Hanwha Vision SMT-2710 Security LED Monitor User Manual
- June 16, 2024
- Hanwha Vision
Table of Contents
SMT-2710 Security LED Monitor
Product Information
Specifications
- Product Name: Security LED Monitor
- Model: SMT-2710
- Trademark: Registered
Overview
The Security LED Monitor is a high-quality monitor designed for
security purposes. It provides clear and accurate visuals to
enhance security surveillance systems.
Important Safety Instructions
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean the contaminated area on the product surface with a soft,
dry cloth or a damp cloth. (Do not use a detergent or cosmetic
products that contain alcohol, solvents or surfactants or oil
constituents as they may deform or cause damage to the
product.) -
Do not block any ventilation openings, install in accordance
with the manufacturer’s instructions. -
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat. -
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet. -
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus. -
Only use attachments/accessories specified by the
manufacturer. -
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. -
Unplug this apparatus during lightning storms or when unused
for long periods of time. -
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
Standards Approvals
The Security LED Monitor complies with relevant industry
standards and approvals.
Before Start
Before using the Security LED Monitor, please take note of the
following:
-
Hanwha Vision retains the copyright on this manual.
-
This manual cannot be copied without Hanwha Vision’s prior
written approval. -
We are not liable for any or all losses to the product incurred
by your use of non-standard product or violation of
instructions.
FAQ
Q: Can I use this monitor for gaming?
A: The Security LED Monitor is primarily designed for security
purposes and may not provide optimal performance for gaming.
Q: Can I mount this monitor on a wall?
A: Yes, you can mount the Security LED Monitor on a wall using a
compatible bracket or mount specified by the manufacturer.
Q: What should I do if the monitor stops working?
A: If the monitor stops working or exhibits any abnormalities,
please refer all servicing to qualified service personnel.
SECURITY LED MONITOR
User Manual
SMT-2710
Security LED Monitor User Manual
Copyright ©2023 Hanwha Vision Co., Ltd. All rights reserved.
Trademark Each of trademarks herein is registered. The name of this product
and other trademarks mentioned in this manual are the registered trademark of
their respective company.
Restriction Copyright of this document is reserved. Under no circumstances,
this document shall be reproduced, distributed or changed, partially or
wholly, without formal authorization.
Disclaimer Hanwha Vision makes the best to verify the integrity and
correctness of the contents in this document, but no formal guarantee shall be
provided. Use of this document and the subsequent results shall be entirely on
the user’s own responsibility. Hanwha Vision reserves the right to change the
contents of this document without prior notice. Design and specifications are
subject to change without prior notice.
! OVERVIEW
overview
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow all
the safety instructions listed below. Keep these operating instructions handy
for future reference.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth. (Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents as they may deform or cause damage to the product.)
- Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Standards Approvals
BEFORE START
You have to keep in mind the following notices : ~ Hanwha Vision retains the
copyright on this manual. ~ This manual cannot be copied without Hanwha
Vision’s prior written approval. ~ We are not liable for any or all losses to
the product incurred by your use of non-standard product or violation of
instructions mentioned in this manual. ~ Contact the retailer for
troubleshooting help.
J Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. M This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
` This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
English _3
overview
SAFETY INSTRUCTIONS
Do not use a damaged power cord or plug or a damaged or loose power outlet. ~
Otherwise, this may result in electric
shock or fire.
Ensure that the power plug is plugged into the power outlet firmly and
correctly. ~ Otherwise, this may result in fire.
Power
Do not touch the power plug with wet hands when removing or plugging the plug
into the outlet. ~ Otherwise, this may result in electric
shock
Do not forcefully bend or pull the power plug and do not place any heavy
material on it. ~ Otherwise, this may result in fire.
Make sure to connect the power cord to a grounded power outlet. ~ Otherwise,
it may result in electric shock
or personal injury.
Do not connect multiple appliances to the same power outlet. ~ Otherwise, this
may cause fire due to
overheating.
Do not disconnect the power cord while using the product.
~ Otherwise, this may result in damage to the product due to electric shock.
To disconnect the apparatus from the mains, the plug must be pulled out from
the mains socket, therefore the mains plug shall be readily operable.
~ Otherwise, this may cause electric shock or fire.
Use only the power cord provided by our company. Do not use the provided power
cord of another product.
