Taylor T-7020 Belt Sander Instructions
- June 16, 2024
- TAYLOR
Table of Contents
Taylor T-7020 Belt Sander Instructions
INTERNAL PARTS
USE 90 PSI MAXIMUM
| REF # | PART # | DESCRIPTION | QTY |
|---|---|---|---|
| 1 | 702001 | HOUSING | 1 |
| 2 | 702002 | GUARD BODY | 1 |
| 3 | 702003 | AIR INLET | 1 |
| 4 | 702004 | LEVER | 1 |
| 5 | 702005 | VALVE STEM | 1 |
| 6 | 702006 | REGULATOR | 1 |
| 7 | 702007 | O-RING | 1 |
| 8 | 702008 | SPRING | 1 |
| 9 | 702009 | O-RING | 1 |
| 10 | 702010 | SPACER | 1 |
| 11 | 702011 | RETAINING RING | 1 |
| 12 | 702012 | DISTANCE COLLAR | 1 |
| 13 | 702013 | BEARING | 1 |
| 14 | 702014 | REAR END PLATE | 1 |
| 15 | 702015N | ROTOR | 1 |
| 16 | 702016N | BLADE (4) | 1set |
| 17 | 702017 | KEY | 1 |
| 18 | 702018 | CYLINDER | 1 |
| 19 | 702019 | FRONT END PLATE | 1 |
| 20 | 702020 | BEARING | 1 |
| 21 | 702021 | CAP | 1 |
| 22 | 702022 | DRIVE PULLEY | 1 |
| 23 | 702023 | HEX NUT | 1 |
| 24 | 702024 | FLAT SHOW | 1 |
| 25 | 702025 | HEX SOCKET HEAD BOLT | 2 |
| 26 | 702026 | DUST COVER | 1 |
| 27 | 702027 | NIPPLE | 1 |
| 28 | 702028 | SPRING | 1 |
| 29 | 702029 | SILENCERSCREWLEVER SUPPORT SCREWSPRING WASHER HEX NUTCLAMP FINGER |
PAD WASHERSPRING WASHER SCREWSPRING ARM NUTIDLER PULLEY SHAFT BEARING SPACER
(LONG)RETAINING RING BOLTBOLTSPACER (SHORT) 100 GRIT BELT120 GRIT BELT4MM
WRENCH (NOT SHOWN)| 1
---|---|---|---
30| 702030| 1
31| 702031| 1
32| 702032| 2
33| 702033| 2
34| 702034| 1
35| 702035| 1
36| 702036| 1
37| 702037| 1
38| 702038| 2
39| 702039| 1
40| 702040| 1
41| 702041| 1
42| 702042| 1
43| 702043| 1
44| 702044| 1
45| 702045| 2
46| 702046| 1
47| 702047| 1
48| 702048| 1
49| 702049| 1
50| 702050| 1
51| T-7020100| 1
| T-7020120| 1
52| 702052| 1
505 N. Railroad Ave. 33435
P.O. Box 1117 33425
Boynton Beach, FL
FOR WARRANTY INFORMATION & WARRANTY REGISTRATION VISIT
www.taylorpneumatic.com
8/23 / ALL RIGHTS RESERVED / COPYRIGHT 2023
Ph. (561)732-1111
Fax. (561)731-4412
Toll Free 800-805-8665
