PXN V9 Gaming Racing Wheel User Manual

Gaming Racing Wheel
User Manual

V9 Gaming Racing Wheel

Thank you for choosing and supporting PXN, please read this manual carefully before starting to enjoy your gaming experience.

System Requirements

Supported Platform: PC/PS3/PS4/XBOX ONE /XBOX SERIES X&S/SWITCH PC System: Windows 7/8/10/11

Product Appearance

Mounting Clamps Installation

The steering wheel comes with a pair of mounting clamps to fix the wheel on the table.
Step 1 Place the suction cup into the base slot and rotate the suction cup to lock it.
Step 2 Rotate the knob of the mounting clamps and insert it into the base slot of the steering wheel.
Step 3 Slide forward along the slot until it clicks into place.
Step 4 Place the steering wheel on the table and rotate the mounting clamp to tighten it.

Use on PC

Step 1 Please connect the pedals and the shifter according to your needs before use.
Step 2 Plug the USB cable of the steering wheel into the PC.
Step 3 After successfully connecting to the PC, the steering wheel will default to X-input mode, with the red indicator light staying on.
Step 4 Press the MODE button to switch to the corresponding mode before entering the game. Mode Switching Method:
Press and hold the MODE button for 3 seconds. Release the button when the red indicator light starts flashing. The mode switch is successful when the red indicator light remains on. X-input Mode, Recommended games: Need for Speed 15, Dirt 2/3/4, Ridge Racer, etc. D-input Mode, Recommended games: Farming Simulator 22, Euro Truck Simulator 2, etc.
Function testing of the steering wheel is available on a PC. The specific steps are as follows: Windows 7 System:
Open Control Panel Devices and Printers → Right-click on the Game controller icon → Game Controller Settings, and click Properties to perform a functionality test. Windows 10 System:
Settings Devices Game Controller Settings Devices and Printers → Right-click on the Game controller icon Click Properties to perform a functionality test.

Use on PS3

Step 1 Please connect the pedal and gear shifter as required before use.
Step 2 Plug the USB cable of the steering wheel into the PS3 console, then power on the PS3 console.
Step 3 Upon successful connection, the red indicator on the steering wheel will remain on. Then power on the PS3 console to enter the game or set up the related functions.

Use on PS4

Step 1 Please connect the pedals and the shifter according to your needs before use
Step 2 Power off the original PS4 controller, use a USB cable to connect the original PS4 controller to the USB port on the steering wheel.
Step 3 Plug the USB cable of the steering wheel into the USB port on the PS4 console, then tum on the PS4 console
Step 4 Press the MODE button on the steering wheel. Upon successful connection, the red indicator on the steering wheel will remain on.

Use on XBOX ONE/XBOX SERIES X&S

Stop 1 Please connect the pedals and the shifter according to your needs before use
Step 2 Power off the original XBOX ONE XBOX SERIES X&S controller, use a USB cable to connect the original XBOX ONE XBOX SERIES X&S controller to the USB port on the steering wheel
Step 3 Plug the USB cable of the steering wheel into the USB port on the XBOX ONE / XBOX SERIES X&S console, then turn on the XBOX ONE XBOX SERIES X&S console.
Step 4 Press the MODE button on the steering wheel. Upon successful connection, the red indicator on the steering wheel will remain on.

Use on SWITCH

On the SWITCH homepage, select Settings Controllers and Sensors click on the Pro Controller Wired Connection option and ensure that it is turned on.

• Connect with SWITCH Console
  Step 1 Please connect the pedals and the shifter according to your needs before use.
  Step 2 Plug the Type-C OTG adapter into the SWITCH console.
  Step 3 Connect the steering wheel USB cable to the Type-C OTG adapter
  Step 4 Upon successful connection, the red indicator on the steering wheel will remain on
  (Note: Type-C OTG adapter needs to be purchased separately.)

