Axess Speakers Bluetooth Wireless Portable — at Home, Car Speakers-Complete Features/User Guide

Axess Speakers Bluetooth Wireless Portable — at Home, Car Speakers

Specifications

• HORN SIZE: 2-inches
• SUBWOOFER SIZE: 3 inches
• HORN OUTPUT: 2W x 2, 4Ω
• SUBWOOFER OUTPUT: 5W, 4Ω
• BATTERY CAPACITY: 1000 mAh
• FREQUENCY RESPONSE: 100-20Khz

Introduction

Axess Bluetooth-enabled speaker makes device pairing quick and secure. It is a cordless Bluetooth speaker that is easy to use. It is a small Bluetooth speaker for use with a Bluetooth projector or phone, or as a laptop speaker.

It is the ideal Bluetooth party speaker or at-home speaker, Loud Sound has a 30-foot operational range. A large boom is provided by the bass in a little speaker. a soundbar and boombox-style Bluetooth speaker with strong bass. It connects easily. You have Bluetooth connections for MP3 players, smartphones, tablets, and more! has a built-in microphone. You can also use a USB speaker, an FM radio, or Bluetooth’s 3.5mm Line-In AUX to play music.

Take this compact speaker with you everywhere you go! In the automobile or while playing outside, listen to music and audio. There is an adjustable strap provided, so you may always have a portable outdoor speaker with you. For any event, a portable Bluetooth speaker.

FEATURES

1. 1 Outdoor Passive Bluetooth Speaker with 3-inch Subwoofer.
2. Output has very clear sound and heavy bass, as well as a dynamic sound
3. With A2DP Bluetooth , wirelessly stream music from any Bluetooth-enabled device such as your mobile phone, notebook, iPhone or iPad.
4. Secure simple pairing for user-friendly
5. 10-meter operating
6. With USB and SD card
7. With FM
8. With Line-in function, suitable for PC, MID, TV, and other audio
9. Side panel control for
10. Built-in Lithium rechargeable battery (1000 mAh).
11. With strap for easy

Product Overview

1. Charging jack 2. Aux-in jack 3. ON/OFF button
2. Forward 5. PLAY/PAUSE 6. Backward
3. USB port 8. Volume Gear 9. LED indicator
4. SD slot 11. Mode ( Bluetooth switch, USB, SD, FM, and AUX-IN modes)

Bluetooth

1. Turn the ON/OFF button to “ON”. The LED light will turn blue, flash quickly, and beep twice.
2. Activate the Bluetooth of your mobile device and search for the device name “BT speaker”, and then connect it. The blue LED light will flash slowly and beep three times once connected successfully.
3. Play the music from your mobile device and
4. Press the LAST or NEXT button on your mobile device to select
5. Press the PLAY/PAUSE button on your mobile device to play or
6. Use the “Volume Gear” to adjust the volume up and down. Or adjust the volume via your mobile device.

Playing music from a USB disk & SD card

1. Turn the ON/OFF button to “ON”.
2. Insert the SD card or USB device into The music stored will be played automatically, and the blue LED light will continuously flash.
3. In the PLAY mode, tap the FORWARD or BACKWARD button to select songs you like; hold down the FORWARD or BACKWARD button to fast forward or backtrack the
4. Press the PLAY/PAUSE button to play or
5. Please turn the ON/OFF button to “OFF” when the speaker is not in

Note
In Bluetooth PLAY mode, inserting an SD card or USB device will automatically disconnect the Bluetooth and switch to the USB device or SD card. You can press the MODE button to switch back to Bluetooth mode.

FM Radio

1. In FM radio mode, the audio cable provided serves as a Please insert the audio cable to get the best FM radio signal before use.
2. Turn the ON / OFF button to “ON” and press the “MODE” button to switch to FM radio mode.
3. In PLAY mode, tap the “PLAY/PAUSE” button to auto-search the FM stations and store them automatically.
4. Press the LAST or NEXT buttons to change the stored FM

AUX-IN

For all other compatible external music devices or MP3/MP4 players: Please use the supplied audio line cable to connect from your external device’s “LINE OUT” jack to the “AUX IN” jack of this device. Then press the “MODE” button to switch to the AUX-IN state. Enjoy!

When using an external device, all functions will be controlled by the external device except for the “PLAY/PAUSE” button.

Notes

1. Press the MODE button to toggle between different modes: Bluetooth , SD, USB, FM radio, and AUX-IN.
2. Turn the ON/OFF button to “OFF”, to shut off the power supply while not in

Charging Instructions

1. Power off the unit, and put the provided charge cable into the charging slot Connect the other end to a PC or other charger with 5V output (not included). Once connected properly, the red charging indicator light should keep flashing.
2. Charge time is approximately 3-5 When fully charged, the red charging indicator light will switch off.
3. In order to prolong the life of the battery, please do not charge for more than 8 hours

Frequently Asked Questions

• What about Axess Speakers?
  The Axess SPBT1031 is a Bluetooth Speaker with a very specific purpose. The SPBT1031 won’t appeal to everyone, but it also won’t have a hard time finding a warm reaction from a broad audience. That’s because it’s a rather special kind of bass-focused Bluetooth speaker that was designed almost completely to deliver powerful bass.

• How is Bluetooth connected to Axess?
  The LED light will glow blue, twinkle swiftly, and beep twice when the power switch is turned to “ON.” 2. Turn on the Bluetooth on your smartphone, look for the device “SPBT1033,” and connect to it. When the connection is successful, the blue LED light will gently sparkle and beep three times.

• How can I activate pairing mode on my Axess speaker?
  When the power switch is turned to “ON,” the LED light turns blue, blinks twice, and beeps quickly. Turn on Bluetooth on your phone, look for a device with the name “Axess SPBT1056,” and connect it. Once the connection has been made successfully, a blue LED light will gently blink and beep three times.

• Why won’t my Axess speaker function?
  Make sure the device’s Bluetooth is turned on by checking. Then verify that both the speaker and the source device’s volume are turned on. There is a chance that Bluetooth on the speaker or source device is broken if Bluetooth settings are enabled and the volume is turned up.

• How can I charge my Bluetooth speaker from Axess?
  To use with the charger wire provided in the accessories, you will need to purchase a universal 5V charger. It’s recommended to purchase a 5V universal charger that can be used with any device.

• If the charging port is broken, can I charge a Bluetooth speaker using a USB port?
  Simply use your smartphone to charge the wireless speaker. Simply connect your smartphone to the device using the USB cable. You won’t need to worry about using a charger if you do it this way. You don’t need to buy anything more because you already carry a phone with you everywhere.

• Axess: What is it?
  Axess is a computer reservations system with headquarters in Japan that serves the Japanese market.

• What is the charging time for an Axess speaker?
  Turn the device off, insert the included charge cable into the charging port, then attach the other end to a computer or another charger that outputs 5V. It should take 2-4 hours to charge. When charging is complete, the indicator light turns off and the light is red.

• JBL Chargers: Are they all the same?
  Hi! The power adaptor for the JBL Charge 3 has the following specifications: 5V/2.3A. For your speaker, you can use any sort of charger. You should be okay to go as long as it is well inside the 5V/2.3A rating.

• What does WPC sound like?
  On the speaker’s backside, inside the cap, press the WPC (Wireless Party Chain) button. The WPC (Wireless Party Chain) and Bluetooth (BLUETOOTH) indicators flash. A beep is heard after about 6 seconds, and then the WPC (Wireless Party Chain) indicator turns on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>