Axess MPBT6508 Portable Bluetooth Media Player Speaker User Manual

Axess MPBT6508 Portable Bluetooth Media Player Speaker

Product Description

This media player Bluetooth speaker includes a handy top handle that makes it simple to carry it anyplace. Its lighter weight and relatively smaller size make it easier to move. So simply grab it and head to the party. This device has USB, microSD, FM radio, and Bluetooth speaker capabilities. The noisy street blaster has a 3.5mm aux input. comes with a wireless microphone and two mic inputs. Speaker is compatible with your preferred gadgets. The speakers of the axess mpbt6508 bluetooth media player are well-built, long-lasting, and overall produce a deep sound that can handle both high and low volume levels. dazzling, classy, and sophisticated style with a black body.

For simple equalizer audio configuration, the speaker incorporates a front panel button control center. The pre-sets on an equalizer are designed to increase the highs and lows of the frequencies in any style of music. All-day music playback at a moderate volume is possible thanks to the built-in 3.7v/5400 mAh battery. 5 hours to reach 100% capacity. PMPO with a 300 watt output and a 5 volt charging input. The strong 5400 mAh battery can play music continuously for 5 hours. Battery-powered power source.

SAFETY INSTRUCTIONS

1. When using electrical units , basic safety precautions should always be followed.
2. Children aged from 8 years and people with reduced physical , sensory or mental capabilities or lack of experience and knowledge can use this unit , only if they have been given supervision or instruction concerning use of the unit in a safe way and understand the hazards involved .
3. Children should be supervised to ensure that they do not play with unit .
4. Unless they are older than 8 and supervised , children should not perform cleaning or user maintenance .
5. This unit is not a toy .
6. This unit contains no user serviceable parts , if the unit and any of its accessories are malfunctioning or it has been dropped or damaged , only a qualified electrician should carry out repairs , improper repairs may place the user at risk of harm .
7. Keep the unit out of reach of children .
8. Keep the unit away from heat or sharp edges that could cause damage .
9. Keep the unit away from heat sources , direct sunlight , humidity , water and any other liquid .
10. Keep the unit free from dust, lint, etc. .
11. Do not immerse the unit in water or any other liquid .
12. Do not operate the unit if it has been expose to water , moisture or any other liquid to prevent against electric shock , explosion and / or injury to yourself and damage to the unit .
13. Do not use the unit for anything other than its intended use .
14. Do not store the unit in direct sunlight or in high humidity conditions .
15. Do not put objects into any of the openings .
16. Do not play music at excessive volume levels as damage to hearing and / or the equipment may occur . It is imperative to unplug the adaptor after the unit has been used , before it is cleaned and whilst being repaired .
17. To prevent possible hearing damage , do not listen at high volume levels for long periods of time.
18. Warning: Keep the unit away from flammable materials .

SPECIFICATIONS

• Double 4” Bluetooth Media Player Speaker V5.0 Bluetooth
• Standard/Outdoor Equalizer Brilliant LED Light
• USB, TF Card, AUX inputs and FM radio function 2 Microphone Inputs
• 300 Watt PMPO Output Power DC5V/1A Power Supply Charging Time: 5 hours Playtime: 4-6 hours
• FM FREQUENCY RANGE: 87.5-108 MHz
• FREQUENCY RESPONSE: 80Hz – 20KHz
• RECHARGEABLE BATTERY: Lithium 3.7V 5400mAh
• PRODUCT SIZE: W545H266D194 mm

PACKAGE INCLUDES

• USB charging cable
• 3.5mm AUX cable
• Remote Control
• Wireless Microphone
• Strap
• Instructional Manual

INSTRUCTIONS FOR USE

BLUETOOTH OPERATION

1. Power on the speaker.
2. The speaker will default into Bluetooth mode when first turned on.
3. Turn on the Bluetooth setting of your device and search the pairing name “MPBT6508”.
4. Music is ready to play after being paired.
5. Long pressing the “ Play/Pause ” button to disconnect the Bluetooth connection.

DESCRIPTION OF PARTS

1. Mode
2. Prev/VOL-
3. Play/Pause
4. Next/VOL+
5. Equalizer (Two Mode)
6. Radio Presets (0-4)
7. Radio Presets (5-9)
8. AUX IN
9. TF Card Slot
10. USB Card Slot
11. Microphone One Input
12. Microphone Two Input
13. DC 5V Charging Input
14. Power On/Off Switch

USB/TF OPERATION

1. Insert USB/TF, the speaker will play the music directly.
2. Press the “ Play/Pause ” button then pause or play the music.
3. During the playback, long pressing the “Next or Prev” buttons to adjust the volume.
4. Press the “0-9” button to play the song list.

Please don’t take out the USB/TF cards while playing, otherwise, USB/TF card will be damaged.

