PURERESONANCE AUDIO PRA-S12 12 Inch High Output All Weather Coaxial Loudspeaker Instruction Manual
- July 9, 2024
- PURERESONANCE AUDIO
Table of Contents
- PURERESONANCE AUDIO PRA-S12 12 Inch High Output All Weather Coaxial
- Specifications
- Installation & Operation Guide
- CONNECTING THE SPEAKER TO YOUR SYSTEM
- SAFETY PRECAUTIONS
- SAFETY SYMBOL AND MESSAGE CONVENTIONS
- IMPORTANT SAFETY INSTRUCTIONS
- DESCRIPTION
- FEATURES
- SPECIFICATIONS
- DIMENSIONAL DIAGRAMS
- INSTALLATION & OPERATION GUIDE
- LIMITED WARRANTY
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PURERESONANCE AUDIO PRA-S12 12 Inch High Output All Weather Coaxial
Loudspeaker
Specifications
- Power Rating: 300 Watts RMS; 600 Watts Peak
- Sensitivity (@ 1w/1m): 105 dB
- Max SPL: 120 dB
- Dispersion
- Impedance: 8 Ohms
- Transformer Taps: 70V: 25W, 37W, 75W, 150W, 300W; 100V: 37W, 75W, 150W, 300W; 8 Ohm Bypass
- Woofer: 12 Paper cones with 3 voice coil
- Tweeter: 1.5 Thermoplastic
- Grill: Metal
- Material: Fiber-reinforced plastic and stainless steel enclosure
- Protection Rating: Weatherproof IP66
- Connection: Screw terminal
- Mount: Wall mounting bracket and M8 eyebolt supplied
- Dimensions (HxWxD): 14.76″ (375 mm) x 15.55″ (395 mm) x 17.13″ (435 mm)
- Weight: 44.75 lbs (20.3 kg)
- Shipping Dimensions (HxWxD): 19.49″ (495 mm) x 21.06″ (535 mm) x 19.69″ (500 mm)
- Shipping Weight: 47.73 lbs (21.65 kg)
Installation & Operation Guide
MOUNTING THE BRACKET
M8 Screw x6 M10 Screw x1
CONNECTING THE SPEAKER TO YOUR SYSTEM
- Remove the screws on the back of the speaker. Then, remove the waterproof seal and plastic cover from the terminal.
- The screw terminal connector accommodates the speaker wire input and output, thus allowing users to easily daisy-chain speakers in 70V applications.
- Determine the locations for the speakers and estimate the length of the additional wire you will need for each speaker.
- Connect the speaker wires to the (+) and (-) inputs based on the desired voltage and wattage.
- Feed the speaker wire through the hole in the seal cover. Replace the seal cover and tighten it.
- If sending a wire from the first speaker to an additional speaker is required, remove the plastic knockout.
SAFETY PRECAUTIONS
- Be sure to read the instructions in this section carefully before use. The included conventions of safety symbols and messages are regarded as essential precautions.
- We recommend that you keep this instruction manual handy for future reference.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage that could result from mishandling. Before operating this product, read this manual first and understand the safety symbols and messages so you are thoroughly aware of the potential safety risks.
WARNING
Indicates a potentially hazardous situation that, if mishandled, could result in death or serious personal injury.
CAUTION
Indicates a potentially hazardous situation which, if mishandled, could result
in moderate or minor personal injury, and/or property damage.
WARNING
IMPORTANT SAFETY INSTRUCTIONS
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TECHNICIAN.
THE PROVIDED INSTALLATION HARDWARE MUST BE USED TO INSTALL THIS PRODUCT.
Pro Acoustics is not responsible for the structural integrity of the
installation. Please ensure that a qualified technician installs this product
and that the building’s engineer or architect has approved the equipment and
installation.
- To prevent injury, this apparatus must be securely attached as per the installation instructions.
- DO NOT install near electricity, smoke, steam, or any heat source such as stoves, radiators, heat registers, amplifiers, or other apparatuses producing heat.
- DO NOT place any naked flame sources, such as candles, close to the product.
- DO ensure that the speaker wire is not damaged when installing. Frayed or unterminated wires can lead to electrical or fire danger.
- DO NOT connect the speaker while your hands are wet, as this may lead to electric shock.
- USE hardware and accessories as indicated by the manufacturer.
- REFER all servicing to qualified service personnel. Servicing is required when the speaker is damaged in any way, does not operate normally, or has been dropped.
No user-serviceable parts inside. Refer all servicing to qualified service
personnel.
Changes or modifications not expressly approved by the manufacturer could void
the user’s warranty.
CAUTION
Although these speakers are designed to withstand the elements, you should take precautions to optimize their long-term performance.
- Keep soil and wood chips from covering the speaker grill. If soil or dust accumulates on the grill, it can be rinsed away with low water pressure.
- Chemicals commonly used outdoors can damage the speaker’s rubber elements. Avoid spraying such chemicals onto or near the speaker.
- When the speaker is installed on a wall, ensure the structure can structurally support the weight of the speaker and its mounting hardware and that the speaker is firmly attached.
DESCRIPTION
The Pure Resonance Audio S12 stadium loudspeaker is a 12″ 300W full-range speaker that offers better audio quality, more powerful sound, precise speech reproduction, and a wide coverage angle of 90° x 90° compared to the 10″ 200W S10 speaker. The IP66-rated S12 speaker ensures dust-tight protection and resistance against direct high-pressure water. With a stainless steel enclosure, fiber-reinforced plastic cover, and a metal grill, this speaker is engineered to withstand harsh environmental conditions. Equipped with a 12″ coaxial LF and a 1.5″ HF driver, this 2-way outdoor loudspeaker delivers high- output sound, supported by a built-in 300W 70V/100V multi-tap transformer with an 8-ohm bypass. The S12 is perfect for music, paging, and general public address in stadiums, gymnasiums, fairgrounds, theme parks, warehouses, and other outdoor commercial applications.
FEATURES
- All-weather construction for long-term reliability in outdoor environments
- Superior sound quality with clear vocal reproduction
- 300 Watt 70 Volt / 100 Volt transformer with 8Ω bypass
- 105 dB Sensitivity provides high-output sound
- 12″ Low-frequency driver and 1.5″ high-frequency driver
- Highly weatherproof IP66 rated
- Ideal coverage of more than 4,000 square feet
- Direct speech distance of up to 700 feet
- Weather-safe connection with a recessed terminal block and waterproof seal cover
- Fiber-reinforced plastic and stainless steel enclosure with metal grill
- Heavy-duty wall mounting bracket and eyebolt included for secure installation
SPECIFICATIONS
| Power Rating | 300 Watts RMS; 600 Watts Peak |
|---|---|
| Frequency Response (±3 dB) | 70Hz – 20kHz |
| Sensitivity (@ 1w/1m) | 105 dB |
| Max SPL | 120 dB |
| Dispersion | 90° x 90° |
| Impedance | 8 Ohms |
Transformer Taps
| 70V: 25W, 37W, 75W, 150W, 300W
100V: 37W, 75W, 150W, 300W
8 Ohm Bypass
Woofer| 12″ Paper cone with 3″ voice coil
Tweeter| 1.5″ Thermoplastic
Grill| Metal
Material| Fiber-reinforced plastic and stainless steel enclosure
Protection Rating| Weatherproof IP66
Connection| Screw terminal
Mount| Wall mounting bracket and M8 eyebolt supplied
Dimensions (HxWxD)| 14.76″ (375 mm) x 15.55″ (395 mm) x 17.13″ (435 mm)
Weight| 44.75 lbs (20.3 kg)
Shipping Dimensions (HxWxD)| 19.49″ (495 mm) x 21.06″ (535 mm) x 19.69″ (500
mm)
Shipping Weight| 47.73 lbs (21.65 kg)
DIMENSIONAL DIAGRAMS
INSTALLATION & OPERATION GUIDE
MOUNTING THE BRACKET
CONNECTING THE SPEAKER TO YOUR SYSTEM
- Remove the screws on the back of the speaker. Then, remove the waterproof seal and plastic cover from the terminal.
- The screw terminal connector accommodates speaker wire input and output, thus allowing users to easily daisy-chain speakers in 70V applications.
- Determine the locations for the speakers and estimate the length of the additional wire you will need for each speaker.
- Connect the speaker wires to the (+) and (-) inputs based on the desired voltage and wattage.
- Feed the speaker wire through the hole in the seal cover.
- Replace the seal cover and tighten it.
- If sending a wire from the first speaker to an additional speaker is required, remove the plastic knockout from the seal cover and add the provided collet nut.
PLEASE NOTE: The external nut requires a 7/8″ wrench, and the internal nut requires a 15/16″.
MOUNTING THE SPEAKER
- Combine the speaker with the wall bracket.
- Confirm the mounting is secure.
SERVICE
In the event of a malfunction, ensure the problem is not related to operator error or system devices external to this unit. Once it is certain that the problem is related to the product, contact your warranty provider as described in the warranty section of this manual.
LIMITED WARRANTY
PRO ACOUSTICS, LLC. (“PRO ACOUSTICS”) warrants this product to the original
purchaser to be free from defects in materials and workmanship (subject to the
terms set forth below) for the following periods from the date of purchase.
THIS WARRANTY COVERS THE LISTED PRODUCTS AGAINST DEFECTS IN MATERIALS OR
WORKMANSHIP FOR THE FOLLOWING PERIOD
PRO ACOUSTICS will repair or replace (at PRO ACOUSTICS’s option) this product
or any defective parts (excluding electronics and amplifiers) in this product.
Your authorized PRO ACOUSTICS dealer will inspect the product, and if your
dealer is not equipped to perform the repair of your PRO ACOUSTICS product,
they will replace your product or return it to PRO ACOUSTICS for repair at
their discretion. Proof of purchase in the form of a bill of sale or receipted
invoice, which is evidence that this product is within the warranty period,
must be presented to obtain warranty service.
This warranty is invalid if the factory-applied serial number has been altered
or removed from this product. This warranty is invalid if this product was not
purchased from a PRO ACOUSTICS authorized dealer. Cosmetic damage or damage
due to the accident, acts of God, misuse, abuse, negligence, commercial use,
or modification of, or to any part of, the product are not covered in this
warranty. This warranty does not cover damage due to improper operation,
maintenance, installation, or attempted repair by anyone other than PRO
ACOUSTICS or a PRO ACOUSTICS dealer that is authorized to do PRO ACOUSTICS
warranty work. Any unauthorized repairs will void this warranty.
This warranty does not cover products sold as is.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE
REMEDY OF THE CONSUMER/PURCHASER. PRO ACOUSTICS U.S.A. SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES
WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PRACTICAL PURPOSE.
This warranty gives you specific legal rights. You may have other rights which
vary from state to state.
PURE RESONANCE AUDIO®
FAQ
Q: Is this product suitable for outdoor use?
A: Yes, this product has a weatherproof IP66 protection rating and is designed to withstand outdoor elements.
Q: Can I daisy-chain multiple speakers with this product?
A: Yes, the screw terminal connector allows for easy daisy-chaining of speakers in 70V applications.
Q: What is the recommended power supply for this product?
A: The power rating of this product is 300 Watts RMS; 600 Watts Peak. Ensure your power supply meets these requirements for optimal performance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>