Axess Epbt103-Bl TWS Wireless Headphone Complete Features
- June 4, 2024
- Axess
Table of Contents
Axess Epbt103-Bl TWS Wireless Headphone
Specifications
- BRAND: Axess
- MODEL NAME: AXESS True Wireless Headphones with Built-in Rechargeable Battery, Blue
- COLOR: Blue
- FORM FACTOR: In-Ear
- CONNECTIVITY TECHNOLOGY: Bluetooth 4.2
- BLUETOOTH: 4.2
- RUN TIME: 4 hour
- SPEAKER POWER: 5Mw
- PRODUCT DIMENSIONS: 1 x 1.5 x 0.25 inches
- ITEM WEIGHT: 1.6 ounces
- BATTERIES: 1 Lithium Ion batter
- BLUETOOTH OPERATING RANGE: 5-10m
Introduction
The EPBT103 wireless Bluetooth earphones are another example of how Axess combines fashion, inventiveness, and usability. You’ll be able to instantly connect to any Bluetooth device and listen to your music wherever you go with no hassle. Furthermore, as these earphones are actually wire-free, there is no need to deal with the typical tangled mess that comes with other “wireless” models. Because the EPBT103 earphones contain a built-in rechargeable 50mAh battery, you may enjoy uninterrupted audio entertainment for up to 4 hours. Make hands-free calls and connect to Bluetooth devices with the function button on the left earpiece. Additionally, this single button controls music playback, pause, and skip.
EPBT103 is praised for its excellent usability and sleek design. Wearing these earphones will allow you to enjoy your music and feel secure. Wear these earphones around the house or outside for an enjoyable workout as long as you stay within the 5 to 10 m Bluetooth operating range.
HOW TO SETUP
- STEP 1: Remove the charging case from one side of the TWS earphone.
- STEP 2: Press and hold the multipurpose button until the LED light begins to alternately flash red and blue.
- STEP 3: On your first mobile phone, enable Bluetooth. Step 4: From the Bluetooth list, choose “TWS.”
HOW TO USE
In your phone’s Bluetooth settings, turn on your headphones and look for new devices. Pair with the appropriate earbuds (they should have “TaoTronics SoundLiberty 53” on them, for example). You’re online and prepared to enjoy some music! The following time you turn on your earbuds, your phone will pair itself.
HOW TO PAIR
- Place the earbuds inside the charging case once again for initial activation, and then close it to finish charging.
- Open the charging case. The earphones will turn on and enter pairing mode automatically.
- Select “on. TWS In-Ear” to connect to your device.
HOW TO RESET
Take out the earphones from the case, then turn them off by pressing the buttons for a short period of time. Hold down the buttons on both earbuds for around 5 seconds starting with the earbuds in the OFF position. Approximately 5 seconds after turning white, the LEDs will switch off. Your earbuds will reset as a result.
Frequently Asked Questions
The TWS button is what?
You may enjoy full stereo sound quality without the necessity of cables or wires thanks to a special Bluetooth function known as True Wireless Stereo (TWS). This is how TWS operates: You connect your favorite Bluetooth music source to a primary Bluetooth speaker.
How do TWS earbuds turn on?
To turn on each earphone, press and hold the power/pairing button for up to 2-3 seconds. A voice prompt saying “Power On” will be audible.
Why won’t my left earbud work?
So make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well. By selecting Balance under Levels after clicking the Sounds icon on your PC, you can verify this.
My earbuds won’t turn on; why?
If the headphones’ power won’t turn on, the battery might not be installed properly or could need to be changed. To fix this problem, make sure you look through the following things. Important: Consult the product’s instructions if you require model-specific details to accomplish any of the tasks.
Why won’t my headphones and phone pair?
If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.
Why can’t Bluetooth locate devices?
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
What does Bluetooth TWS stand for?
Wireless earbuds have developed into a very compact size and cordless form factor thanks to the advancement of Bluetooth® technology, which we refer to as True Wireless Stereo (TWS).
How can I turn my earbuds’ volume up?
Go to settings on your Android device and choose the sound option. The different sound settings will be visible. To change the media setting, click on it and make the necessary adjustments. You can do this while listening to music because it will direct you to the right settings.
Without a case, how do TWS earbuds get charged?
You must connect a Micro USB cable to your device and either a computer or a USB adapter in order to charge earbuds with a micro USB. After that, you must wait while your earbuds fully charge.
Why won’t my Bluetooth switch turn on?
Open System Settings from the HOME menu on the Nintendo Switch. Select your device’s name from the list of stored devices after scrolling down to Bluetooth Audio. Choosing Connect Device. Any audio played after you connect will be played back through your Bluetooth device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>