MICROCHIP MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit User Guide

: June 16, 2024
: MICROCHIP

Table of Contents

MICROCHIP MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit
Protection Feature
Preface
Product Overview
Installation and Operation
Worldwide Sales and Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MICROCHIP MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit

MICROCHIP-MCP37X1X-200-12--200-Msps-ADC-VTLA-Evaluation-Kit-
PRODUCT

Specifications

Product Name: MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit
Manufacturer: Microchip Technology Inc.
Model Number: MCP37X1X-200
Resolution: 12-Bit
Sampling Rate: 200 Msps

Protection Feature

Note the following details of the code protection feature on Microchip devices:

Microchip products meet the specifications contained in their particular Microchip Data Sheet.
Microchip believes that its family of products is one of the most secure families of its kind on the market today when used in the intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in the theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify, and hold harmless Microchip from any damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights unless otherwise stated.

Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design, and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, micro peripherals, nonvolatile memory, and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.

Trademarks
The Microchip name and logo, the Microchip logo, AnyRate, dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq, KeeLoq logo, Kleer, LANCheck, LINK MD, MediaLB, MOST, MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

ClockWorks, The Embedded Control Solutions Company, ETHERSYNCH, Hyper Speed Control, HyperLight Load, IntelliMOS, mTouch, Precision Edge, and QUIET-WIRE are registered trademarks of Microchip Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, EtherGREEN, In-Circuit Serial Programming, ICSP, Inter-Chip Connectivity, JitterBlocker, KleerNet, KleerNet logo, MiWi, motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PureSilicon, RightTouch logo, REAL ICE, Ripple Blocker, Serial Quad I/O, SQI, SuperSwitcher, SuperSwitcher II, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.

Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.
GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries.
All other trademarks mentioned herein are the property of their respective companies.
© 2014-2016, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.
ISBN: 978-1-5224-0887-1

Preface

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our website (www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level of the document. For the most up-to-date information on development tools, see the MPLAB® IDE online help. Select the Help menu, and then Topics to open a list of available online help files.

INTRODUCTION
This chapter contains general information that will be useful to know before using the MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit. Items discussed in this chapter include:

Document Layout
Conventions Used in this Guide
Recommended Reading
The Microchip Website
Customer Support
Document Revision History

DOCUMENT LAYOUT
This document describes how to use the MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit to demonstrate the performance of the MCP37X1X-200 device family. The manual layout is as follows:

Chapter 1. “Product Overview” – Important information about the MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit.
Chapter 2. “Installation and Operation” – Includes instructions on how to get started with the MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit.
Appendix A. “Schematics and Layouts” – Refer to the board’s web page for the complete Schematics and Layouts.
Appendix B. “Bill of Materials (BOM)” – Refer to the board’s web page for the complete Bill of Materials.

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description	Represents	Examples

Save__
Bold characters| A dialog button| Click OK
A tab| Click the Power tab
N‘Rnnnn| A number in verilog format, where N is the total number of digits, R is the radix and n is a digit.| 4‘b0010, 2‘hF1
Text in angle brackets < >| A key on the keyboard| Press ,
Courier New font:
Plain Courier New| Sample source code| #define START
Filenames| autoexec.bat
File paths| c:\mcc18\h
Keywords| _asm, _endasm, static
Command-line options| -Opa+, -Opa-
Bit values| 0, 1
Constants| 0xFF, ‘A’
Italic Courier New| A variable argument| file.o, where file can be any valid filename
Square brackets [ ]| Optional arguments| mcc18 [options] file [options]
Curly brackets and pipe character: { | }| Choice of mutually exclusive arguments; an OR selection| errorlevel {0|1}
Ellipses…| Replaces repeated text| var_name [, var_name…]
Represents code supplied by user| void main (void)

{ …

}

RECOMMENDED READING
This user’s guide describes how to use the MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit. Other useful documents are listed below. The following Microchip documents are available and recommended as supplemental reference resources.

MCP37211-200/MCP37D11-200 Data Sheet – “200 Msps, 12-Bit Low-Power ADC with 8-Channel MUX” (DS20005355)

THE MICROCHIP WEBSITE
Microchip provides online support via our website at www.microchip.com. This website is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the website contains the following information:

Product Support – Datasheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software
General Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listing
Business of Microchip – Product selector and ordering guides, latest Microchip press releases, a listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives

CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:

Distributor or Representative
Local Sales Office
Field Application Engineer (FAE)
Technical Support

Customers should contact their distributor, representative, or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document.
Technical support is available through the website at:
http://www.microchip.com/support.