~ Otherwise, this may result in fire or electric shock.
Connect the power plug to a wall outlet that can be easily reached.
~ When a problem occurs with the product, you must unplug the power plug to
cut the power off completely. You cannot cut the power off completely using
only the power button on the product.
Installation
Ensure that at least two persons lift and move the product.
~ Otherwise, it may be dropped and cause personal injury, and/ or damage the
product.
When installing the product in a cabinet or rack, make sure that the front end
of the bottom of the product does not project out.
~ Otherwise, it may fall or cause personal injury.
~ Use a cabinet or rack of a size appropriate to the product.
Do not place candles, mosquito repellant, cigarettes and any heating
appliances near the product.
~ Otherwise, this may result in fire.
Keep heating appliances as far away from the power cord or the product as
possible.
~ Otherwise, this may result in electric shock or fire.
Do not install it in a badly ventilated location such as a bookcase or closet.
~ Otherwise, this may result in fire due to an increase in the internal
temperature.
When putting the product down, make sure to put it down softly.
~ Otherwise, this may result in damage to the screen display.
Do not place the front of the product on the floor.
~ Otherwise, this may result in damage to the screen display.
Ensure that an authorized installation company installs the wall mount.
~ Otherwise, it may fall and cause personal injury.
~ Make sure to install the specified wall mount.
Install your product in a well ventilated location. Ensure that there is a
clearance of more than 4 inches (10 cm) from the wall.
~ Otherwise, it may result in fire due to an increase in the internal
temperature.
Ensure that the packaging vinyl is kept away from children.
~ Otherwise, it may result in serious harm (suffocation) if children play with
it.
If the height of your monitor is adjustable, do not place any object or part
of your body on the stand when lowering it.
~ This may cause damage to the product or the person carrying it.
Clean
Do not spray cleaner directly onto the surface of the product.
~ Otherwise, this may result in the discoloration and distortion of the
structure and the screen surface may peel off.
When cleaning the power plug pins or dusting the power outlet, clean it with a
dry cloth.
~ Otherwise, it may result in fire.
When cleaning the product, disconnect the power cord and clean it with a soft,
dry cloth.
~ (Do not use chemicals such as wax, benzene, alcohol, thinner, mosquito
repellant, lubricant, or cleaner.) These may change the appearance of the
product surface and peel off the indication labels on the product.
Since the product housing is easily scratched, make sure to use the specified cloth only.
When cleaning the product, make sure to disconnect the power cord. ~
Otherwise, it may result in electric shock
or fire.
When cleaning the product, do not spray water directly onto the main body of
the product. ~ Ensure that water does not enter the
product and that it is not wet. ~ Otherwise, this may result in electric
shock, fire or a malfunction.
4_ overview
! OVERVIEW
Others
The product is a high voltage product. Do not disassemble, repair or modify
the product yourself.
~ Otherwise, this may result in electric shock or fire. If the product needs
to be repaired, contact a Service Center.
If there is a strange smell or a strange sound or smoke is coming from the
product, disconnect the power plug immediately and contact a Service Center.
~ Otherwise, this may result in electric shock or fire.
Do not place this product in a location exposed to moisture, dust, smoke,
water, or in a car.
~ Otherwise, this may result in electric shock or fire.
When you drop the product or the case is broken, turn the power off and
disconnect the power cord. Contact a Service Center.
~ Otherwise, this may result in electric shock or fire.
Never touch the power cord during a thunderstorm because it could be extremely
dangerous.
~ Otherwise, this may result in electric shock or fire.
Do not try to move the monitor by pulling only the wire or the signal cable.
~ Otherwise, it may fall and result in electric shock, damage to the product
or fire due to damage to the cable.
Do not lift or move the product back and forwards or right and left while only
holding the power cord or signal cables.
~ Otherwise, it may fall and result in electric shock, damage to the product
or fire due to damage to the cable.
Make sure that the ventilating opening is not blocked by a table or curtain.
~ Otherwise, it may result in fire due to an increase in the internal
temperature.
Do not place any containers containing water, vases, flowerpots, medicines as
well as any metal on the product.
~ If water or a foreign material enters the product, disconnect the power cord
and contact a Service Center.
~ This may result in a product malfunction, electric shock, or fire.
