AUSnew Homecare G6 Excel Bariatric Wheelchair Instruction Manual
- June 5, 2024
- AUSnew Homecare
Table of Contents
RM160-56
RM160-61
G6 Excel Bariatric Wheelchair 
Warranty
All products carry a 12-month warranty from the date of purchase against
manufacturing defects.
Misuse or damage is not covered.
This warranty does not affect your statutory rights.
Assembly / Adjustment
Congratulations on the purchase of your new G6 Excel Wheelchair. Equipped with
several features and accessory choices you are sure to enjoy the benefits of
this chair.
Please follow these simple steps to assemble your wheelchair –
- With the chair upright, push down on the sides of the seat until it clamps into position.
- Height adjustable canes can be adjusted for the individual career by loosening the screws at the base of the cane, adjusting, and retightening.
- Fit legrests (both left and right) into the fitting from an outward angle and turning inward until it locks into position. Footplate height can be adjusted using the Allen key provided. Loosen the footplate and select the desired height, retighten to secure. Elevating legrest are available for this chair and fit into place the same way as the standard legrests. To adjust loosen the screw, select the desired angle and retighten.
- G6 Self Propel Wheelchairs have a quick-release 24” wheel. To release push the center button on the axle and pull out. To reinstate locate the axle back into the bracket on the frame. Ensure it is fully engaged before using the chair.
- Armrests flip back and are removable. To release the armrest push the clip at the front and flip back, to re-instate the clip back into the front bracket and ensure it locks into place. To remove the armrest push the clip at the front and pull the lever at the rear then lift the armrest out. Again ensure clipped back in securely when replacing.
- Care-assist hand brake provides added security for the person pushing the chair. When the wheelchair is stationary, the hand brake at the wheel should be applied for added security. To apply the wheel brake push forward, to release pull back.
- Anti-tip wheels can also be fitted to this chair, they provide safety when the user is ascending ramps and steep inclines, preventing the wheelchair from tipping backward. If not required they can be adjusted up.
- To fold your Wheelchair, ensure both wheel brakes are locked. Flip the footplates up and remove them. Lift the seat in the middle (holding front and back) and pull up. The chair sides will come together. At this time you can also remove the large Self Propel wheel if required to make the chair lighter and more compact for stowing.
Maximum User Weight
| Product Code | Description | Weight Limit |
|---|---|---|
| RM160-56 | G6 Wheelchair Self Propel 56cm seat | 250kg |
| RM160-56D | G6 Wheelchair S/P 56cm seat with Drum Brake | 250kg |
| RM160-61 | G6 Wheelchair Self Propel 61cm seat | 250kg |
| RM160-61D | G6 Wheelchair S/P 61cm seat with Drum Brake | 250kg |
Care & Maintenance
All of the product components are manufactured from high-quality materials.
However, it is very important that you carry out regular checks: all nuts,
bolts, knobs, and handles should remain secure.
Wheels should move freely and brakes engage when applied. To ensure the best
from your rollator it should be kept well maintained.
In the event of identifying any irregularities, you should contact your
local distributor for advice.
NB: Your wheelchair should only be used for its intended purpose.
Documents / Resources
|
AUSnew Homecare G6 Excel Bariatric
Wheelchair
[pdf] Instruction Manual
G6 Excel Bariatric Wheelchair, G6, Excel Bariatric Wheelchair, RM160-56,
RM160-61
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>