POTTER Pull Station Series Conventional Pull Station Owner’s Manual
- June 9, 2024
- POTTER
Table of Contents
POTTER Pull Station Series Conventional Pull Station
PULL STATION SERIES DIE-CAST METAL
- UL and cUL Listed, CSFM Listed, MEA Approved, ADA Compliant
- Single or Dual Action
- Terminal connectors
- 10 Amp Snap Action Switch
- Gold plated SPST contacts
- Optional auxiliary contacts
- Mounts on standard single gangbox
- Surface backboxes available
- High-gloss red enamel finish
- Glass break rod
- Made in the U.S.A.
Description
The Potter Pull Station Series offers a complete line of die-cast pull
stations for a variety of applications focusing mainly on fire alarm systems.
The pull stations are available in single or dual action models. All of the
pull stations have a 10-amp snap action switch and a dedicated terminal block
for the ease of wire connections. All of the metal is completely coated to
inhibit corrosion and provide for a uniform and quality finish.
The standard models have a hex key reset, however a key reset is also
available. The models are available with shallow and deep surface mount back
boxes and as a weatherproof version.
Operation
The Potter single action series of pull stations operate by pulling the white operating handle straight down and the handle will lock into place. The dual action stations require the lifting of the front cover and then pulling the white operating handle straight down. The stations are reset by opening the front and placing the handle in the normal position.
Engineering Specifications
The contractor shall furnish and install the Potter series of pull stations as
indicated. The pull station shall be die cast construction with a “T” type
pull handle that is ADA compliant. Single action pull stations shall be a
P32-1T. Dual action pull stations shall be the Potter P32-1T-LP. Any manual
pull station installed in an outdoor or wet location shall be a RMS-1T-WP
weather proof unit. The contact shall be a single pole, single throw switch
rated at 1 amp 30V DC/125V AC. The device shall have a terminal block for ease
of wiring. Once activated, the pull station shall be reset by opening the
front cover. Opening of the cover in a normal state shall initiate an alarm.
Specifications
- Switch Rating: 1 Amp @ 30 VDC 10 Amps @ 125 VAC
- Pull Station Dimensions : 4-3/4″ H x 3-1/4″ W x 7/8″ D
- Color: Red with raised white letters, white pull bar with raised red letters
For special application manual stations see bulletin #8910014.
For explosion proof manual stations see bulletin #8880014.
Ordering Information
| Type | Model Number | Stock Number | Contact Type |
|---|
__
__
Single Action
| P32-1T| 1000447| SPST
RMS-2T| 1000477| DPST
RMS-6T| 1000478| DPDT
RMS-1T-KL| 1000451| SPST
RMS-1T-KO| 1000450| SPST, key operated, no pull
Weather Proof| RMS-1T-WP| 1000401| __
SPST
Dual Action| P32-1T-LP| 1000476
Weather Proof Dual Action| RMS-1T-WP-LP| 1000403
Accessories| | | Notes
Dual Action| RMS-LP| 1000480| Converts single action to dual action
Back Box| P32-BB| 1000444| Surface mount back box
Back Box| P32-DBB| 1000445| Deep surface mount back box
Glass Rods| RMS-GB| 1000470| Replacement glass rods (10 per pkg)
Potter Electric Signal Co., LLC
St. Louis, MO
Cust Service: 866-240-1870
Tech Support:866-956-121
Canada 888-882-1833
www.pottersignal.com
References
- Fire Alarm Resources | Download fire alarm documents
- Potter Electric: Fire Alarms & Fire Sprinkler Systems