Do not use or keep combustible spray or flammable material near the product.
~ Otherwise, this may result in an explosion or fire.
Do not insert any metal, such as chopsticks, coins, pins and steel, or
flammable objects, such as matches or paper, inside the product (through the
ventilating openings, input and output terminals, etc).
~ If water or foreign material enters the product, disconnect the power cord
and contact a Service Center.
~ Otherwise, this may result in electric shock or fire.
When using a fixed screen for a long time, an afterimage or stain may occur.
~ If you are not going to use the product for an extended period of time, set
it to sleep mode.
To avoid eyestrain, do not sit too close to the product.
Do not install it in an unstable location such as an unstable rack or uneven
surface or a location exposed to vibrations.
~ Otherwise, it may fall and cause personal injury and/or damage the product.
~ If you use the product in a location exposed to vibrations, it may damage
the product and result in fire.
If you have to move the product, turn off the power and disconnect the power
plug and all the cables connected to the product.
~ Otherwise, it may result in electric shock or fire.
Ensure that children do not hang onto the product or climb up onto the
product. ~ The product may fall and cause personal
injury or death.
Do not place the product in a location exposed to direct sunlight or near any
heat such as a fire or heater. ~ This may reduce the lifetime of the
product, and may result in fire.
When there is a gas leak, do not touch the product or the power plug;
ventilate immediately. ~ If a spark occurs, it may cause an
explosion or fire.
Be careful when adjusting the angle of the product or the height of the stand.
~ This may result in personal injury as your
hand or fingers may become caught. ~ Also, if you tilt the product too far, it
may
fall and cause personal injury.
When using headphones or earphones, do not turn the volume too high. ~ Having
the sound too loud may damage
your hearing.
If you do not use the product for a long period of time, disconnect the power
cord from the power outlet. ~ Otherwise, this may result in overheating
or fire due to dust, and may result in fire due to electric shock or leakage.
Do not drop any objects onto the product or cause any impact to the product. ~
Otherwise, this may result in electric
shock or fire.
Do not place any heavy items or toys or confectionery, such as cookies etc.
that may attract the attention of children and to the product.
~ Your children may hang onto the product causing it to fall and this may
result in personal injury or death.
Do not use a humidifier near the product.
~ Otherwise, this may result in electric shock or fire.
If the product has been turned on for Keep the small accessories in a
a long time, the display panel
location out of the reach of children.
becomes hot. Do not touch it.
Do not install the product in a location low enough for children to reach.
~ Otherwise, it may fall and result in personal injury.
~ Since the front part of the product is heavy, install the product on a level
and stable surface.
Do not put any heavy objects on the product.
~ This may result in personal injury and/or damage to the product.
English _5
overview
CONTENTS
OVERVIEW
3
3 Important Safety Instructions 3 Before Start 4 Safety Instructions 7 Package Contents 7 Names and functions of each part
INSTALLATION
9
9 Before Installing the Product 9 Assembling the stand 10 Installing Wall Mount Parts
CONNECTING WITH OTHER DEVICE
11
11 Things to check before connection 11 Connecting with external devices
MENU SETTINGS
13
13 Screen (OSD) menu settings 13 Video settings 13 Screen settings 14 OSD settings 14 System settings 14 Reset
APPENDIX
15
15 Product Overview 16 Troubleshooting
6_ overview
! OVERVIEW
PACKAGE CONTENTS
Please unwrap the product, and place the product on a flat place or in the
place to be installed. Please check the following contents are included in
addition to the main unit. ` Accessory category and quantity may differ
depending on sales region.
NAMES AND FUNCTIONS OF EACH PART
Back
Monitor HDMI Cable
Power Cord Stand
Quick Start Guide
MENU
a
AUTO
DP
HDMI
VGA
AUDIO IN
h
b
c d e fg
Button
Description of functions
When the button is pressed while the product is on, the menu screen appears.
1 MENU
` Press the [AUTO] button to exit the screen adjustment menu.
Press the button while the menu screen is displayed to move the menu or adjust
the value. ` If you press the button while the menu screen is not displayed,
the
a Panel key
Press the button while the menu screen is displayed to move the menu or adjust
the value. ` If you press the button while the menu screen is not displayed,
the
2 AUTO If you press the button while the menu screen is displayed, the selection function is enabled.
Turns the power to the product on/off.
