AXESS PABT6040 12 Inch Portable LED Trolly Speaker with 1.5 Inch Tweeter Instruction Manual

PABT6040
12″ Portable LED
Trolley Speaker with 1.5″ Tweeter

For correctly operating, please read this manual carefully before using it. Any content revision of the manual won’t declare again, and we are not responsible for consequences caused by fault or oversight of this manual.

TO CUSTOMERS
Thank you for your support and trust in purchasing the products of our company. To fully exert the function of the product, we suggest you to read the operating instruction carefully before using it, for the convenience of grasping the connection method and using points. Please take care of the operating instruction after reading it for the purpose of further reference.

SPECIFICATIONS

12° Bluetooth Trolley LED Speaker
1.5″ Tweeter
10M Bluetooth range
Brilliant LED lights
TF card slot, AUX, and USB input
FM Radio function
Microphone input
Wireless microphone Included
Echo/Bass Adjustments
400W (PMPO) Output power
7.4V/3600mAh battery capacity
9V/1.5A Charge
Small remote control included
Frequency Response: 50Hz-20kHz

REMOTE CONTROL FUNCTION

1. Power Switch: Press this switch to turn it on and off the speaker
2. Mode Selector: Press this button to switch between USB, TF, FM, and Bluetooth inputs
3. Repeat Track: tap this button to single tuen repeat
4. EQ mode switching
5. Previous FM Station (CI-1-): When using the speaker in FM mode, press this button to get to the previously stored FM station
6. Next FM Station (CH+); When using the speaker in FM mode press this button to go to the next stored FM station
7. Previous Track: when using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track.
8. Next Track: when using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track.
9. Pause & FM scan: Press this button to pause the signal from the USB drive TF Card or Bluetooth inputs. When using the speaker in FM mode, press this button to auto scan for all available stations.
10. VOLUME –
11. VOLUME +
12. Number buttons (0-9)

REAR PANEL FUNCTION LAYOUT

1. LED Lights Power Button: Press this button to turn on and off the front LEDs
2. Insert Microphone to the front panel MIC jack, adjust MIC Vol and Echo to best level
3. AUX input: Connect your smartphone, mp3 player, laptop, or another audio device to this input
4. Microphone Priority: when the microphone priority is activated, speaking into the MIC will automatically lower the other audio signal by 20db. When the two speakers are switched to bluetooth mode, press the TWS function button on any Axess device for 3-5 seconds to begin the TWS matching state, then the two speakers will be automatically paired and connected. When the is heard, the matching is successful, and the LED screen has a display prompt.
5. Mode Selector / Recording: Press this button to switch between USB, TF, and Bluetooth inputs. Press and hold for 3-5 seconds to begin recording onto the USB drive or TF card
6. Repeat Track: Tap this button to single tune repeat
7. Previous Track / Previous FM Station (CH-): When using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track. When using the speaker in FM mode, press this button to go to the previously stored FM station
8. USB Flash Drive Input: Insert your USB flash drive. The unit will only read mp3, way, WMA files from the USB flash drive. The maximum storage size of the USB flash drive cannot exceed 32GB. Do not attempt to connect a computer to the USB input as the speaker will not be able to connect to a computer.
9. Play/Pause & FM Scan: Press this button to pause the signal from the USB flash drive TF card or bluetooth inputs. When using the speaker in FM mode, press this button to auto scan for all available stations. Each station will be stored. Press the CH+ and Ch -to choose a station.
10. Next Track / Next FM Station (CH+): When using the speaker in USB / TF card & bluetooth mode, press this button to go to the next track. When using the speaker in FM mode, press this button to go to the next stored FM station.
11. USB/TF Display screen: the elapsed time and format will appear on this display screen for the USB/TF card inputs
12. TF input: Insert your TF card into this slot. The unit will only read mp3, way, wma files from the TF card flash drive cannot exceed 32GB
13. DC Charging Port: Insert the charging adapter into the DC9V input port on the rear of the unit. When the battery is charging this indicator will illuminate. When the battery is fully charged the indicator will turn off.
14. Power Switch: press this switch turn on and off the speaker. Before powering on the speaker make sure the volume levels are turned down to prevent damage to the amplifier or speakers
15. Main Volume Knob: use this knob to adjust the volume USB/TF/BTUFM music.
16. Treble Knob: Use this knob to adjust the treble levels.
17. Bass Knob: Use this knob to adjust the bass levels.
18. Microphone Volume Knob: Use this knob to adjust the microphone volume levels.
19. Microphone Echo Knob: Use this knob to adjust the microphone echo levels.

Prompt
When people sleep, they need a quiet environment. Please turn off music or turn off the power while sleeping.
This symbol indicates to user that the machine with risk of electric shock
This symbol indicates to user that the machine with important operation and maintenance instruction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>