brother D02UNP-001 Advanced Multi Function Foot Controller Instruction Manual

brother D02UNP-001 Advanced Multi-Function Foot Controller

Product Information

Specifications

• Model: D02UNP-001
• Product Name: Advanced Multi-Function Foot Controller
• Functions: Start/Stop, Thread Cutting, Reverse Stitching

Product Usage Instructions

Assembling the Controller

1. Align the smaller end of the mounting plate with the guide on the bottom of the side pedal, and then gently fasten them together with the mounting screw.
2. Align the larger end of the mounting plate with the guide on the bottom of the main foot controller, and then gently fasten them together with the mounting screw.
3. Insert the plug for the side pedal into the jack on the main foot controller.
4. Turn off the machine.
5. Insert the plug for the main foot controller into the foot controller jack on the right side of the machine.

Specifying the Functions
Before specifying the functions, connect the multi-function foot controller to the machine. The settings screen is activated the first time that the machine detects the multi-function foot controller.

1. Touch “Settings” in the machine’s LCD screen.
2. Select the functions to be performed by the multi-function foot controller.

**Adjusting the Pedal Positions

**

The pedal spacing can be adjusted. Use the markings on the mounting plate as a convenient guide to adjust the spacing.

Adjusting the length of the Cord for the Main Foot Controller

1. Unwind the cord for the main foot controller.
2. Guide the cord between the tabs.
3. Wind the cord until it is the desired length.
4. Pass the cord between the tabs.

FAQs

• Q: What functions can be specified using the multi-function foot controller?
• A: The multi-function foot controller can be used to specify functions such as Start/Stop, Thread Cutting, and Reverse Stitching.
• Q: How do I adjust the pedal positions?
• A: The pedal spacing can be adjusted by using the markings on the mounting plate as a guide.
• Q: How do I adjust the length of the cord for the main foot controller?
• A: To adjust the cord length, unwind the cord, guide it between the tabs, wind it until desired length, and pass it between the tabs.
• Q: How do I connect the multi-function foot controller to the machine?
• A: Align the mounting plate with the guide on the side pedal and main foot controller, fasten them together with mounting screws. Insert the plug for the side pedal into the jack on the main foot controller, and then connect the main foot controller to the foot controller jack on the right side of the machine.

With the advanced multi-function foot controller, various sewing machine operations in addition to starting/stopping sewing, such as thread cutting and reverse stitching, can be specified to be performed.

WARNING
The advanced multi-function foot controller contains small parts. Keep the product out of the reach of children to prevent accidental ingestion of small parts.

Supplied Items

Assembling the Controller

1. Align the smaller end of the mounting plate with the guide on the bottom of the side pedal, and then gently fasten them together with the mounting screw. Align the larger end of the mounting plate with the guide on the bottom of the main foot controller, and then gently fasten them together with the mounting screw.
2. Insert the plug for the side pedal into the jack on the main foot controller. (1)
3. Turn off the machine.
4. Insert the plug for the main foot controller into the foot controller jack on the right side of the machine. (2)

Memo

• The side pedal can be mounted on either the left or right side of the main foot controller.
• The main foot controller and side pedal can also be used without installing the mounting plate.
• The speed that is set using the sewing speed controller will be the main foot controller’s maximum sewing speed.
• When the multi-function foot controller is connected, the “Start/Stop” button cannot be used to start sewing.

Specifying the Functions

Touch the machine’s LCD screen, and then select the functions to be performed by the multi-function foot controller. Before specifying the functions, connect the multi-function foot controller to the machine. The settings screen is activated the first time that the machine detects the multi-function foot controller.

Memo
The setting enables differ depending on the models. Visit the following webpage for detailed information. https://s.brother/csaaf/

**Adjusting the Pedal Positions

**

The pedal spacing can be adjusted. Use the markings on the mounting plate as a convenient guide to adjust the spacing.

Adjusting the length of the Cord for the Main Foot Controller

In order to avoid stepping on the cord with the main foot controller, pass the cord between the tabs.

1. Unwind the cord for the main foot controller.
2. Guide the cord between the tabs.
3. Wind the cord until it is the desired length.
4. Pass the cord between the tabs.

Memo
When storing the cord, pass it between the tabs, and then insert the plug into the jack on the main foot controller.

References

• Accessory information - Multi-Function Foot Controller

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>