qtx Dazzler 80W LED RGBWA Moving Head User Manual

June 13, 2024
qtx

qtx Dazzler 80W LED RGBWA Moving Head

qtx-Dazzler-80W-LED-RGBWA-Moving-Head-product-img

Product Information

The Dazzler is an 80W LED RGBWA Moving Head unit designed to create bright and colorful washes. It features a compact design and is equipped with a powerful 80W 5-color COB LED. The unit can be operated using internal auto or sound-to- light programs or by connecting it to a DMX controller using the 11/14 channel DMX connection for more precise control. It can be used as a free-standing unit or mounted to trussing using the supplied brackets. The Dazzler is ideal for small stages, bars, nightclubs, and mobile DJs.

Introductions

  • Please read through this manual thoroughly before use, any damage caused by misuse of the product will not be covered by warranty.
  • Dazzle your venue with bright and colorful washes using this compact moving head unit comprising a powerful 80W 5-color COB LED.
  • Easily operated using internal auto or sound-to-light programs or by 11/14 channel DMX connection for more precise control, the unit can be free-standing or mounted to trussing using the supplied brackets and is ideal for small stages, bars, nightclubs, and mobile DJs.

In the box

  • Your Dazzler should arrive with you in a single carton in good condition.
  • The carton should contain 1 x main unit with bracket, 1 x UK IEC mains lead, and 1 x manual.

Warning

  • To prevent the risk of fire or electric shock, do not expose the unit to rain or damp environments.
  • In the event of a spillage, disconnect the mains and allow the unit to dry out naturally.
  • Qualified personnel should then check the unit before continuing use.
  • Please read through this manual thoroughly before use, any damage caused by misuse of the product will not be covered by warranty.
  • Please do not open the cover, contains high voltage. This product is not serviceable or repairable by the end user. Please refer to qualified personnel for service and repair.

Placement

  • Use the included mounting bracket to fix to a stand or lighting truss.
  • Use secondary safety fixings if mounting overhead.
  • Keep away from damp or dusty environments.
  • Ensure adequate airflow around the fixture housings.
  • Ensure adequate access to controls and connections.
  • Do not aim LED output directly into line of sight, as this can result in eye injury.

Cleaning

  • Use a soft cloth with a neutral detergent to clean the casing as required.
  • Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
  • Do not use strong solvents for cleaning the unit.

Rear panel and control

qtx-Dazzler-80W-LED-RGBWA-Moving-Head-fig-1

  1. Menu button
  2. Up button
  3. Down button
  4. LED display
  5. Enter button
  6. Microphone
  7. DMX input
  8. DMX output
  9. IEC input (110-240 Vac, 50/60 Hz)

Manual control menu

  • Press the “MENU” button to enter the settings menu.
  • Press the “UP” and “DOWN” buttons to navigate through various setting functions.
  • Press the “ENTER” button to confirm the desired setting:
Menu Function Description
Addr A001-A512 DMX address settings
Chnd 11CH-14CH DMX channel select
Line 0-100 Concurrent sessions
Slnd MAST-SL1-SL2-Addr Work mode selection
Shnd Sh1-Sh4 Sound active modes (Sh4 is 180° forward only DJ mode)
Aut0 Aut0 – Aut4 Auto effect selection (Aut4 is 180° forward only DJ mode)
SP00 – SP99 Auto affect speed – slow to fast
SoUn on-off Sound on/off
SenS 0-100 Sound active mode sensitivity – low to high
LeD on-off LED display on/off
dISP dSIP LED display reverse mode
Pan no-yes Pan reversal
tiLt no-yes Tilt reversal
test Auto test mode
hour 0-9999 Unit run time
ver v10 Current firmware version
rset Reset to factory settings

DMX mode: The Dazzler can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct start address by using the “UP” and “DOWN” buttons and “ENTER”. The A on the LED display will begin to flash once it’s received the DMX signal from the controller. This unit has either 11 or 14 DMX channels as indicated in the table below:

11CH

mode

| 14CH

mode

| Function| DMX value and description
---|---|---|---
1| 1| PAN| 0-255 PAN adjust 0-540°
| 2| PAN fine| 0-255
2| 3| TILT| 0-255 TILT adjust 0-540°
| 4| TILT fine| 0-255
3| 5| PAN & TILT speed| 0-255 Speed adjust fast to slow
4| 6| Dimmer| 0-255 Dimmer 0-100%
5| 7| Strobe| 0-007 No function, 008-015 Open, 016-131 Strobe slow to fast, 132-139 Open, 140-181 Slowly open quickly close, 182-189 Open, Quickly open slowly close, 232-239 Open,

240-247 Random strobe, 248-255 Open

6| 8| Red wash| 0-255 (0-100%)
7| 9| Greenwash| 0-255 (0-100%)
8| 10| Blue wash| 0-255 (0-100%)
9| 11| Whitewash| 0-255 (0-100%)
10| 12| Amber wash| 0-255 (0-100%)
| 13| Colour macro| See below table
11| 14| Special| 0-009 No function, 010-059 Auto mode 1, 060-109 Auto

mode 2, 110-159 Auto mode 3, 160-209 Auto mode 4,

210-239 Reset, 240-255 Sound active mode

Color Macro 000-007, Blackout

008-015, R
016-023, G
| 024-031, B
---|---
032-039, W
040-047, A

Color Macro (contd)

| 048-055, R+G
---|---
056-063, R+B
064-071, R+W
072-079, R+A
080-087, G+B
088-095, G+W
096-103, G+A
104-111, B+W
112-119, B+A
120-127, W+A
128-135, R+G+B
136-143, R+G+W
144-151, R+G+A
| 152-159, R+B+W
---|---
160-167, R+B+A
168-175, R+W+A
176-183, G+B+W
184-191, G+B+A
192-199, G+W+A
200-207, B+W+A
208-215, R+G+B+W
216-223, R+G+B+A
224-231, R+G+W+A
232-239, R+B+W+A
240-247, G+B+W+A
248-255, R+G+B+W+A

Specifications

Power supply 110-240Vac, 50/60Hz (IEC)
Power consumption 100W
Fuse rating F3A
LED power 80W RGBWA COB LED
Modes Auto, sound, master/slave, DMX512
DMX channels 11, 14CH
PAN range 540°
Tilt range 270°
Beam angle 36°
Dimensions 245 x 205 x 140mm
Weight 2.35kg

Troubleshooting

No power (mains) Check mains voltage is correct and outlet is switched on

Check IEC lead and fuse (if the fuse continually blows, refer to your dealer)
No light output| Check control panel mode settings
Check DMX settings from the controller (dimmer levels, blackout, etc.)




Unresponsive to DMX

| Check that the unit is in DMX mode and ensure the A on the DMX address flashes to confirm it’s receiving a DMX signal
Check DMX controller is not set to black out
Check DMX controller is on the correct fixture/page
Check the master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/Cutting out| Ensure adequate ventilation and the unit is not too close to a heat source

This product is classed as Electrical or Electronic equipment and should not be disposed of with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

  • Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park,
  • Taylor Road, Trafford Park, Manchester. M41 7JQ.
  • AVSL (Europe) Ltd, Unit 3D North Point House,
  • North Point Bus. Park, New Mallow Road, Cork, Ireland.
  • www.avsl.com.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals