PYRAMID 12425FZ Seat Cowl Instruction Manual
- June 16, 2024
- PYRAMID
Table of Contents
PYRAMID 12425FZ Seat Cowl
Kit Includes:
| 1X | 12425 | XSR 900 Seat Cowl |
|---|---|---|
| 2X | CWASM60007 | M6 x 22mm Rubber Washer |
| 3X | CWASM60004 | M6 Flat Plastic Washer |
Please note: The leather handling strap which is fitted to the OEM seat will become obsolete upon fitment of the Pyramid Seat Cowl.
OEM Parts (From the Motorcycle):
| X2 | OEM XSR 900 | M6 x 40mm Dome-Head Screw |
|---|
Assembly Instructions
The Pyramid Seat Cowl for the XSR 900 utilizes the existing mounting locations on the seat. You may prefer to remove the seat before fitting the seat cowl, but this is not necessary in order to complete the installation.
Begin by removing the existing leather strap on the OEM seat. Do this by
unscrewing the OEM M6 screw (Item 4). As mentioned above, the leather strap
will no longer be required. Slide the Pyramid Seat Cowl (Item 1) over the
seat. Locate and align the holes and then re-insert the OEM M6 screw (Item 4),
together with both rubber washer (Item 2) and plastic washer (Item 3) in the
order detailed in
‘FIG. 2’.
Replicate this on the other side. Please do not tighten the screws until the
seat cowl is sitting correctly over the seat. Then tighten until sufficient
resistance. Overtightening can cause damage to the seat cowl.
The seat cowl has now been fully fitted, as shown in ‘FIG. 1’.
Please Note: We advise that all fixings are checked periodically.
Customer Support
Any questions?
sales@pyramidmoto.co.uk
+44 (0)1427 677990
www.pyramidmoto.co.uk
Follow us on social media and feel free to leave us a review!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>