TECKNET TK-HS005 Wireless Bluetooth Trucker Headset with Microphone User Manual

June 14, 2024
TECKNET

TECKNET TK-HS005 Wireless Bluetooth Trucker Headset with Microphone

TECKNET-TK-HS005-Wireless-Bluetooth-Trucker-Headset-with-Microphone-
PRODUCT

Product Usage Instructions

Pairing Methods

BT Pairing

  1. Turn on the Bluetooth on your phone.
  2. Press and hold the MFB for 2 seconds to power on the headset. You will hear “Power on”.
  3. Search and tap to connect to TK-HS005 on the Bluetooth list of your phone. Then you will hear “Paired”. Your headset is connected. The LED indicator will flash blue every 10 seconds after paired. The phone shows that TK-HS005 is connected.

Note: The headset can also be connected to a computer by following the above steps.

Dongle Connection

  1. Plug the dongle into the USB port of your computer.
  2. Power on the headset and it will pair with your computer automatically.

Switching to Unilateral Headset

  1. Press and hold the Release Button and pull out the Detachable Earpiece.
  2. Snap the Detachable Head Clamp into the slot to use the headset as a unilateral one.

To Pair with Two Phones

  1. Follow the above pairing guide to connect the headset to phone A, then switch off the Bluetooth function of phone A.
  2. At this point, the headset automatically enters pairing mode.
  3. Search and click to connect to TK-HS005 on the Bluetooth list of phone B.
  4. After the headset is paired with phone B, switch on the Bluetooth function of phone A and tap TK-HS005 to reconnect to the headset. Now the headset is connected with two phones.

Note: When the headset is paired with two phones, music can only be played from one. If you want to play music on the other connected phone, pause or stop playing the music on the previous one. If you want to answer a new call from the other connected phone, hang up the current call on the previous one.

Operations Instructions

MFB/Mute Button

Function Operation Instructions
Power on Press and hold the MFB for 2 seconds.
Power off Press and hold the MFB for 3 seconds.
Voice assistant Press and hold the MFB for 1 second to activate the voice

assistant on your phone.
Audio switching| During a call, press and hold the MFB for 2 seconds to switch
between the headset and phone speaker.
Mute/Unmute the Mic| Short press the MFB to mute or unmute the Microphone.
Clear pair record| Press and hold the MFB and connect the charging cable to charge
the headset. This operation resets and reboots the headset.

Congratulations

Thank you for purchasing TECKNET Wireless Headset. Please read this User Manual thoroughly before use of the product and retain it for future reference. If you have any problem using this Wireless Headset, please contact us by email at [email protected].

Package Contents

TECKNET-TK-HS005-Wireless-Bluetooth-Trucker-Headset-with-Microphone-
FIG-1

Product Overview

TECKNET-TK-HS005-Wireless-Bluetooth-Trucker-Headset-with-Microphone-
FIG-2

TECKNET-TK-HS005-Wireless-Bluetooth-Trucker-Headset-with-Microphone-
FIG-3

  1. Headband
  2. Release Button
  3. Detachable Earpiece
  4. Volume +
  5. Phone Button/Play or Pause
  6. Volume –
  7. Microphone
  8. LED Indicator Light
  9. MFB/Mute Button
  10. USB-C Charging Port
  11. Detachable Head Clamp

Specifications

  1. Wireless Connection: BT
  2. BT Version: V5.0
  3. Wireless Frequency Band: 2.4 GHz
  4. Supported Protocols: HSP, HFP, A2DP, AVRCP
  5. Operation Range: 10 meters
  6. Charging Time: approx. 2 hrs
  7. Input: DC 5V 0.5A
  8. Battery Voltage: 3.7V
  9. Transmission Power: 3 dBm

Pairing Methods

BT Pairing

  1. Turn on the Bluetooth on your phone.
  2. Press and hold the MFB for 2 seconds to power on the headset. You will hear “Power on”.
  3. Search and tap to connect to “TK-HS005” on the Bluetooth list of your phone. Then you will hear “Paired. Your headset is connected.” The LED indicator will flash blue every 10 seconds after paired. The phone shows that “TK-HS005” is connected.

