speco technologies HTINT59K1 1000TVL Intensifier Series Dome Camera Owner’s Manual

speco technologies HTINT59K1 1000TVL Intensifier Series Dome Camera

DIMENSIONS

FEATURES

• 1/3” 1.3MP Sensor
• 1000 TV lines highest resolution in analog
• True WDR operation
• Superior low-light performance
• Amplify existing light with no distance limitation
• Presets: Outdoor, Low Light, Hallway, Lobby, Elevator, Indoor
• Built-in heater and anti-fog glass reduces condensation
• 3-axis for wall and ceiling mounting
• Chameleon Cover™: snaps on and can be painted to match any décor!*
• Full OSD operation through on-board control
• Signal distance up to 1600 feet*
• Vandal / tamper resistant
• IP67 compliant, weather resistant
• 12VDC & 24VAC dual voltage operation
• 5 year warranty

SPECIFICATIONS

• Image Sensor ……………… 1/3” 1.3MP Sensor
• Minimum Illumination. …… 0.0001 lux (Sens-up X32)
• Effective Pixels ……………. 1305 (H) x 1049 (V)
• Total Pixels …………………. 1312 (H) x 1069 (V)
• Scanning System. ……….. Progressive
• S/N Ratio. …………………… More than 50dB
• Video Output. ………………. 1.0Vp-p / 75 Ohms
• Electronic Shutter ………… Auto / Manual (1/60 –1/60,000 sec.)
• WDR ………………………….. On (Low / Middle / High) / Off
• Day / Night ………………….. Auto / Color / BW
• Test Monitor Output ……… CVBS (Connector on Board)
• Power ……………………….. 12VDC / 24VAC
• Power Consumption …….. 600mA max. (DC), 450mA max. (AC)
• Operating Temperature. … -4°F –140°F
• Unit Dimensions ………….. 3.97” (H) x 5.23” (Dia.)
• Unit Weight. ………………… 1.4 lbs(camera), 0.7 lbs(junction box)
• Certifications ……………….. FCC, RoHS

OSD MENU TREE
PRESET MODE

• OUTDOOR
• INDOOR
• LOW LIGHT
• LOBBY
• HALLWAY
• ELEVATOR

MAIN SETUP

OSD CONTROL

OSD MENU Details

IRIS : ‘ALC’ as a default value
EXPOSURE : adjusts exposure settings.

• BRIGHTNESS : Adjusts image brightness. (0~ 20)
• SHUTTER : Outdoor / Indoor / Deblur
• INTENSIFY : Sets the desired multiple of the digital exposure length.
• AGC(Auto Gain Control): Adjusts the AGC level. (0~10)

BACKLIGHT : Adjusts backlight options.

WDR : WDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark area

• Adjusts the WDR Weight (LOW/MIDDLE/HIGH)

BLC : Produces a clearer image of an object darkened by strong backlighting.

• H-POS : Adjusts the horizontal position(0~20)
• V-POS : Adjusts the Vertical position(0~20)
• H-SIZE : Adjusts the horizontal block size (0~20)
• V-SIZE : Adjusts the vertical block size (0~20)

HLC : Uses to contain extremely bright areas such as from car headlight, the light can be masked out much of the on-screen details.

DAY / NIGHT : Adjust Day / Night options.

• COLOR : Always Color mode, Default value for these cameras B/W : Always B/W mode.
  • ANTI-SAT. : Adjusts the Anti Saturation level (0~20)
• AUTO : Day / Night is switching automatically by AGC level.
  • ANTI-SAT. : Adjusts the Anti Saturation level (0~20)
  • AGC THRES : Adjusts AGC THRES (0~20)
  • AGC MARGIN : Adjusts AGC margin (0~20)
  • DELAY : Adjusts the changing delay time (LOW/MIDDLE/HIGH)

COLOR : Adjusts white balancing options.

• AWB : it goes to optimized color level automatically.
• COLOR GAIN : Sets the desired Color Gain value (0~20)

SPECO DNR : Uses to reduce the background noise in a low luminance environment with 2D + 3D filtering system.

IMAGE : Adjusts various image options.

• SHARPNESS : Adjusts sharpness level. Increasing this value, the picture outline becomes stronger and clear. (0~10)
• GAMMA : Sets the desired Gamma value. (0.45 ~ 0.75)
• MIRROR : Change the video direction horizontally.
• FLIP: Change the video direction perpendicularly.
• D-ZOOM : Digital zoom up to x8 will be activated.
• ACE (D-WDR) : Uses a digital wide dynamic range to balance dark and over saturated areas within the image.
• DEFOG : Activated this mode when the video or the weather is foggy. SHADING : Sets the Lens Shading Compensation value. (ON/OFF)
• PRIVACY : Used to hide regions of the image.

MOTION : Adjust motion detection settings.

• DET WINDOW
• DET TONE
• MDRECT FILL
• SENSITIVITY : Sets the desired of “Motion” (0~20) MOTION OSD
• TEXT ALARM
• SIGNAL OUT

SYSTEM : Adjusts various camera system options.
COM.