DOCUMENT REVISION HISTORY

Revision C (August 2016)

Added additional troubleshooting information.
Minor typographical corrections.

Revision B (November 2014)

Minor typographical corrections.

Revision A (November 2014)

The initial release of this document.

NOTES:

Product Overview

INTRODUCTION
This chapter provides an overview of the MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Board (ADM00619) and covers the following topics:\

What is the MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Board (ADM00619)?
What is the MCP37XXX High-Speed Pipeline ADC Data Capture Card (ADM00506)?
What is the Pipeline ADC Utility Software?
MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit Requirements

WHAT IS THE MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Board (ADM00619)?
The MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Board (ADM00619) is intended to demonstrate the performance of the MCP37X1X-200 device family. This evaluation board is used together with:

MCP37XXX High-Speed Pipeline ADC Data Capture Card (ADM00506)
Pipeline ADC Utility Software Refer to Figure 1-1 for the system setup.

MICROCHIP-MCP37X1X-200-12--200-Msps-ADC-VTLA-Evaluation-Kit-
FIG-1

Evaluation Kit System Setup.
This evaluation board supports the following Microchip high-speed ADC device families:

The MCP37X1X-200, which is Microchip Technology Inc.’s baseline single-channel 12-bit 200 Msps pipelined Analog-to-Digital Converter (ADC) device family, featuring a built-in high-order digital decimation filter, gain and offset adjustment per channel, noise-shaping quantizer and fractional delay recovery.
The MCP37D1X-200 device family, features digital down-conversion and CW beamforming capability, in addition to the features offered by the baseline device family.

The MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Board (ADM00619) comes with the MCP37D11-200 device on board. All conditions and features can be eval-uated using this device. Refer to Figure 1-3 for close-up photos of the evaluation board.

MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit

MICROCHIP-MCP37X1X-200-12--200-Msps-ADC-VTLA-Evaluation-Kit-
FIG-2

WHAT IS THE MCP37XXX HIGH-SPEED PIPELINE ADC DATA CAPTURE CARD (ADM00506)?

The MCP37XXX High-Speed Pipeline ADC Data Capture Card (ADM00506) is an FPGA- based memory buffer for the digital data received from the Analog-to-Digital Converter (ADC) evaluation board. Figure 1-1 shows the connection of the data capture card directly between the evaluation board and the PC GUI.

The data capture card connects to the PC through a USB cable, providing the user with two functionalities:

The ability to send user commands directly to the device from the PC GUI.
The ability to collect data from the evaluation board and send it to the PC GUI. Refer to Figure 1-3 for close-up photos of the data capture card.

MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit

MICROCHIP-MCP37X1X-200-12--200-Msps-ADC-VTLA-Evaluation-Kit-
FIG-2

WHAT IS THE PIPELINE ADC UTILITY SOFTWARE?
The Pipeline ADC Utility software is the graphical user interface (GUI) used to communicate with and to configure the operating parameters of the device. The software communicates with the part through the data capture card via a USB cable, allowing the user to program the internal ADC registers. When the user interacts with the software (for example, by updating the registers), the user’s commands are passed to the MCP37D11-200 device via the data capture card. Once the commands are executed by the evaluation board, the software receives the requested data from the data capture card. The software will then analyze the data, perform a FFT or other analysis, and display the results. Refer to Figure 1-1 for a diagram of the system setup. Figure 1-4 shows a screen shot of the graphical interface.

MICROCHIP-MCP37X1X-200-12--200-Msps-ADC-VTLA-Evaluation-Kit-
FIG-4 The Pipeline ADC Utility software is available for download on Microchip’s website. For instructions on using the GUI, refer to the software’s supporting documentation included with the installation file, as well as within the application Help menu.

