Vorago AVR-300 Surge Suppressor 300 User Guide

SUPRESOR DE PICOS 300
Quick guide

KNOW YOUR DEVICE

1. Output socket
2. Power on/off button
3. LED indicators| 4. Delay timer
5. RJ-45/11 ports
6. Input plug
---|---

INSTALLATION

• To prevent damage, make sure that the load you connect does not exceed 15 Amps.

• The voltage limits that the surge protector can protect are specified on the capacity label.

• Set the delay timer of the surge protector according to your load type:
  a) If it is general electronics, we recommend setting the timer to 15 or 30 seconds.
  b) If it is a refrigeration load or there are usually continuous variations, please set it to 3 minutes for better protection; as well as disconnect from the socket if there is no stability of electricity.

• Before connecting, turn off the device you want to protect.

• Connect the surge protector to a power outlet.

• Connect the device to the output socket of the surge protector.

• Once the power supply is connected, the LED indicator will turn on in standby mode. After the delay timer has ended, the normal LED will remain on and your load will be protected. · To turn on or off the surge protector, press and hold the power button for 1 second.

LED INDICATION TABLE

► AC mode

Status| Low input LED
15 sec LED| Normal input LED
30 sec LED| High input LED
3 min LED
---|---|---|---
AC input voltage is low voltage| LED is ON| LED is OFF| LED is OFF
AC input voltage is low voltage| LED is OFF| LEO is ON| LED is OFF
AC input voltage is low voltage| LED is OFF| LED is OFF| LED is ON

► Stand-by mode

Status| Low input LED
15 sec LED| Normal input LED
30 sec LED| High input LED
3 min LED
---|---|---|---
Voltage protector started the 15sec delay| LED is flashing| LED is OFF| LED is OFF
Voltage protector started the 30sec delay| LED is OFF| LED is flashing| LED is OFF
Voltage protector started the 1 min delay| LED is OFF| LED is OFF| LEO is flashing

► Off mode

Status| Low input LED
15 sec LED| Normal input LED
30 sec LED| High input LED
3 min LED
---|---|---|---
Voltage protector is on OFF mode| LED is flashing| LED is flashing| LED is flashing
AC input disconnected| LED is OFF| LED is ON| LED is OFF

DATA SHEET

Limited product warranty **

**

Vorago equipment and / or accessories are covered by a limited warranty for the time indicated in the annexed validity table, counting from the date of acquisition, against any manufacturing and operation defect, provided they have been used under normal conditions of use during the warranty period and for which it was manufactured. Vorago warranty the buyer the absence of anomalies regarding the materials.

12 Months
LCD Monitor

• Except in panel (screen display) for which it will only be 12 months.| 36 Months*
  Computer equipment 3 years including Nanobay 3.
• Except computer equipment where the processor is integrated on the motherboard it will only be 12 months.| 36 Months *

Important warranty policy: Please read and complete this warranty policy and seal it in the store when purchasing the product.

  Product: BT Earbuds|
---|---
  Model: AVR-300|    Dealer stamp
  Brand: Vorago
  Serial number:
  Invoice number:
  Delivery date:

Responsibilities

The total responsibility of Vorago will be to repair or replace the product, including labor and parts, at no cost to the buyer when it is returned to the point of sale, presenting this warranty policy properly completed and stamped by the establishment where it was purchased. The product or copy of the receipt or receipt or invoice, in which data of the product the date of purchase is specified, to verify the times within the warranty. Vorago may use new parts, restored or used in good condition to repair or replace any product, at no additional cost to the consumer. In the case of equipment and / or accessories that can not be repaired, the change will be generated by a similar product or with superior characteristics. This warranty covers the transportation expenses of the product derived from its fulfillment; which will be directly attributable to the supplier of the product. In all replacement products, the original warranty period will be renewed. Vorago is governed by international standards for the manufacture of products.

How to obtain warranty support

Warranty claims are processed through the point of sale, during the first 15 days after the purchase, as long as they meet the requirements. Guarantee claims that can not be processed through the point of sale and any concerns related to the product purchased should be sent with the prepaid guide by Vorago to the address of the Vorago headquarters in Francisco Villa No. 3, Col. San Agustín, CP 45645, Tlajomulco de Zúñiga, Jalisco, Mexico.
Except in situations of force majeure or fortuitous event, the repair time in no case will be greater than 30 calendar days from the date of receive of the equipment in Vorago.

Exclusions
This warranty is has valid in the following cases:
a) When the product had been used in conditions other than normal.
b) When the product has not been operated in accordance with the instructions for use.
c) When the product has been altered or repaired by unauthorized persons by Vorago.
Vorago does not offer any other express warranty for this product.
To make the warranty valid, as well as the acquisition of parts, components, consumables and accessories
To validate a warranty, the following information must be sent to the email: garantias@voragolive.com

1. Model and color
2. Product failure
3. Ticket or purchase invoice (digitized)
4. Your address with CP, telephone and full Name.

Available in the establishment where the product was purchased and / or in our central offces:

Returns
In the case of product return, it will only be the place of purchase by the end customer. Subject to the return policies established by the same seller.

www.voragolie.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>