ONIKUMA T308 Bluetooth Gaming Headset Tws Earphone User Manual

T308 Bluetooth Gaming Headset Tws Earphone
User Manual

*Please read the manual carefully and keep it for future use.

Descriptions

1. Left ear 2. Right ear
3. Earpiece indicator light
5. Microphone hole
7. Charging case| 2. Right ear
4. Multi-function button (MFB)
6. Type-C port
8. Charging case indicator light
---|---

Wearing

1. The correct way to wear
   L is the left ear, and R is the right ear. For an more comfortable audio experience, please try on each size of ear tips. Try wear the earphone correctly so that the earphones are closely and firmly seated in your ears.

2. Outdoor
   The human body contains a lot of water and has strong interference to Bluetooth signals. Generally, the main earphone is set to receive the Bluetooth signal of the mobile phone. It is recommended that try to put the mobile phone in the pocket on the side of the main ear to effectively prevent the human body from blocking the signal and to improve the anti-interference ability during using

Instructions

1. Charging
   a. To charge the charging case, please use a Type-C charger with DC5V-1A output. The indicator light on the case will blink red when charging, and stay solid red when fully charged.
   b. To charge the earbuds, please put the earbuds into the case and close the cover of the case. The earphones will be charged automatically;
   The charging case charges the earphone. The indicator light of the charging case is steady green, and the full light is off.

2. Connect the Equipment
   a. After opening the lid of the charging case, the left and right earsphones are automatically turned on and paired.
   b. Refresh the bluetooth device and search for T308. Then click to connect successfully.

3. Sngle Ear Connects the Equipment
   a. The method of single earphone pairing is the same as the point 2. (Use the left ear alone, take out the left earphone and wait for about 10S to search for connection)

4. Reset The Earphones ( When the earphones cannot work normally)
   a. To charge the earbuds, please put it into the charging case and close the lid. The earbuds will charge automatically. While charging, the indicator light on the earbuds will blink green, and turn off when fully charged.

Function control

Product Parameter

Frequently Asked Questions

1. The earphone cannot be detected by the mobile

a. To determine whether the headset is turned on, restart the earphone and mobile phone, and repeat the above actions to search. b. To make sure that the headset is not connected to other Bluetooth devices.

2. The left and right earphones cannot be paired

a. Put the earphone into the charging box and then take out to reconnection. b.Reconnect the headset after resetting it.

3. There is disconnections or noises in the connection between the earphone and the mobile phone

a. There are obstacles or other electrical signal interferences between the device and the earphone. Please keep the earphone and the device free of obstacles, and try not to use it in a complex environment. b. The effective working range of earphones and equipment is up to 8 meters. Generally,the situation without obstacles can achieve the best results.There will be noises and disconnections beyond the effective distance.

4. The headphone cannot be charged.

a. Please make sure that the headset is connected with the charging box. b. To make sure whether there are dirts or water stains on the charging contact point. Please keep it clean.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>