• CAM ID : Sets the camera ID for the RS-485 (0~255)

• BAUD RATE : Sets the baud rate for the RS-485 (2400~115200). OUTPUT
  VIEW ANGLE

• WIDE 4 : 3 / WIDE 16 : 9
  FREQ 60HZ
  ANALOG MODE CVBS
  CONFIRM YES

IMAGE RANGE
COLOR SPACE
COLOR BAR : Manufacturer’s option
LANGUAGE : Sets the desired OSD language
CAM TITLE
RESET: Press with long to reset all settings to factory defaults.

CONDITIONS

1. YOU MUST OBTAINA RETURN AUTHORIZATION (RA) NUMBER FOR ANY MERCHANDISE BEING RETURNED TO SPECO TECHNOLOGIES, WHETHER FOR RETURN/EXCHANGE OR REPAIR, WHETHER IN OR OUT OF WARRANTY.
2. THIS WARRANTY WILL BE HONORED ONLY UPON PRESENTATION OF THE ORIGINAL DATED BILL OF SALE OR SALES SLIP.
3. TRANSPORTATION OF THE PRODUCT TO OUR SERVICE DEPARTMENT IS THE RESPONSIBILITY OF THE USER. REPAIRED OR REPLACED PRODUCT WILL BE RETURNED PREPAID DURING THE WARRANTY PERIOD.
4. SPECO TECHNOLoGIES DOES NOT AUTHORIZE ANY INTERNET OR MAIL ORDER PRODUCT SALES. IF A SPECO TECHNOLOGIES PRODUCT IS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR OR OTHER SOURCE, INCLUDING RETAILERS, MAIL ORDER SELLERS AND ONLINE SELLERS, IT WILL NOT BE HONORED OR SERVICED UNDER THE EXISTING SPEcO TECHNOLOGIES WARRANTY POLICY. ANY SPEcO
   TECHNOLOGIES PRODUCT PURCHASED FROM THESE ONLINE MERCHANTS WILL VoID THE APPLICABLE WARRANTY AND IS INELIGIBLE FOR TECHNICAL SUPPORT. IF YOU HAVE QUESTIONS ABOUT A RESELLER, PLEASE CONTACT SPECO TECHNOLOGIES AT 1-800-645-5516
   FORALIST OF UNAUTHORIZED DEALERS, VISIT:. www.specotech.com/unauthorized.

EXCLUSIONS

1. THIS WARRANTY SHALL NOT COVER ADJUSTMENT OF cUSTOMER OPERATED CONTROLS AS EXPLAINED IN THE APPROPRIATE MODEL’S INSTRUCTION MANUAL OR PRODUCTS WHICH HAVE BEEN ALTERED, ABUSED, OR HAVE MISSING ORALTERED SERIAL NUMBERS.
2. THIS WARRANTY SHALL NOT APPLY TO UNCRATING, SETUP, INSTALLATION, OR THE REMOVAL AND REINSTALLATION OF PRODUCTS AFTER REPAIR.
3. THIS WARRANTY SHALL NOT APPLY TO REPAIRS OR REPLACEMENTS NECESSITATED BY ANY CAUSE BEYOND THE RESULT OF MANUFACTURE INCLUDING, BUT NOT LIMITED TO, ANY MALFUNCTION, DEFECTS OR FAILURE CAUSED BY OR RESULTING FROM UNAUTHORIZED SERVICE OR PARIS, IMPROPER MAINIENANCE, MODIFICAlON OR REPAIR BY IHE USER, ABUSE, MISUSE, NEGLECl, ACCIDENT, FIRE, FLOOD, OR OTHER ACTS OF NATURE, INCORRECT LINE VOLTAGE, DAMAGE OR IMAGE BURNS TO TELEVISION PICTURE TUBES CAUSED BY ORATTRIBUTABLE TO THE USE OF ANY ACCESSORY, ELECTRONICS GAME OR DEVICE, OR DAMAGECAUSED TO IMAGE PICKUP DEVICES BY EXCESSIVE LIGHT.
   THE FOREGOING IS IN LIEU OF ALL OTHER EXPRESSED WARRANTIES AND WE DO NOT AUTHORIZE ANY PARTY TO ASSUME FOR US ANY OTHER OBLIGATION OR LIABILITY. IN NO EVENT SHALL WE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM
   THE USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE USE OF THIS PRODUCT DUE TO CAUSES BEYOND OUR CONTROL. SOME STATES
   DO NOTALLOW LIMITATIONS OF HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOTALLON THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES. THE ABOVE LIMITATIONS ON IMPLIED WARRANTY AND CONSEQUENTIAL DAMAGES MAY NOTAPPLY TO YOU.
   THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
   NOTE: FOR YOUR PROTECTION IN THE EVENT OF THEFT OR Loss OF THIS PRODUCT, PLEASE FILL IN THE INFORMATION REQUESTED BELOW AND RETAIN WITH YOUR SALES RECEIPT.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>