AUX IN OPERATION

1. Press “ Mode ” button to AUX-IN mode .
2. Insert AUX-IN cable and connect to your device to play music.

RADIO OPERATION

1. Press the “Mode” button to FM Radio mode.
2. Long pressing the “Play/Pause” button to run an auto scan and save available channels.
3. Press “Prev” or “Next” to change to the previous and next channel, or press the number button to locate the saved channels, for example, if you want to listen to saved channel 12, then press numbers “1” and “2”.
4. Press number to manual searching channels by frequency, for example, if you want to search channel frequency 97.1, then press number “0”, “9”, “7” and “1”, channel frequency 107.5, then press number “1”, “0”, “7” and “5”.

LED LIGHTING OPERATION

1. The speaker will be default into LED lighting when power on.
2. Long pressing “0” button to off the LED lighting.

HANDS-FREE OPERATION

1. Press “Play/Pause” button to answer the call .
2. Press “Play/Pause” button again to hang up the call.

RECORD OPERATION

1. Insert wired microphone or connect with wireless microphone
2. Insert a USB stick or TF card which is available with storage.
3. Long pressing the “ EQ ” button to enter into record mode, and start recording.
4. Press the “EQ” button again to exit record mode after finished recording.

PROMPT
When people sleep, they need a quiet environment. Please turn off the music or turn off the power while sleeping

NOTE
When speaker is not in use please turn off the device to conserve battery life. Make sure to turn down the volume when you turn off the device so you can maintain the speakers’ (sub)woofer in good condition. This way you are less like to burn out or damage the device.

FAQs

How can I operate my Bluetooth speaker from Axess?****

The LED light will glow blue, twinkle swiftly, and beep twice when the power switch is turned to “ON.” Turn on Bluetooth on your mobile device, look for the MPBT6508 device, and connect to it. When the connection is successful, the blue LED light will gently sparkle and beep three times.

What signs do an Axess speaker display when it is charging?****

It’s recommended to purchase a 5V universal charger that can be used with any device. An indicator light that indicates that the device is charging will turn on when these are connected properly and will remain on for the duration that the device is charging.

Why keeps beeping my Axess speaker?****

When the Axess speaker is unable to establish a Bluetooth connection, it makes an obnoxious beeping noise. By turning on Bluetooth on both devices and refreshing the pairing list, you can solve the connectivity problem. Additionally, both devices have volume controls that can be used to vary the volume.

Where can I find a charging port without one for my Bluetooth speaker?****

Simply use your smartphone to charge the wireless speaker. All you have to do is attach your smartphone to it using the USB cord. You won’t need to worry about using a charger if you do it this way. You don’t need to buy anything more because you already carry a phone with you everywhere.

When charging, can I use my Bluetooth speaker?****

It is completely safe to use your Bluetooth speaker while it is charging if your speaker has a built-in battery. It is not advised to use your Bluetooth speaker while it is charging if the battery is removable.

Can you use an AUX wire to charge a speaker?****

No, using an auxiliary cable to charge a Bluetooth speaker is not possible. The aux port does not charge your speaker; it is solely used for audio output. The AUX wire cannot charge your speaker since it cannot transfer power from one device to another. For that, you’ll need to use the charging port.

I can’t get my Axess speaker to turn on.****

Set the power switch to “ON.” When you insert a USB flash drive into the slot, the music that is saved will instantly start playing and a blue LED light will remain lit. Shortly touch the Forward or Backward button while the song is playing to choose songs you like, and long press to quickly forward or rewind the song. To play or pause, click PLAY/PAUSE.

Why can’t Bluetooth locate devices?****

The device’s own Bluetooth is typically either off or not in pairing mode when this happens. To find out how to activate pairing mode and make it discoverable, consult the user handbook. While some devices have a specific Bluetooth button, some headphones require you to keep the power button down longer.

Why won’t my phone pair with my Bluetooth speaker?****

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

Why does the Bluetooth signal on my speaker constantly coming back as busy?****

More electricity is needed for Bluetooth to function. The Bluetooth connections will either fail or the speaker will play a busy signal sound when your audio device or the speaker has low power.

What does a beep sound on my phone mean?****

It could be a notification from a newly downloaded app or from any app that is designed to remind you of anything. Try to delete a recently downloaded app, and as soon as you hear a beep, look to see whether any notifications are there or if an app is already operating.

Can USB be used to charge Bluetooth speakers?****

Using your laptop or desktop computer and a USB cable, charge your Bluetooth speaker. Combining a cable with a micro USB port and your laptop or desktop with a Bluetooth speaker is probably the best substitute for the Bluetooth speaker charger. That is as a result of this device’s superior strength compared to other items on our list.

The reason why my Bluetooth speaker won’t charge****

Installing software updates, replacing the battery, purchasing a new cable, repairing a fractured solder joint, replacing the charging port, and replacing the charging circuit are all necessary fixes for a Bluetooth speaker that won’t charge.

Are Bluetooth speakers rechargeable?****

Overall, adding wireless speakers to your home music system might be a terrific choice. The majority of speakers won’t be completely wireless and will require a power source to function. Even totally portable systems occasionally need to be recharged.

What happens if a Bluetooth speaker is overcharged?****

Modern batteries have sophisticated sensors that prevent overcharging, but this does not guarantee that leaving the battery hooked into the charger won’t harm it. One charging cycle is finished when a battery is fully charged; a battery can only be fully charged a certain number of times before it is irreparably harmed.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>