MISSING ORALTERED SERIAL NUMBERS.
- THIS WARRANTY SHALL NOT APPLY TO UNCRATING, SETUP, INSTALLATION, OR THE REMOVAL AND REINSTALLATION OF PRODUCTS AFTER REPAIR.
- THIS WARRANTY SHALL NOT APPLY TO REPAIRS OR REPLACEMENTS NECESSITATED BY ANY CAUSE BEYOND THE RESULT OF MANUFACTURE INCLUDING, BUT NOT LIMITED TO, ANY MALFUNCTION, DEFECTS OR FAILURE CAUSED BY OR RESULTING FROM UNAUTHORIZED SERVICE OR PARTS. IMPROPER MAINTENANCE, MODIFICATION OR REPAIR BY THE USER. ABUSE. MISUSE. NEGLECT, ACCIDENT, FIRE, FLoOD, OR OTHER ACTS OF NATURE, INCORRECT LINE VOLTAGE, DAMAGE OR IMAGE BURNS TO TELEVIsION PICTURE TUBES CAUSED BY OR ATTRIBUTABLE TO THE USE OF ANY ACCESSORY, ELECTRONICS GAME OR DEVICE, OR DAMAGE CAUSED TO IMAGE PICKUP DEVICES BY EXCESSIVE LIGHT. THE FOREGOING IS IN LIEU OF ALL OTHER EXPRESSED WARRANTIES AND WE DO NOTAUTHORIZE ANY PARTY TO ASSUME FOR US ANY OTHER OBLIGATION OR LIABILITY. IN NO EVENT SHALL WE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE USE OF THIS PRODUCT DUE TO CAUSES BEYOND OUR CONTROL. SOME STATES DO NOTALLOW LIMITATIONS OF HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOTALLOW THE EXCLUsION OR LIMITATION OF cONSEQUENTIAL DAMAGES. THE ABOVE LIMITATIONS ON IMPLIED WARRANTY AND CONSEQUENTIAL DAMAGES MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
NOTE: FOR YOUR PROTECTION IN THE EVENT OF THEFT OR LOSS OF THIS PRODUCT, PLEASE FILL IN THE INFORMATION REQUESTED BELOW AND RETAIN WITH YOUR SALES RECEIPT.
ALWAYS USE DISCRETION WHEN INSTALLING VIDEO AND/OR AUDIO SURVEILLANCE
EQUIPMENT ESPECIALLY WHEN THERE IS AN EXPECTATION OF PRIVACY. INQUIRE
REGARDING FEDERAL, STATE AND/OR LOCAL REGULATIONS APPLICABLE TO THE LAWFUL
INSTALLATION OF VIDEO AND/OR AUDIO RECORDING OR SURVEILLANCE EQUIPMENT. PARTY
CONSENT MAY BE REQUIRED.
Speco Technologies is constantly developing product improvements. We reserve
the right to modify product design and specifications without notice and
without incurring any obligation. Rev. 220415
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>