English _7
overview
Name
b Power c DP d HDMI e VGA f AUDIO IN g AUDIO OUT h Anti-theft lock
Terminal to connect power.
Description of functions
DP input terminal
HDMI input terminal
VGA input terminal
Used to input sound using the sound cable.
Used to send sound to headphones or external speakers.
This device can be used safely in public places.
Anti-theft Lock
– The locking device shape and locking method depend on the manufacturer.
Please refer to the user guide provided with your anti-theft locking device
for details.
– The following images are for reference only. Real-life applications may
differ.
To lock an anti-theft locking device
1. Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2. Put one end of the cable through the loop on the other end.
3. Insert the locking device into the anti-theft lock slot at the back of the product.
4. Lock the locking device.
MENU
AUTO
` An anti-theft locking device can be purchased separately.
` Refer to the instruction manual supplied with the lock for detailed information on how to use it.
` You can purchase a lock at most stores specializing in electronics, or via the Internet.
DP
HDMI
VGA
AUDIO IN
8_ overview
! INSTALLATION
installation
Please take note of the followings before using this product.
~ Do not use the product outdoor. ~ Do not spill water or liquid in the
connection part of the product. ~ Do not impose the system to excessive shock
or force. ~ Do not pull out the power plug forcefully. ~ Do not disassemble
the product on your own. ~ Do not exceed the rated input/output range. ~ Use a
certified power cord only. ~ For the product with an input ground, use a
grounded power plug.
BEFORE INSTALLING THE PRODUCT
Ventilation requirement
If the product is installed in a poorly ventilated area, it might be damaged
due to the temperature rising inside the product. Ensure there is enough space
around the product before installation.
Vertical wall mount condition
A. Minimum 40 mm B. Ambient temperature Measuring point <35°C
10cm
10cm
10cm
10cm
Installation conditions for standing monitors
10cm
10cm
10cm
10cm
ASSEMBLING THE STAND
Before assembling the product, make sure that its screen is facing down when
placing it on a flat and safe surface. Place the product on a soft cloth or
product wrapping paper to protect it before installation. 1. Assemble the base
and neck of the stand.
2. Align the grooves on the neck with the grooves of the monitor, and attach
them together.
English _9
installation
For detaching the stand,
1. Press the button behind the monitor to detach the stand from the monitor.
2. Push the fixing hook on the stand base to detach the neck from the stand
base.
10_ installation
INSTALLING WALL MOUNT PARTS
Installing Wall Mount Kits
The wall mount kit (sold separately) allows you to hang the product on a wall.
For more information on wall mounting, refer to the owner’s manual supplied
with the wall mount parts. When installing the wall mount, seek the help of a
technician. Hanwha Vision is not responsible for any damage to the product or
injury to the user or others caused by any accident due to a user’s attempt to
install the product.
Wall Mount Kit Specifications (VESA)
J Install the wall mount kit on a solid wall perpendicular to the floor. Please refer to the nearest store when installing on other materials. Installing on an inclined wall may cause the product to fall, which can result in serious injury. When using a VESA mount, select a product that can
hold 4 times the
weight of the monitor.
~ When you purchase our wall mount kit, you will find a detailed installation
guide and all parts required for assembly.
~ Do not use screws that are longer than the standard dimensions or that do
not conform to the VESA standard screw specifications. Using screws that are
too long may damage the inside of the product.
~ For wall mount parts that do not conform to the VESA standard screw
specifications, the screw length may vary depending on the wall mount
specifications.
~ Do not over-tighten the screws. The product may be damaged, or may fall,
resulting in injury. Hanwha Vision is not responsible for any damage to the
product or injury to the user or others caused by any accident due to a user’s
attempt to install the product.
~ Hanwha Vision is not responsible for damage to the product or injury to the
user caused by using noncompliant or non-VESA wall mount parts, or by the
customer not following the product installation instructions.
~ When hanging on a wall, two people should always lift the product.
~ The standard dimensions of the wall mount kit are shown in the table below.
[Unit: mm]
VESA dimensions (A * B) 100 × 100
Standard screws M4/L8
Quantity 4
J ` Do not install the wall mount kit with the product turned on. This may lead to injury due to electric shock.
connecting with other device
THINGS TO CHECK BEFORE CONNECTION
Check before connecting
J When connecting, refer to the instruction manual of the product to be connected. The number and position of external devices may differ depending on the product. Do not connect the power until all connections are complete.
