Consciot CL28002 SW001 Solar Pathway Lights Outdoor User Manual
- June 16, 2024
- Consciot
Table of Contents
Consciot CL28002 SW001 Solar Pathway Lights Outdoor User Manual
SPECIFICATION
| LED | 12 LEDs |
|---|---|
| Location Type | Wet location |
| Working temperature | -10-40°C |
| Housing material | ABS |
| Induction mode | Light control |
INTRODUCTION
The solar landscape lights can automatically detect the changes in the
brightness of the external environment. When the brightness is low enough, it
will automatically switch from energy-saving mode to lighting mode without
motion detection (Auto on at night / Auto off at sunrise).
PACKAGE CONTENTS
-
A Lamp body
-
B Plastic Rod1
-
C Plastic Rod2
-
D Plastic Spike
-
E User Manual
*Note: If 4 Pack, content A-D will double.
INSTALLATION
Press the button and select a desired mode. Then choose a place that can get enough sunshine to install the light, the more sunshine it gets, the longer it can illuminate.
-
Take out the lamp body, connect the rods and spike in different combinations based on the height you need, adjust the angle of lamp holder and solar panel.
-
Insert the assembled light into the ground vertically.
OPERATION
The default mode of the product is OFF mode. Press the button to adjust modes when using the light.
3 LIGHTING MODES
LOW Light
Mode Press the power button for once, the landscape light will charge but not
light up in the day. It will automatically light up in darkness or at night.
Max working time: 24 hours consecutive lighting.
Medium Light Mode
On the basis of Low Light Mode, press the power button again, the landscape
light will charge but not light up in the day. It will automatically light up
in darkness or at night. Max working time: 12 hours consecutive lighting.
High Light Mode
On the basis of Medium Light Mode, press the power button again, the landscape
light will charge but not light up in the day. It will automatically light up
in darkness or at night. Max working time: 6 hours consecutive lighting.
OFF:
On the basis of High Light Mode, press the power button again, the landscape
light will power off.
WARM TIPS
- It is recommended to turn off the light and charge it under direct sunlight for 1-2 days before the first use. Make sure the product has enough power.
- During the installation, please make sure the landscape light is installed under direct sunlight where there is no shade or eave to shelter the solar panel. Otherwise, the lighting time will be shorter.
- Whether the solar landscape lights can produce the best lighting effect or not depends on sunlight intensity, geographical location, weather conditions, seasons and other conditions.
TROUBLE SHOOTING
If the light failed to turn on, please.
a) check if there is any light source around;
b) charge the light for a while and then cover the solar panel to have a
test;
c) make sure you hear a clear “click” sound when you press the
button.
Our goal is to bring you the best shopping experience on Amazon. If you have any questions about our product, please feel free to contact us. Our customer service is right here to resolve the case.
+1 866-698-6211(PST 9:00am-5:00pm,
Monday to Friday)
[email protected]
https://www.consciot.com
Why not share your stories to help other buyers?
Made in China
Documents / Resources
|
Consciot CL28002 SW001 Solar Pathway Lights
Outdoor
[pdf] User Manual
CL28002-SW001 Solar Pathway Lights Outdoor, CL28002-SW001, Solar Pathway
Lights Outdoor, Pathway Lights Outdoor, Lights Outdoor, Outdoor
---|---