Note: The headset can also be connected to a computer by following the above steps.

Dongle Connection

  1. Plug the dongle into the USB port of your computer.
  2. Power on the headset and it will pair with your computer automatically.

Switching to Unilateral Headset

  1. Press and hold the Release Button and pull out the Detachable Earpiece.
  2. Snap the Detachable Head Clamp into the slot to use the headset as a unilateral one.

To Pair with Two Phones

  1. Follow the above pairing guide to connect the headset to phone A, then switch off the Bluetooth function of phone A.
  2. At this point, the headset automatically enters pairing mode.
  3. Search and click to connect to “TK-HS005” on the Bluetooth list of phone B.
  4. After the headset is paired with phone B, switch on the Bluetooth function of phone A and tap “TK-HS005” to reconnect to the headset. Now the headset is connected with two phones.

Note: When the headset is paired with two phones, music can only be played from one. If you want to play music on the other connected phone, pause or stop playing the music on the previous one. If you want to answer a new call from the other connected phone, hang up the current call on the previous one.

Operations Instructions

Button Function Operation Instructions

MFB/Mute Button

| Power on| Press and hold the MFB for 2 seconds.
Power off| Press and hold the MFB for 3 seconds.
Voice assistant|

Press and hold the MFB for 1 second to activate the voice assistant on your phone.

Audio switching| During a call, press and hold the MFB for 2 seconds to switch between the headset and phone speaker.
Mute/Unmute the Mic| Short press the MFB to mute or unmute the Microphone.

Clear pair record

| Press and hold the MFB and Volume – for 5 seconds to clear the pair record in the headset. When it is cleared, the headset will not be automatically reconnected and you need to establish connection again.

MFB/Mute Button

|

Charge reset

|

Press and hold the MFB and connect the charging cable to charge the headset. This operation resets and reboots the headset.

---|---|---

EQ mode

| When playing music, double click the MFB to choose from Pop mode, Bass mode, or Vocal mode.

Phone Button

|

Play/Pause

| Short press the Phone Button to play/pause music.

Answer a call

| Short press the Phone Button to answer an incoming call.

Hang up a call

| Short press the Phone Button to hang up a call.

Reject a call

|

Press and hold the Phone Button for 1 second to reject an incoming call.

Redial a call

| Double press the Phone Button to dial the last number dialed.

Call waiting

| To answer a new call and hang up the current call, short press the Phone Button.
Phone Button| Call waiting| To answer a new call and keep the current call, double press the Phone Button.
---|---|---
To keep the current call and reject the new call, press and hold the Phone Button for 2 seconds.
To alternate between callers, double press the Phone Button.

Volume +

|

Volume Up

| Press the Volume + button. (When the volume reaches top level, you will hear a “beep” sound.)
Next Song| Press and hold Volume + for 1 second.

Volume –

| Volume Down| Press the Volume – button.
Previous Song| Press and hold Volume – for 1 second.

Charging the Headset

  1. When the LED indicator flashes RED, please charge the headset.
  2. Connect the USB-C end of the charging cable to the headset and the USB-A end to a booted PC, charger, or power bank. The LED indicator lights in steady RED.
  3. Charging is completed in about 2 hours. The LED indicator lights in steady BLUE when the headset is fully charged.

Notes

  1. When the headset will not be used for a long haul, charge it at least once every 2 months.
  2. It is not recommended to use the headset while charging.
  3. When the battery voltage is lower than 3.3V, you will hear “Battery Low” once every 3 minutes.

