speco technologies P24S26G2 26 Port Gigabit Switch User Manual

speco technologies P24S26G2 26 Port Gigabit Switch

Specifications

• Model: P24S26G2
• Type: 26-Port Gigabit Switch with 24 PoE Ports and 2 SFP Uplink

Product Information

The P24S26G2 is a Gigabit PoE Unmanaged Switch designed for efficient data transmission and power over Ethernet functionality. It features 24 PoE ports and 2 SFP uplink ports, providing high-speed connectivity for various devices.

Product Usage Instructions

Indicator Lights
The indicator lights on the switch provide information about the device’s status:

• 1000M Optical Port: Green light indicates link/act, yellow light indicates speed.
• 10/100/1000M Ethernet Port: Green light indicates link/act, yellow light indicates speed.

PoE Powered Function
The switch supports PoE powered functions, allowing for power and data transmission over a single Ethernet cable. It complies with standard PoE power supply protocols.

States of DIP Switch
The DIP switches on the switch serve various functions:

1. PoE Watchdog: Automatically detects and restarts port POE when communication fails.
2. Link Extension: Extends PoE power supply and data transmission distance to 250 meters.
3. Port Isolation: Enables monitoring traffic levels and communication restrictions between ports.
4. Storm Control: Drops packets when specified traffic levels are exceeded.

Installation Precautions
Before installing the switch, ensure to follow these precautions:

• Avoid direct exposure to the optical port’s laser beam.
• Install power cord only when the power is off to prevent personal injury.
• Ensure ESD protection during installation and maintenance.

Switch Installation
The switch supports various installation methods including desktop, wall- mounted, and rack-mounted. Follow these steps for rack mount installation:

1. Install floating screws on the front hole bar of the cabinet on each side.
2. Load the equipment into the cabinet.
3. Secure the equipment with M6 screws to the cabinet/rack.
4. Install an earth wire for grounding.

FAQ

• How can I extend the PoE power supply distance?
  To extend the PoE power supply distance, use the Link Extension function on the DIP switch which allows for transmission up to 250 meters at a reduced speed of 10M.

• What should I do if the indicator lights show abnormal behavior?
  If the indicator lights display abnormal behavior, ensure that the connections are secure and properly configured. If issues persist, contact Speco Technologies technical support for assistance.

Description

• The products described in this manual, incduding but not limited to the illustrated products, please refer to the actual product purchased.If any changes on product appearance, please refer to the official product information.
• PoE switch and ethernet switch installation methods are the same, the actual use environment and method that depends on the specific product requirement.

Packing List

• Switch(Specific model See the product label for more details).
• Power Cable(The default is pluggable or a power cable with built-in power module).
• Brackets, Screw(Rack type standard).
• User manual,Certification.

Installation Precautions

• Do not install the equipment in the environment of seepage, drip or condensation easily,otherwise the equipment might burn out.
• Please ensure the environment where the equipment is installed is well ventilated, and forbidden to block the cooling holes.
• Do not install the equipment in a high density dust environment.
• If rack switches are in a natural heat dissipation environment, please ensure the separation distance exceeds 1U.
• Do not aerial cabling outdoor, otherwise the equipment is prone to lightning strike. Using temperature and humidity depend on the descriptions of the specific product.

Safety Precautions

• Do not look directly at the optical port to prevent the laser beam from burning your eyes.
• Do not install the power cord with power on to avoid personal injury.
• Do not supply power before equipment installation and wiring.
• ESD protection is necessary during the installation and maintenance of equipment. Do not place objects on the device.

Switch Installation

Switches support a variety of installation methods, desktop, wall mounted, rack mount, please install according to the actual environmental requirements.

Mounting Ear Installation

Rack Mount Installation

1. Install 4 floating screws on the front hole bar of the cabinet on each side.
2. Load the equipment into the cabinet.
3. Use M6 screws to secure the equipment with the cabinet/rack.
4. Install earth wire to earth connection point.

Connecting Equipment

Network Cable

• 10Base-T: Cat3, 4, 5 or above UTP(≤250m).
• 100Base-TX: Cat5 or above UTP(≤150m) .
• 1000Base-TX: Cat5 or above UTP(≤100m).

Grounding
Ensure that the grounding screw of the equipment is effectively grounded to protect the safety of the equipment.

Optical Fiber

1. Optical fibers must be used with the optical module.
2. Fiber bending radius must not be less than 40mm.

Power Cable

1. Distance between power cable and network cable should be more than 10cm.
2. The AC power please use the local AC power cable.

Technical Spec

I/O Interface

Power| Input AC 100-240V, 50/60Hz

Fixed Port

| 24×10/100/1000M PoE Ports 2x1000M SFP Uplink ports
Performance
Switching Capacity| 52Gbps
Throughput| 38.6Mpps
Packet Buffer| 4.1Mb
MAC Address| 8K
Jumbo Frame| 10Kbytes
Transfer Mode| Store and forward
MTBF| 100,000 hours
Mechanical

Structure Size

| Product Dimension (LxWxH): 440x280x44mm Package Dimension (LxWxH): 525x395x95mm N.W: 1.8kg

G.W: 4.5kg

Packing Info

| Carton MEAS: 540x495x410mm Packing Qty: 5 pieces

Packing Weight: 25.7kg

Indicator Definition

PWR

| Off| No power| No power input
On| Power on| The device operates normally

1000M optical port

|

Green Light Link/act

| on| Port connected
off| Port not connected
Flash| Port connected, and Data sending or receiving
Yellow Light Speed| on| 1000M connected
off| 10/100M connected

10/100/1000M

Ethernet port

|

Green Light Link/act

| on| Port connected
off| Port not connected
Flash| Port connected, and Data sending

or receiving

Yellow Light Speed| on| 1000M connected
off| 10/100M connected

PoE Powered Function

This function is applicable to PoE switches,not applicable to non-PoE switches.

Standard PoE Power Supply

1. Standard PoE power supply includes: protocol detection, power pin sequence Detection, power output, abnormal protection, link abnormal monitoring
2. The PoE power supply protocol includes: IEEE802.3af(15.4W), IEEE802.3at(30W)
3. The standard PoE power pin sequence is 12+/36-,and the passive PoE power pin sequence is 45+/78-
4. The standard POE switches can automatically detect and supply power to the PDs that meet the standard,non-POE devices are not powered and only transmit data
5. PoE Watchdog
   When the switch port communication fails, the corresponding port POE will automatically detect and restart, restore network communication by itself, and reduce manual intervention and maintenance.

States of DIP Switch

1

|

PoE Watchdog

| When the switch port communication fails, the corresponding port POE will automatically detect and restart, restore network communication by itself.

2

|

Link Extension

| 1-24 ports PoE power supply and data transmission distance can be extended to 250 meters, the transmission rate becomes 10M

3

|

Port Isolation

|

PoE ports (1-24) of the switch cannot communicate with each other, and can only communicate with uplink ports

4

|

Storm Control

| Enables the switch to monitor traffic levels and to drop broadcast, multicast, and unknown unicast packets when a specified traffic level is exceeded.

Please contact Speco Technologies technical support @ 1-800-645-5516 if you have any questions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>