gosund SLS2 1 Way Wi-Fi Smart Light Switch User Manual
- June 16, 2024
- gosund
Table of Contents
gosund SLS2 1 Way Wi-Fi Smart Light Switch
Specifications
- WIFI Standard: IEEE 802.11 b/g/n 2.4GHz
- Working voltage: AC 110-240VAC 50/60Hz
- Load power: 500W/Gang
- Maximum load current: 10A
- Power consumption: 0.5W
- Working temperature: 0~40
- Dimensions: 86x86x35mm
Product Information
The WIFI Smart Light Switch is a 1 or 2-Gang 1-Way switch that can be controlled using an iOS or Android phone. It supports theGosund APP and voice control through compatibility with Alexa, Google Home, Tmall Genie, or Xiaodu speakers. The switch also features timing function for automatic on/off, overload protection for easy replacement of traditional mechanical switches (requires neutral wire), smart scene capabilities, and device grouping.
Usage Instructions
Installation
Note: Ensure the power on the circuit breaker is turned off before wiring. If you have no wiring experience, please call a professional electrician.
Step 1: Opening the Switch Glass Panel
Use a flat screwdriver to pry out the slots on the top, bottom, left, and right sides of the switch bottom shell to open it.
Step 2: Wiring Methods
Method 1: Neutral Wire Required
- The Live wire is connected to the L terminal.
- The Neutral wire is connected to the N terminal.
- The Lighting wire is connected to L1, L2, or L3 terminals.
Method 2: No Neutral Wire Required (Capacitor Required)
- The Live wire is connected to the L terminal.
- The Lighting wire is connected to L1, L2, or L3 terminals.
- If using a 1-Gang switch, the L1 lamp needs to be connected to a capacitor.
- If using a 2-Gang switch, the L1 lamp needs to be connected to a capacitor.
Note: The wire colors indicated in this manual are the usual colors and may vary in some houses. Make sure the wire conductors are securely attached to each wire. Ensure that the Wi-Fi signal is stable and working properly before wiring.
Step 3: Installing the Switch
Install the switch using the provided screws and snap the wall plate onto it.
Step 4: Powering On
Turn the power back on at the circuit breaker, then turn on the lights.
FAQ
Q: Can the WIFI Smart Light Switch be controlled by both iOS and Android devices?
A: Yes, the switch can be controlled by both iOS and Android phones using the Gosund APP.
Q: Is a neutral wire required for installation?
A: For Wiring Method 1, a neutral wire is required. However, for Wiring Method 2, no neutral wire is required but a capacitor is needed.
Q: How many Gangs does the switch support?
A: The switch supports both 1-Gang and 2-Gang configurations.
Q: Can the switch be voice-controlled?
A: Yes, the switch is compatible with Alexa, Google Home, Tmall Genie, and Xiaodu speakers for voice control.
Q: Does the switch have overload protection?
A: Yes, the switch has overload protection for easy replacement of traditional mechanical switches.
Q: Is professional help recommended for installation?
A: If you are unsure or have no wiring experience, it is recommended to call a professional electrician for assistance.
Q: What is the working voltage and temperature range of the switch?
A: The switch has a working voltage of AC 110-240VAC 50/60Hz and a working temperature range of 0~40 degrees Celsius.
Features
- Can be controlled by iOS phone/Android phone
- Support “Gosund” APP
- Voice control: Compatible with Alexa and Google home Tmall Genie or Xiaodu speakers
- Timing function: Auto on/off with timing function
- Overload protection for easy replacement of your traditional mechanical switches (needs neutral)
- Smart scene
- Device group
Security Information
Risk of electric shock: Electricity can cause personal injury and property damage if not handled properly. If you are unsure of any part of these instructions, seek professional help from a qualified electrician.
