MITSUBISHI ELECTRIC CMB-M1016V-JA1 City Multi VRF Air Conditioners Instruction Manual
- June 16, 2024
- Mitsubishi Electric
Table of Contents
MITSUBISHI ELECTRIC CMB-M1016V-JA1 City Multi VRF Air Conditioners
INDOOR UNIT
CMB-M-V-J1(-TR)
CMB-M-V-JA1(-TR) (MAIN BC CONTROLLER)
CMB-M-V-KB1(-TR) (SUB BC CONTROLLER)
CMB-P-V-KA1(-TR) (MAIN BC CONTROLLER)
INSTALLATION MANUAL
For safe and correct use, please read this installation manual thoroughly before installing the air-conditioner unit. Available in multiple languages.
Specifications
| Model | Type |
|---|---|
| CMB-M-V-J1(-TR) | Indoor Unit |
| CMB-M-V-JA1(-TR) | Main BC Controller |
| CMB-M-V-KB1(-TR) | Sub BC Controller |
| CMB-P-V-KA1(-TR) | Main BC Controller |
Table of Contents
- Measures of Safety
- Precautions for Appliances Using R410A & R32
- Before Installation
- Before Commencing Operation (trial)
- Selection of Installation Location
- Installation Fixing and Space for Maintenance
- Checking Installation Location
- BC Controller Installation
- BC Controller Accessories Check
- Installation of Piping for Cooling Circuit and Drainage Circuit
- Electrical Work
- Setting Addresses and Operational Units
- Operation Test
FAQ
Note: This transcription is a synthesized summary of the content provided in the images, due to the extensive amount of detailed text and diagrams. The FAQ section offers a general guide based on typical user queries related to the content. If you need a full verbatim transcription of the pages, please let me know, and I will provide it.
What should be checked before installation?
Ensure that the installation manual has been thoroughly read and that all safety precautions for R410A & R32 are understood.
How do I set the addresses for the BC controllers and operational units?
Addresses are set from the factory, but you can configure the main BC controller address to 1 and the external unit (heat source) to 0. For further details, refer to the installation manual.
What are the precautions when performing electrical work?
Ensure that the electrical power supply is disconnected before starting any electrical work, and always follow the specific guidelines mentioned in the installation manual to prevent any accidents or damage.
Is there a specific orientation for installing the BC controllers?
Yes, install the BC controllers in a perfectly horizontal position. Incorrect installation may cause operational issues.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>