LED Indicator Light

Mode LED Indicator Light
Power on Blue Light flashes twice
Power off Red Light flashes twice
Pairing mode Red & Blue Light flash alternately
Connected standby mode Blue Light flashes once every 10 seconds
Playing Music Blue Light flashes once every 10 seconds
Talking Blue Light flashes once every 10 seconds
Delete pair record Blue and Red LED light up for 1 second
Link Loss (out of range) Blue Light flashes once every 10 seconds
Low battery Red Light flashes
Charging Steady Red Light
--- ---
Fully charged Steady Blue Light
Incoming Call Blue LED flashes

Voice Prompt

Status Voice Prompt
Power on Power on
Pairing mode Pairing
Pair success Paired
Headset connected Your headset is connected
Headset disconnected Your headset is disconnected
Low battery Battery Low
Power off Power off
Mute the Mic Mute on
Unmute the Mic Mute off
Pop Mode Pop Mode
Bass Mode Bass Mode
Vocal Mode Vocal Mode

FAQs

  • Q: Can I use the headset while it is recharging?
1.  **A:** Yes, but extremely low battery or poor power quality may cause electrical noise. We do not recommend frequent use in this way as it will shorten the battery life.
  • Q: How to reconnect the headset and what to do when it fails to reconnect?
1.  **A:** When TK-HS005 is paired with your device successfully, it will reconnect to the paired device automatically within 10 minutes every time it powers on. If the reconnection failed, please try pairing again. It will power off if reconnection failed over 10 minutes.
2. When the headset goes out of operation range, you will hear “Your headset is disconnected”. It will reconnect automatically after entering the operation range.
3. To avoid reconnection failure, keep the headset away from electromagnetic interference devices such as microwave ovens, base stations, etc.
  • Q: What’s the password for pairing?
1.  **A:** Some devices may require a password for pairing. Try entering 0000, 8888, 1111, or 1234.
  • Q: What devices can recharge the headset?
1.  **A:** Any charger, car charger, power bank, PC, etc. with DC 5V/above 500mA output.
  • Q: What to do if I cannot turn the power on?
1.  **A:** Please try charge reset. Press and hold the MFB and connect the charging cable to charge the headset. After the charge reset, if the charging cable is not disconnected, the headset will reboot and function normally.
  • Q: What to do if I fail to pair the headset with my devices?
1.  **A:** Power off the headset. Disconnect and connect the USB dongle again, then power on the headset.
2. Try charge reset.
3. If the above methods do not help, you may contact our customer service for more support.
  • Q: Why does the headset power off automatically?
1.  **A:** When the headset is not connected over 10 minutes or the battery is too low, the headset will power off automatically.

Limited Warranty

Limited 12-Month warranty

What this warranty covers

Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”)warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.

What the period of coverage is

  • Unichain warrants the TECKNET product for 12 Months.

What will we do to correct problems?

  • Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?

All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty

  • Please contact retailers or visit TECKNET website or email [email protected] for more information.
  • To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.

Disclaimer

Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

Correct Disposal of This Product

( Waste Electrical& Electronic Equipment )

This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.Household user should contact either the retailerwhere they purchased this product, or their local government office, for  details of where and how they can take this item for environmentally safe recycling.Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type TK-HS005 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/

FCC Statement

Operation is subject to the following three conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.
  3. This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio / TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS

  1. RETAIN THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
  2. Before using the product, read all instructions and caution markings on the product, accessories, and device.
  3. Keep the product away from the fire to avoid an explosion.
  4. Do not place the product in or near an inflammable, explosive, or hazardous object.
  5. Do not operate the product with a damaged cord or plug.
  6. Do not operate the product if it has been damaged in any way.
  7. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
  8. Do not throw or shake the product.

SCAN

Documents / Resources

| TECKNET TK-HS005 Wireless Bluetooth Trucker Headset with Microphone [pdf] User Manual
TK-HS005 Wireless Bluetooth Trucker Headset with Microphone, TK-HS005, Wireless Bluetooth Trucker Headset with Microphone, Bluetooth Trucker Headset with Microphone, Trucker Headset with Microphone, Headset with Microphone, Microphone
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

TECKNET User Manuals

Related Manuals