FONESTAR VULKAN-30 Horn Speaker User Guide
- May 15, 2024
- Fonestar
Table of Contents
FONESTAR VULKAN-30 Horn Speaker
Product Information
Specifications:
- Output: 30W RMS
- Speakers: 1 compression driver
- Response: 400-6,000 Hz (-10 dB)
- Impedance: 8 ohms
- Sensitivity: 105 dB @ 1 W/1 m
- Maximum Sound Pressure: 118 dB @ 15 W/1 m
- Coverage Angle: N/A
- Protections: IP-66 according to EN 60529
- Material: ABS diffuser and back cover
- Connection: 30 cm cable with stripped ends
- Temperature Range: N/A
- Dimensions: 285 x 205 x 280 mm (depth)
Product Usage Instructions
Installation:
- Place the horn speaker in a suitable outdoor or marine environment.
- Ensure proper power, impedance, and frequency limits are adhered to for optimal performance.
- Connect the speaker using the provided cable with stripped ends.
- Refer to the manual for detailed installation guidelines.
Operation:
- Power on the amplifier within the specified power range.
- Adjust the volume based on the desired sound level.
- Ensure the speaker is aimed in the desired direction for optimal sound coverage.
- Monitor the temperature range to prevent overheating.
Maintenance:
- Regularly clean the speaker to remove dust and debris.
- Check for any signs of damage or wear and tear.
- Ensure all connections are secure and free from corrosion.
- Store the speaker in a dry place when not in use to extend its lifespan.
Frequently Asked Questions
Q: Can the horn speaker be used indoors?
A: The horn speaker is designed for outdoor and marine environments but can be used indoors if needed.
Q: What is the IP rating of the speaker?
A: The speaker has an IP-66 rating, indicating protection against dust and water ingress.
Q: How should I aim the speaker for optimal performance?
A: Aim the speaker in the direction where sound coverage is required, ensuring obstacles do not obstruct the sound path.
DESCRIPTION
- The horn speakers of the VULKAN series are suitable for reproducing the frequency range of speech and sending messages over long distances
- Specially constructed with materials that are highly resistant to adverse weather conditions, and a design that gives them an IP-66 degree of protection against the ingress of dust and water. Suitable for outdoor and marine environments
- For public address applications in open spaces, industrial facilities, sports facilities, car parks, etc.
IMPORTANT
For proper functioning and performance, use appropriate power, impedance and frequency limits. Before connecting to other equipment, take into account the necessary conditions for a LOW IMPEDANCE installation. Further information can be found at: fonestar.com/downloads/install_fonestar_en.pdf
CONNECTION EXAMPLES
INSTALLATION
TECHNICAL SPECIFICATIONS
-
POWER: 30 W RMS
-
SPEAKERS: 1 compression driver
-
RESPONSE: 400-6,000 Hz (-10 dB)
-
IMPEDANCE: 8 Ω
-
SENSITIVITY: 105 dB@1 W/1 m
MAXIMUN SOUND -
PRESSURE: 118 dB@15 W/1 m
-
COVERAGE ANGLE: H/V: 140º/140º@500Hz, 120º/120º@1kHz, 60º/60º@2kHz, 40º/40º@4kHz (-6 dB)
-
PROTECTIONS: IP-66 in compliance with EN 60529
-
MATERIAL: ABS diffuser and rear cover Aluminium mount A2 stainless steel screws
-
CONNECTION: 30 cm cable with stripped ends
-
TEMPERATURE RANGE : Operation: -25ºC ~ +55ºC
-
Storage: -40ºC ~ +70ºC
-
MEDIDAS: 285 x 205 x 280 mm depth