• Connect with SWITCH Dock
  Step 1 Please connect the pedals and the shifter according to your needs before use .
  Step 2 Place the SWITCH console on the dock ensuring it’s successfully connected
  Step 3 Plug the USB cable of the steering wheel into the SWITCH dock and power on the SWITCH console
  Step 4 Upon successful connection, the red indicator on the steering wheel will remain on

Gear Shifter Function

High/Low Gear Switching:
In the game, this button can be set as the button for switching between high and low gears.
Handbrake Switch:
In the game, this button can be set as the handbrake switch button.
Low Gears: 1, 2, 3, 4, 5,6, R1
High Gears: 7, 8, 9, 10, 11, 12, R2

Sensitivity Settings

• High Sensitivity
  Press and hold the “PROG” button until the red indicator flashes quickly, then press ” ↑ ” on the D-pad. The switching is successful when the red indicator remains on. (Suitable for PS3, PS4, XBOX ONE, XBOX SERIES X&S platforms)

• Medium Sensitivity
  Press and hold the “PROG” button until the red indicator flashes quickly, then press ” ← ” on the D-pad. The switching is successful when the red indicator remains on. (Suitabie for PS3, PS4, XBOX ONE, XBOX SERIES X&S platforms)

• Low Sensitivity
  Press and hold the “PROG” button until the red indicator flashes quickly, then press ” ↓ ” on the D-pad to save. The switching is successful when the red indicator remains on. (Suitable for PC platforms)

Custom Maximum Steering Effective Angle

What is the Maximum Steering Effective Angle?
For example, setting the maximum steering effective angle of the steering wheel to 180° means that turning left or right by 90° achieves the actual maximum steering; turning more than 90° is ineffective rotation.
• Setting Method
Step 1 Switch the steering whee! angle switch to the “900° position”.
Step 2 Press and hold the “PROG” button until the red indicator flashes quickly.
Step 3 Turn the steering wheel to the desired angle (must be more than 60°), then press the “OP TIONS” button. The red indicator will remain on when the setting is successful.

Button Programming

Programmable Buttons: Left paddle, Right paddle, Left pedal, Middle pedal, Right pedal, L3, R3, Gear shifter- High/low gear switch, Gear shifter- Handbrake switch, Gear shifter- 1~6 gears, Gear shifter- Reverse gear. Mappable Buttons: A, B, X, Y,L1, L2, R1, R2.
• Button Programming Method
Step 1 Press and hold the “PROG” button for 3 seconds until the red indicator flashes quickly.
Step 2 Press the Programmable Button, the red indicator will flash slowly.
Step 3 Press the Mappable Button, programming will be successful when the red indicator remains on.
•  Clear a Single Button Mapping
Step 1 Press and hold the “PROG” button for 3 seconds until the red indicator flashes quickly.
Step 2 Press the Programmable Button twice consecutively, it will be ceared successfully when the red indicator remains on.
• Clear All Button Mappings
Step 1 Press and hold the “PROG” button for 3 seconds until the red indicator flashes quickly.
Step 2 Press and hold the “OPTIONS” button for 4 seconds, all mapped buttons will be reset when the red indicator remains on, and the steering wheel sensitivity will retum to default high sensitivity.
• Note
Press and hold the “PROG” button for 3 seconds until the red indicator flashes quickly, then press the “PROG” button again to withdraw programming without changing the previous settings.
Press and hold the “PROG” button for 3 seconds until the red indicator flashes quickly, if there is no action, it will automatically withdraw programming after 10 seconds.

Audio Communication Function

The steering wheel is equipped with headphone and microphone functions, allowing for voice interaction on PS4, XBOX ONE, and XBOX SERIES X&S consoles.
The audio communication function will be limited when the gear shifter is connected to the steering wheel.

Advanced Settings for Steering VVheel

Download for iOS: Search [PAN Wheel] in App Store.
Download for Android: Search [PAN Wheel] in Google Play.
Install the [PXN Wheel] app on your phone, then enable BT and grant the required location permissions.
You don’t need to pair the device with your phone; just open the app to explore its features.
[PAN Wheel] App Features:

• Sensitivity Adjustment
• Button Mapping in Games
• Button Programming
• Effective Rotation Degree Setting
• Vibration Adjustment
• Button Function Testing

https://www.e-pxn.com/tutorial/pxn-v9

Product Specifications

< 150mA during vibration
< 500mA during guidance
Package Dimensions| About 410 360 307 mm
Product Dimensions| About 280 340 285 mm
Product Weight| About 2360 g
Operating Temperature| 10-40 °C
Operating Humidity| 20-80%

Warning

• Avoid strong vibrations, do not disassemble, modify, or repair the product yourself.
• Prevent water or other liquids from entering the product to avoid damage.
• Avoid storing in damp, high-temperature, or smoky environment.
• Apply appropriate force when connecting and removing the device.
• Children should use this product under adult supervision.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>