Connecting the power supply during connection may damage the product. ` Check
the type of terminal behind the product you want to connect.
CONNECTING WITH EXTERNAL DEVICES
~ Connect the power cable after all cables have been connected. Disconnect the
power cable before connecting external devices.
~ You can connect the product to external devices in various ways. Select the
correct connection method for your external devices.
HDMI cable connection method
DP cable connection method
MENU AUTO
DP
HDMI
VGA
AUDIO IN
DP
VGA (D-SUB) cable connection method
MENU AUTO
DP
HDMI
VGA
AUDIO IN
HDMI
MENU AUTO
DP
HDMI
VGA
AUDIO IN
English _11
! CONNECTING WITH OTHER DEVICE
connecting with other device
Audio cable connection method
MENU AUTO
DP
HDMI
VGA
AUDIO IN
AUDIO IN
OR
12_ connecting with other device
menu settings
The screen adjustment menu can be set.
SCREEN (OSD) MENU SETTINGS
You can adjust menu settings by using the panel keys on the monitor. 1. Press
the [MENU] button to display the main menu. 2. Press the $/% buttons to select
the main menu, and then press the [MENU] button. 3. Press the $/% buttons to
select the sub-menu, and then press the [MENU] button. 4. Press the $/%
buttons to adjust the adjustment value. 5. Press the [AUTO] button to exit.
M To return to the previous screen, press the [AUTO] button. If you do not press any buttons for a certain period of time, the OSD menu
screen will disappear.
– You can set the time up to 60 seconds in
VIDEO SETTINGS
Sets the screen brightness, color, etc. 1. Press the [MENU] button to enter
the main menu. 2. Press the $/% button to select [ ] icon, and then press the
[MENU] button.
Contrast Brightness Color Temp. Auto Adjust Color Adjust
80 –
80 –
Cool Normal Warm User
1280×1024 60Hz
~ Contrast : Adjusts the difference in brightness between the object and the
environment. ~ Brightness : Adjusts the brightness of the screen.
~ Color Temp. : The color temperature can be adjusted and used depending on
the monitor color. You can select from Cool, Normal, Warm, User.
– User : Red/Green/Blue values can be adjusted manually.
Red Green Blue
39 –
40 –
42 –
1280×1024 60Hz
~ Auto Adjust : Adjust the screen’s up and down / left and right ratio
automatically. (Only available in VGA mode.) ~ Color Adjust : Adjust the light
and color of the monitor automatically. (Only available in VGA mode.)
SCREEN SETTINGS
The screen’s size and position can be adjusted. (The menu for screen settings
is only available in VGA mode.)
1. Press the [MENU] button to enter the main menu. 2. Press the $/% button to
select [ ] icon, and then press the [MENU] button.
H.Position V.Position Clock Phase
50 –
50 –
78 –
49 –
1280×1024 60Hz
~ H.Position: Adjusts the position of the screen to the left or right. ~
V.Position: Adjusts the position of the screen up or down. ~ Clock: Adjusts
the clock when it is too high. ~ Phase: Adjusts the focus.
English _13
! MENU SETTINGS
menu settings
OSD SETTINGS
Sets up OSD values. 1. Press the [MENU] button to enter the main menu. 2.
Press the $/% button to select [ ] icon, and then press the [MENU] button.
Language OSD H.Pos OSD V.Pos OSD Timer Transparency
English
50 –
50 –
15 –
0 –
1280×1024 60Hz
~ Language : Select the screen language. ~ OSD H.Pos : Moves the screen of the menu to the left or right. ~ OSD V.Pos : Moves the screen position of the menu up or down. ~ OSD Timer : The menu screen disappears if the screen does not change for a certain period of time. ~ Transparency : Sets the transparency of the menu screen.
SYSTEM SETTINGS
Configures the system. 1. Press the [MENU] button to enter the main menu. 2.
Press the $/% button to select [ ] icon, and then press the [MENU] button.