MCP37X1X-200 12-BIT 200 MSPS ADC VTLA EVALUATION KIT REQUIREMENTS

The evaluation kit requires the following:

MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Board (ADM00619)
MCP37XXX High-Speed Pipeline ADC Data Capture Card (ADM00506)
- Sold separately
Two 5V Power Supplies
- Included with the evaluation board and data capture card
USB-A to USB Mini-B Cable
- Included with the data capture card
External Clock Source or Crystal Oscillator
- Supplied by the user
External Signal Input
- Supplied by the user
Pipeline ADC Utility Software
- Available on the Microchip website

Installation and Operation

MCP37X1X-200 12-BIT 200 MSPS ADC VTLA EVALUATION KIT FEATURES
This MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Kit is a fully assembled, programmed and tested solution (with the exception of a clock source) to evaluate and demonstrate the MCP37X1X-200 operating performance.

The evaluation kit has the following features:

Programmable Full-Scale Analog Input Range
Dynamic Performance Monitoring
Evaluation of Performance Metrics, such as: SNR, SFDR, INL, DNL, etc.
User-Programmable Registers
Real-Time Monitoring of Power Consumption
Digital Post Processing Options: Decimation Filter, Digital Down-Conversion, CW Beamforming, Noise-Shaping Requantizer, etc.
Ability to Save and Load Software Configurations
Ability to Save and Load Raw Data for User Post-Processing

The evaluation kit features a sample rate of up to 200 Msps. Since the device can support up to eight input channels, the effective sample rate per channel is a function of the number of channels enabled. Refer to Table 2-1 for a detailed list of the input sample rate per channel.

For information about the device features, refer to the MCP37211-200/MCP37D11-200 Data Sheet – “200 Msps, 12-Bit Low-Power ADC with 8-Channel MUX”
(DS20005355).

TABLE 2-1: INPUT SAMPLE RATE VS. NUMBER OF CHANNELS SELECTED

No. of Channels Selected	Sample Rate per Channel (in Msps)
1	200
2	100
3	66.67
4	50
5	40
6	33.33
7	28.57
8	25

GETTING STARTED

Configuration Requirements
To power-up and run the evaluation kit, the following are required:

Pipeline ADC Utility Software
MCP37X1X-200 12-Bit 200 Msps ADC VTLA Evaluation Board (ADM00619)
MCP37XXX High-Speed Pipeline ADC Data Capture Card (ADM00506)
Two 5V Power Supplies
A USB-A to USB Mini-B Cable
External Clock Source or Crystal Oscillator (see Section 2.2.4.1 “Optimizing the Clock Connection”)
External Signal Input (see Section 2.2.4.2 “Optimizing the Analog Input Connection”)

Power Input Connection
This evaluation kit comes with two switching power supplies (Mean Well:
GS06U-1P1J): one for each of the boards. These power supplies can provide a 5V, 1A maximum output. They can be connected to an AC wall outlet rated between 90V AC and 264V AC, at a frequency of 47 Hz to 63 Hz. The other end of the power supply is a 2.1 mm barrel plug that connects to both the evaluation board and the data capture card (see Figure 2-1). If the user chooses to connect a different external power supply, a minimum output of 750 mA is required.

The evaluation board’s power supplies can also be supplied by external voltages directly to the power domains. This can be done by disabling the desired regulator using the dip switch SW2 – Regulator Enable on the silkscreen. Then, a DC voltage can be driven directly into the appropriate pin of header J16. Note that the even pins of the J16 header are GND.

The power domains on the evaluation board may be merged if needed. Specifically, the 1.2VA and 1.2VD power domains may be merged by populating a ferrite bead on FB10. Similarly, the 1.8VA and 1.8VD power domains may be merged by populating a ferrite bead on FB11. In both cases, the digital regulators should be disabled using the appropriate switches.

WARNING: Avoid connecting a power supply with a voltage greater than 5V. Doing so can damage the voltage regulators, requiring them to be replaced.

Evaluation Kit Set-Up

Connect the evaluation board and the data capture card as shown in Figure 2-1.
Power up both boards using the supplied 5V Power Supplies.
Ensure that a clock input is connected or that a crystal oscillator is installed correctly. Follow the instructions in section Section 2.2.4.1 “Optimizing the Clock Connection”.
- Note : If this is done correctly, the CAL DONE LED will be ON. Otherwise, the user should check the clock input or crystal oscillator for issues.
Connect the data capture card to a computer using the provided USB cable.
Press the Reset button on both boards.
Run the Pipeline ADC Utility Software.

