APC Easy Rack 1U Cable Manager in Depth ER7DCM Installation Guide
- June 6, 2024
- APC
Table of Contents
Easy Rack 1U Cable Manager in Depth ER7DCM
Kit Instructions
Installation:
The 1U Cable Manager is installed to the front and rear vertical mounting rails on either side of your Easy Rack. The 1U Cable Manager can be adjusted to fit the depth of your Easy Rack. From the center of the mounting holes, the Cable manager can be extended from the minimum depth of 383mm (15.08 in.) to the maximum of 573mm (22.56 in.).
Use the four (4) M5 x 10 Phillips head screws provided to install the 1U Cable
Manager to the round holes on the inside edge of the front and rear vertical
mounting rails.
As standards, specifications, and design change from time to time, please ask
for confirmation of the information given in this publication.
© – 2021 APC by Schneider Electric. All rights reserved.
APC by Schneider Electric 70 Mechanic Street
02035 Foxboro, MA
USA
www.apc.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>