Product Information
- WIFI Standard: IEEE 802.11 b/g/n 2.4GHz
- Working voltage: AC 110-240VAC 50/60Hz
- Load power: 500W/Gang
- Maximum load current: 10A
- Power consumption: ≤0.5W
- Working temperature: 0℃~40℃
- Dimensions: 86x86x35mm
Install
How to open the switch glass panel
Use a flat screwdriver to pry out the slots on the top and bottom (as well as left and right) of the switch bottom shell to open it
Notice:
- Make sure the power on the circuit breaker is turned off before wiring.
- Two wiring methods:
- Wiring method 1: neutral wire needs to be connected
- Wiring method 2: No need to connect the neutral wire (capacitor required)
- The wire colors indicated in this manual are the usual colors and may vary in some houses.
- Make sure the wire conductors are securely attached to each wire.
- Make sure the Wi-Fi signal is stable and working properly before wiring.
- If you do not have any wiring experience, please call a professional electrician.
First step:
- Turn off the circuit breaker and test the power with an electrical tester.
- Make sure the switch is off before wiring.
Second step
- Remove existing wall panels; turn on power at breaker and use electrical tester to check which wire is the line; the tester will flash or beep when near the line
- Turn off the power at the circuit breaker, if there is a power outage, use an electrical tester, pull the existing witch out; mark the wiring and other wires; disconnect the power with pliers and remove the wires from the existing switch.
- Connect the switch wires to the wall box with the wire conductors according to the wiring diagramin the wire.
- Third step:Install the switch using the screws provided and snap the wall plate onto it.
- the fourth step:Turn the power back on at the circuit breaker, then turn on the lights.
Wiring method 1:
Neutral & Live wire(Neutral wire Required) The Live wire is connected to the “L” terminal, The Neutral wire is connected to the “N” terminal, Lighting wire is connected to “L1, L2, L3” terminals
1Gang switch lighting wire connection: “L1” terminal ****
2Gang switch lighting wire connection: “L1,L2” terminals
Wiring method 2:
- Single Live wire（No Neutral wire Required）
- The Live wire is connected to the “L” terminal, Lighting wire is connected to “L1, L2, L3” terminals
(L1 lamp needs to be connected to a capacitor)
1Gang switch lighting wire connection: “L1” terminal (L1 lamp needs to be connected to a capacitor)
2Gang switch lighting wire connection: “L1,L2” terminals (L1 lamp needs to be connected to a capacitor)
Add device
Add device to “Gosund” APP
- Step 1: Download and install the “Gosund” APP:Scan the QR code below
- Step 2: Enter the phone settings option, turn on the Bluetooth and WiFi functions, and turn on the product at the same time
- Step 3: Open the Gosund APP, register and log in your account, if you have a Gosund account, just log in.
- Step 4: Power on after the wiring is completed, the device is powered on by default, press and hold the touch wall switch button for about 8s, until the WiFi blue LED flashes quickly, enter the network configuration mode
- Step 5: Enter the App, click the “+” at the top right of the page to enter the network connection page.
- Step 6: Make sure your device’s light is blinking quickly (2 times per second) tap to proceed to the next step.
- Step 7: Enter your WiFi and password
- Step 8: Name your device.
- Step 9: When the WiFi LED is on, the device is online. Take control now!
How to use smart speakers to control devices, such as Amazon Alexa, Google Assistant or Tmall Genie?
Open the Gosund app to enter the “Me” view and find the user guide for the corresponding smart speaker.
Note: Before using the smart speaker, please log in to your account on Amazon Alexa, Google Assistant, or Tmall Genie.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.
- Hereby, Shenzhen Cuco Smart Technology Co., Ltd. declares that the radio equipment type G2 is compliant with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://cedeclaration.gosund.com/
- Frequency Range: 2400–2483.5 MHz Wi-Fi/Bluetooth Max. Transmitting Power: 20 dBm
- WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Contact Information
Shenzhen Cuco Smart Technology Co., Ltd.
- Address : Room 201, 301, Building A, No.12 Difu Road, Guxing Community, Xixiang Street, Bao’an District, Shenzhen 51800, Guangdong, P. R. China
- Website: www.gosund.net
- Email Support: [email protected]