For help with troubleshooting the boards and operating the GUI, please refer to the software’s supporting documentation.

WARNING: Avoid applying an input signal while the board is powered off. This may damage the input baluns! If a high second harmonic is seen, it is likely that these baluns need to be replaced.

MICROCHIP-MCP37X1X-200-12--200-Msps-ADC-VTLA-Evaluation-Kit-
FIG-5

Input/Output Optimization

OPTIMIZING THE CLOCK CONNECTION
The evaluation board does not come with a clock source for the device. The user must provide a clock source in order to run this evaluation board. The user has the following options:

Using Microchip’s 200 MHz Clock Source Evaluation Boards:
- Microchip’s ADM00725 or ADM00791 evaluation boards may be connected to the external clock SMA input (See Figure 2-1). These boards were developed as an optimized clock source for Microchip’s High-Speed ADCs. For more information, refer to the board web page.
Using a signal generator:
- A clean and low-jitter clock signal can be connected to the external clock SMA input. For the signal generation, Rohde & Schwarz® SMA100A or Agilent Technologies HP8644B signal generators can be used. To ensure that a clean and low-jitter clock signal is provided, the user should interpose a band-pass filter to reduce the harmonics coming from the signal source. A 200 MHz band-pass filter, such as KC4T-200M-10P-50-3A from TTE® Inc., is recommended. A high-jitter or unfiltered clock source will reduce achievable SNR at higher input frequencies.
Using a Crystal Oscillator on the board:
- An unpopulated footprint is available on the board where the user can place a crystal oscillator. For a single-ended clock, refer to the instructions in Example
- For a differential clock, refer to the instructions in Example 2. The user may also choose to place another type of clock as well. Note that the component values given below are for example only and may vary depending on the exact clock source used.

Example 1
A clock oscillator with a single-ended output may be populated on Y2. The use of a Microchip oscillator is recommended, such as the MXT573ABC200M000 for a 200 MHz clock. In this case, proceed to make the following modifications:

Remove R36
Populate R89 with a 499 resistor
Populate C106 with a 15 pF capacitor.

Example 2
A clock oscillator with a differential LVPECL output may be populated on Y2. The use of a Microchip oscillator is recommended, such as the MXT575ABA200M000 for a 200 MHz clock. In this case, proceed to make the following modifications:

Remove R36 and R136
Populate R89 and R90 with a 210 resistor
Populate C105 and C106 with a 22 pF capacitor.

OPTIMIZING THE ANALOG INPUT CONNECTION
The best way to evaluate the MCP37X1X-200 device is to use a clean analog input signal with as little noise as possible. The signal can be provided using a signal generator, such as Rohde & Schwarz SMA100A or Agilent Technologies HP8644B, and can be used along with a bandpass filter. The filter will help with filtering the harmonic tones of the fundamental, as well as with reducing the phase noise of the source. Two such filters that can be used are:

KC4T-70M-15P-50-69A, TTE Inc.’s 70 MHz filter
KC4T-20M-15P-50-69A, TTE Inc.’s 20 MHz filter

Note: If one of the analog inputs appears to not work properly, exhibiting issues such as a high 2nd harmonic or substantially lower fundamental power, the baluns on that input network are likely damaged. Replacing them should resolve these issues.

OUTPUT DATA CONFIGURATION
The MCP37X1X-200 device can provide both LVDS and CMOS outputs. However, this evaluation kit is designed for LVDS outputs only. The user can modify various other output data properties using the GUI, except the LVDS/CMOS output mode.

Appendix A. Schematics and Layouts

NOTICE TO CUSTOMERS
Refer to the board’s web page for the complete Schematics and Layouts.

Appendix B. Bill of Materials (BOM)

NOTICE TO CUSTOMERS
Refer to the board’s web page for the complete Bill of Materials.

FAQ

Q: What is the maximum sampling rate of the MCP37X1X-200 ADC?
- A: The MCP37X1X-200 ADC has a maximum sampling rate of 200 Msps.
Q: Can I use the evaluation kit with a Mac computer?
- A: No, the evaluation kit is compatible with Windows operating system only.
Q: Is the MCP37XXX Data Capture Card included in the evaluation kit?
- A: No, the MCP37XXX Data Capture Card is an optional accessory and needs to be purchased separately.