Mode Volume Signal Source Aspect Ratio DCR
PC Game Movie
50 –
VGA HDMI DP
16:9 Auto 4:3
On Off
1280×1024 60Hz
Overdrive
~ Mode : Select a screen mode appropriate for your viewing environment. – PC : A screen mode for PCs. – Game : A screen mode appropriate for games. – Movie : A screen mode appropriate for movies.
On Off 1280×1024 60Hz
14_ menu settings
~ Volume : You can adjust the volume. ~ Signal Source : You can select an
input mode. (VGA/HDMI/DP) ~ Aspect Ratio : You can select a screen size you
want.
– 16:9 : Screen ratio is 16:9. – Auto : The optimal aspect ratio changes to
4:3 or 16:9 depending on the input signal. – 4:3 : Screen ratio is 4:3. ~ DCR
: If you set the DCR (dynamic contrast) to
adjusted. ~ Overdrive : The liquid crystal’s reaction time can be reduced by
running it at a higher voltage over a shorter
time.
RESET
Resets the monitor settings to default.
Reset
1280×1024 60Hz
appendix
PRODUCT OVERVIEW
unit : mm
English _15
! APPENDIX
appendix
TROUBLESHOOTING
Problems and Symptoms The screen appears and disappears repeatedly. The screen
will not switch on. The screen seems to be flowing down. The screen is too
bright. The screen is too dark. The product spontaneously turns itself off.
The image on the screen appears strange.
The brightness and color are strange. I can see a dotted line on the edge of
the screen. I can see lines (red, green, blue) on the screen. The screen is
unstable and stops.
The image is not displayed on the full screen. I cannot hear any sound.
Troubleshooting
~ Check the cable connection between the product and the external device, and
check the locking status of the connection device.
~ Confirm that the power cable is properly connected.
~ Check the cable connected to the product.
~ Adjust the brightness and contrast.
~ Confirm that the power cable is firmly connected to the product and to the
power outlet.
~ Video compression in scenes with fast transitions, such as sports or action
movies, can cause screen distortion.
~ Low signal level or poor quality may cause screen distortion. This is not a
product issue.
~ Cellular phones within a 1 meter radius may cause interference with analog/
digital products.
~ Adjust the screen options using the screen menu. ~ Reset the screen with the
default screen settings.
~ If the screen is the original size, try changing it to 16:9.
~ This occurs due to a fault in the DATA SOURCE DRIVER IC of the monitor.
Contact Hanhwa Vision Service Center to solve the problem.
~ Screen pauses may occur when the resolution is different from the
recommended resolution, or when the signal is unstable. To solve this problem,
change the resolution of the external device to the recommended resolution.
~ Try adjusting the screen size option of the product or external device.
~ Check the connection of the audio cable or adjust the volume. ~ Check the
volume.
Problems and Symptoms The sound is too quiet. The image appears but no sound
plays.
I can hear a strange noise from the speaker.
The product smells of plastic. I cannot hear any sound in HDMI mode. The
monitor is tilted to the side.
Troubleshooting
~ Try adjusting the volume.
~ When using external devices Make sure that the audio cable is properly connected to the audio input terminal of the product. Check the audio output
options of the external device. (For example, if HDMI is connected to the
monitor, you may need to change the audio options of the cable box to HDMI.)
~ Re-connect the device’s power cable and reboot the connected device.
~ Check the cable connections. Make sure that the video cable is not connected
to the audio input.
~ If the cable is connected, check the signal strength. ~ Sound may be
distorted due to a low signal level.
~ This is a normal smell, and will disappear over time.
~ If you connect an external device that supports some lower versions of HDMI
to a product that supports the latest HDMI standard, the colors displayed on
the screen may not be normal, or the audio or video may not play. If this
happens, connect both the HDMI cable and a separate audio cable.
~ Separate the stand from the product and reassemble it.
16_ appendix
Hanwha Vision cares for the environment at all product manufacturing stages,
and is taking measures to provide customers with more environmentally friendly
products. The Eco mark represents Hanwha Vision’s devotion to creating
environmentally friendly products, and indicates that the product satisfies
the EU RoHS Directive.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking on the product, accessories or literature
indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at
the end of their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes
for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate
battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries
in this product should not be disposed of with other household waste at the
end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the
reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the
environment. To protect natural resources and to promote material reuse,
please separate batteries from other types of waste and recycle them through
your local, free battery return system.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>