thomann 426958 Otamatone Techno White Instruction Manual

thomann 426958 Otamatone Techno White

Product Information

The Techno Otamatone is a musical instrument that produces sounds by pressing its stem switch and manipulating its mouth. It requires three AAA batteries for operation, and alkaline batteries are recommended for optimal performance. The Otamatone has various features, including volume and octave selection switches, a power/volume control switch, and an OTM Link for connecting to a smartphone or tablet. It also offers different playing techniques such as the push technique, portamento technique, wah wah technique, and vibrato.

Battery Setup

1. Open the battery cover using a screwdriver.
2. Insert three new AAA batteries, ensuring the correct polarity.
3. Tighten the screw to secure the battery cover.

Volume and Octave Selection

To adjust the volume, use the volume switch located on the Otamatone. Choose between OFF, Soft, or Loud settings. To select the desired octave level, use the octave switch and set it to Low, Medium, or High.

Power/Volume Control

To turn on the Otamatone and adjust the volume:

1. Turn the power/volume control switch to the right until it clicks. The LED light will come on.
2. To increase the volume, turn the switch towards the right. To decrease the volume, turn it towards the left.
3. To turn off the power, turn the switch all the way to the left until the LED light goes off.

Playing Techniques

There are several techniques you can try with the Otamatone:

• Push Technique: Push the stem switch to produce sound. Experiment with pushing different places on the switch for varying sounds.
• Portamento Technique: Push and hold the stem switch, then slide your fingers up and down to create a smooth sound effect. Adjust the pressure and try different octave settings for different pitches.
• Wah Wah Technique: While pushing the stem switch, open and close the mouth to create a wavering sound effect. Repeat this motion to achieve a “wah wah” sound.
• Vibrato: While performing the push technique, vibrate the stem switch to create a trembling or pulsating effect in the sound.

OTM Link

The Otamatone features an OTM Link that allows you to connect it to a smartphone or tablet. Simply plug in the included 4-pole 3.5mm stereo cable to utilize this feature.

Installation Instructions

Step 1 – Set up the Otamatone for playing.

How to change batteries

• Required batteries: AAA x 3
• Test batteries included.
• Alkaline batteries are recommended

• Open the battery cover with the right size plus (+) screwdriver.
• Place new batteries so that the (+) and (-) sides are in the right direction.
• Turn counterclockwise to open.
• Turn clockwise to close

AAA Batteries

• Place three new batteries facing the same way.

• (+) and (-) sides are indicated inside the box

• Attach the cover as shown and push to close.

• Tighten the screw.

Change the batteries when the sound is softer and intermittent

• Hint to make the batteries last:
• Turn the switch off after playing.

Selection of Volume and Octave

Step 2

Set up the Otamatone for playing

1. Turn the Power/volume control switch to the right until it clicks; LED light will come on.
2. Set the Octave switch to the desired level.

Hint to make the batteries last: Turn the power/volume switch off until it clicks after playing.

Step 3

Hold the Otamatone

Push raised dots to open the mouth.

Step 4

Techniques! – Try different techniques!

Push Technique

• Push the Stem switch anywhere! This will make „mmm“ sound.
• Push different places and the sound will change too.
• Push the Stem switch with your index finger and thumb.

Portamento Technique

• Push and hold the Stem switch.
• Slide the fingers up and down.
• This will make „peooow“ sound.
• Push a bit harder and slide to make sure the sound does not break.
• After mastering the technique, you can adjust the pressure.
• Change the Octave switch to try a different pitch.

Step 5
Techniques! – Try different techniques!

Wah Wah Technique

• While pushing the Stem switch, open and close the mouth.
• The sound changes from „woo“ to „wah“. Repeat this to make „wah wah wah“.
• This will vary the sound . The opening and the closing of the mouth entertains everyone!

Vibrato

• A tremulous or pulsating effect produced in an instrumental or vocal tone.
• Vibrate the Stem while doing the Push technique.
• The sound changes according to the vibration.

Step 6
OTM Link (Otamatone Music Link)

A new feature that allows you to connect the Otamatone to a smartphone or tablet. All you need to do is plug in the included 4-pole 3.5mm stereo cable. As easy as that!

• Not all Android devices can be used with the app.

Caution

• Devices without a 4-pole 3.5mm stereo jack can only be connected via OTM Link by using an adapter that supports microphone input.

• Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
• iPhone, iPad and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
• The iPhone trademark is used with permission of Aiphone Co., Ltd.
• Google Play and the Google Play logo are trademarks of Google Inc.
• Android is a trademark and registered trademark of Google Inc.

When using a 3.5mm adapter for the cable

• Make sure your adapter supports microphone input. If the adapter can only be used for musical output OTM Link will not work.
• Please note that due to app or device specifications OTM Link might not work properly.
• Make sure the adapter is not damaged. If it doesn’t fully transmit the signal OTM Link will not work properly.
• Using an adapter can result in lower volume. In this case, please adjust the volume through your device or the app.
• Using an adapter can create noise. It is not possible to fully prevent this problem but adjusting the volume through your device or the app can help.

Mouth Technique does not work while using the headphones

Step 7
OTM Studio

Each mode has a different looking fader.

Use this to adjust volume

You can choose between 9 instruments

Important Safety Instructions

Safety instructions for using AC power source:
Mishandling of power source may cause fatal accidents or serious injuries.

• Check the voltage rating before you connect the adapter to an electrical outlet to ensure that the required voltage and frequency match the available power source.
• Use only the specified AC adapter approved for use with this product. Wipe off dust from the AC adapter plug to avoid electric shock or short circuit.
• Electric Shock Hazard: Do not handle the AC-adapter with wet hands.
• Unplug the AC adapter after use.
• Be sure to grasp the adapter itself, not the cable, when disconnecting the AC adapter from the power source.
• Do not piggyback the electrical outlet. lt may cause overheating.
• Do not forcefully bend, twist, or pull the cable, or modify the cable.
• Do not put the cable under furniture, electric appliances, figurines, or any other heavy objects. Damaged cables may cause fire or electric shock.
• Do not use any AC adapter with damaged cable.
• In the event that the AC adapter becomes damaged or the unit malfunctions, turn the unit off and disconnect the AC adapter immediately.

For more information and other Otamatone models, visit the Thomann Website: https://www.thomann.de/gb/otamatone.html.

References

• Otamatone – Thomann UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>