wansview W5 1080p Wireless Outdoor Cloud IP Camera Installation Guide

June 6, 2024
Wansview

W5 1080p Wireless Outdoor Cloud IP Camera
Installation Guide

wansview W5 1080p Wireless Outdoor Cloud IP Camera

We keep improving the app. If the app interface is not in accordance with the instructions, please go to the want view website: https://www.wansview.com for the latest instructions.

quick installation guide × l
camera. × l
power adapter × L
mounting accessories. × I
WiFi antenna.× l

Model W4/W5/W6

wansview W5 1080p Wireless Outdoor Cloud IP Camera - 1

INDICATOR LIGHTS STATUS

Light Status Camera Status
Yellow light on The camera is powered on

Yellow and green light
alternately flashing| Waiting to connect
Greenlight flashing| The camera is connecting to Wi-Fi
Greenlight solid| Succeed in connecting to Wi-Fi
Yellow light quickly flashing| 1. Reset camera to factory setting
2. Camera is upgrading firmware

Warm note: Please make sure your routers connected to the internet

EASY SETUP

Step 1 Download

Go to the App Store or Google Play to search and download the “Wansview Cloud’ app to your supported devices.

Or scan the OR code on the right to download Wansview Cloud to your Apple or Android device

Step 2 Account Register

  1. Open the Wansview Cloud app, then select Sign up

  2. Enter your email address

  3. Create a password at least 8 characters long. Your password must include three of the following:
    · At least one uppercase letter.
    · At least one lowercase letter.
    · At least one number.
    wansview W5 1080p Wireless Outdoor Cloud IP Camera - account register
2

  4. You will receive an email with your Verification Code. Input the Verification Code
    wansview W5 1080p Wireless Outdoor Cloud IP Camera - account register
3

  5. Go back to log into your account after the account registration is successful

wansview W5 1080p Wireless Outdoor Cloud IP Camera - account register
4

Step 3 Power on the camera and Install WiFi Antenna

wansview W5 1080p Wireless Outdoor Cloud IP Camera - wifi
antenna

(Setup process for w4/w5/W6is the same. Here we take the setup process for W4 as an example.)
Power on the camera with the supplied power cord and put the camera near the router.
Install the antenna by rotating the screw clock­ wise like the picture.

Step 4 Connect to a network

wansview W5 1080p Wireless Outdoor Cloud IP Camera -
connected

(Setup process for W4/W5/W6is the same. Here we take the setup process for WA as an example.) Connect your phone to 24GW-Fit5G is not supported. Open the Wansview Cloud app. Please tap [Add a device] or the “+” button on the upper- right corner of the screen and choose your camera model WA),

Please select “Wi-Fi connection by QR code”

wansview W5 1080p Wireless Outdoor Cloud IP Camera - qr code
1

If you see the yellow and green lights flashing on the RJ45 cable, please tap [Flashing]. If there is no green light, please check “Not Flashing”

wansview W5 1080p Wireless Outdoor Cloud IP Camera
-Flashing

You’ II see your Wi-Fi name. Input the correct Wi-Fi password and tap [Next]. The app will show a QR code. Please put the phone in front of the camera about 3-8 inches (8-12cm). Then, tap [Next] if you see the green light flashing quickly.

wansview W5 1080p Wireless Outdoor Cloud IP Camera - see your Wi-
Fi

During connection, the green light will flash quick­ ly. Once it’s connected, the green light will flash slowly. when you hear “The pairing IS Successful you can start using the camera now”, the app will switch to a page where you can change the camera name. Now you can enjoy the video from the camera!

wansview W5 1080p Wireless Outdoor Cloud IP Camera
-pairing

FAQ

The camera can not connect to Wi-Fi?%
Please press the reset button on the camera for seconds until the yellow light flashes quickly and the camera says reset is successful” Please wait for about one minute, then the camera will flash green and yellow light alternately and you can reconnect it now.

wansview W5 1080p Wireless Outdoor Cloud IP Camera -
connect

Share the camera to other people.
Tap “members-Invite new member” .Press at to send a link to your family member.
The shared member should open the link with the browser and tap “Receive” . Open the Wansview Cloud app and tap “Confirm” The family member can use the camera now. (The shared member should download Wansview Cloud app and register an account if he/she is a new user)  ****

LET US KNOW WHAT YOU THINK

Thank you so much for your order and trust to Wans­ view. Please feel free to contact us if you have any questions about the product application.
As a young and growing company, it would mean the world to us if you could leave an honest review about our product and services.

US/CA: service2@wansview.com
UK:service3@wansview.com
US/CA:service2@wansview.com
UK:service3@wansview.com
TEL: +13236863288
Available time: 6 pm-3 am (PST Time) from Monday to Friday
Online chat: Chat on Wansview Cloud app: Me-Contact Us-Online Customer Service
Facebook: https://www.facebook.com/WansviewOfficial
Youtube: https://www.youtube.com/WansviewOfficial

The instruction is for reference only. Slight differences may be found in the user interface.
All the designs and software here are subject to change with­ out prior written notice. For the latest instructions, please go to www.wansview.com to download.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals