2Boom BT499 LED Portable Party Speaker Instruction Manual
- June 16, 2024
- 2Boom
Table of Contents
2Boom BT499 LED Portable Party Speaker Instruction Manual
IMPORTANT SAFETY INFORMATION
- Read all instructions before using this product.
- Do not leave this product unattended while connected to the power supply.
- Do not immerse in water or any other liquids.
- Do not use if unit has been dropped or damaged in any way.
- Improper repairs may place user at serious risk.
- Repairs to electrical equipment should only be performed by qualified personnel. Place unit unsound, evensurface, free of vibrations and away from sources of heat.
- Do not put objects into openings.
- Do not use this unit for anything other than its intended use.
- Keep this product out of reach of children.
- This product is not a toy. Do not play music at excessive levels especially near children, as damage to hearing may occur.
CAUTION:
Risk of Fire and Burns. Do Not Open, Crush, Heat Above (manufacturer’s
specified maximum temperature) or Incinerate. Follow Manufacturer’s
Instructions.
GETTING STARTED:
Remove the unit from the box. Remove any packaging from the product. Please
retain all packaging until you have checked and counted all the parts and the
contents against the parts list.
ACCESSORIES:
Wireless Speaker Box: 1PC
USB charging Cable: 1PC
USE MANUAL : 1PC
FEATURES：
Wireless connectivity
Colorful light FX
Support USB
FM Radio
Rechargeable Lithium battery
BLUETOOTH CONNECTION :
Turn on the speaker unit and the Mobile or other devices, and search for paring name “ 2BOOM-BT499 “topairthe two devices.
Once paired before, it will automatically connect after the unit is turned on.
PANEL FUNCTION
- USB port
- Charging port(DC5V)
- Charging LED
- ON/OFF
- Short press to change speaker modes (Bluetooth/FM/USB) / Long-press to connected the TWS
- Play/Pause/Scan(Auto search in FM mode) / Long-press the button can connected or disconnected the Bluetooth-Connect
- Short press for previous song/ long press for volume down
- Short press for next song/long press for volume up
- Short press to change 5 RGB light modes / long press to turn on/off light
CHARGING
Plug the USB cable into the speaker’s charging port and connect to the power source. The RED LED indicator on panel will be on when the unit is charging
USB
Insert the U flash memory into the USB slot, the speaker box will read the MP3 format music automatically.
FM RADIO
Press ll/SCAN to search FM channels automatically. This operation will scan all F Stations and Pre-record them to memory. The scan procedure will take several minutes and cannot be interrupted. Once completed, press ” ” or ” ” button to be previous track or next track.
RGB LIGHT MODE
There are 5 different RGB light modes. Short press “LED” button to switch between different RGBmodes. Thelastused RGB light mode will be stored in the speaker memory before switching it off, and it will be restore dance the speaker unit is powered on the following time. Long-press the LED button to turn on/off the light.
TWS
Two the same model speakers can be connected to one wireless device at the same time. Firstly, turn the speakers on, long press “MODE” button on any speaker for several seconds; then you will hear the sound of” BEEP” to indicate that the two units have been paired successfully. Please ensure before pairing that the tourist are not connected with other devices.
SPECIFICATIONS
Bluetooth version :5.2
Distance : 32.8 ft
Speaker size: 3” Output power: 3W
Frequency response:55Hz-13KHz
Signal to noise ratio: >80db
Battery capacity: 500mAh
Play time:2hrs
Charging time:3-4hrs
FCC ID: 2AIDL-BT499
QDID:194248
FCC STATEMRNT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warming: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Notes: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, The device has been evaluated to meet general RF exposure requirement.
MI gear International Group LLC, 21 W 38th Street, 14th Floor, NY, NY 10018
USA
TEL: 929-390-4504
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>