TROX MFE Very Compact Installation Guide
- June 16, 2024
- TROX
Table of Contents
TROX MFE Very Compact
Product Information
Specifications
- Product Name: MFE
- Compactness: Very compact
- Installation: Modular
- Filter Classes: F9, E11, H13
- Performance Data: EN 779 or EN 1822 Eurovent certification
- Filter Media: Glass fiber papers
- Spacers: Textile threads
- Initial Differential Pressure: Low
- Special Characteristics: Leakage test standard for all particulate filters of filter class H13
Product Usage Instructions
Application
The MFE is designed for use as pre-filters or final filters in ventilation systems. It can be used for the separation of fine dust or to meet the most critical requirements in terms of filtration.
Construction
The MFE is available in two construction options:
- GAL: Frame made of galvanized steel
- AL: Frame made of aluminum
Accessories
The MFE filter elements are joined together using a special adhesive tape.
This adhesive tape not only joins the filter elements but also provides an
air-tight seal between the filter elements and the mounting frame or
installation casing.
Please note that the special adhesive tape for sealing off the filter elements
must be ordered separately.
Materials and Surfaces
The MFE features the following materials and surfaces:
- Filter media: High-quality, moisture-resistant glass fiber papers that are pleated.
- Spacers: Textile threads that provide a uniform spacing of the pleats.
- Joint sealing compound: Permanently elastic two-component polyurethane adhesive.
- Frame: Either galvanized sheet steel or aluminum.
FAQ
Q: What are the available filter classes for the MFE?
- A: The MFE is available in filter classes F9, E11, and H13.
Q: What is the special characteristic of the MFE?
- A: The MFE undergoes a leakage test, which is a standard feature for all particulate filters of filter class H13.
MFE IS VERY COMPACT, FOR MODULAR INSTALLATION
- Prefilters or final filters for the separation of fine dust, or particulate filters for the most critical requirements in ventilation systems.
- Filter classes F9, E11, H13
- Performance data to EN 779 or EN 1822
- Eurovent certification for fine dust filters
- Filter media for special requirements, made of glass fiber papers, with spacers made of textile threads
- Low initial differential pressure due to ideal pleat position and largest possible filter area
Application
- Mini Pleat filter element type MFE for the separation of fine dust and suspended particles such as aerosols, toxic dust, viruses, and bacteria from the supply and extract air in ventilation systems with large volume flow rates and the requirement for long filter life
- Fine dust filter: Prefilter or final filter for the separation of fine dust in ventilation systems.
- Particulate filter: Main or final filter used for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering
Special Characteristics
- Leakage test, a standard for all particulate filters of filter class H13
Description
Filter classes
- Fine dust filter F9
- Particulate filters E11, H13
Construction
- GAL: Frame made of galvanized steel
- AL: Frame made of aluminum
Accessories
- Adhesive tape for sealing off the filter elements, width: 19 mm, length: 55 m
- Order number: ACC-AT
- One roll suffices for about 50 filter elements of size 600 × 65 × 202 mm, for about 100 filter elements of size 86.5 × 202 × 600 mm, or about 70 filter elements of size 86.5 × 303 × 600 mm
Construction features
- The filter elements are joined together by a special adhesive tape which also provides an air-tight seal between the filter elements and the mounting frame or installation casing
- The special adhesive tape for sealing off the filter elements must be ordered separately
Materials and surfaces
- Filter media made of high-quality, moisture-resistant glass fiber papers, pleated
- Spacers provide a uniform spacing of the pleats
- The joint sealing compound is made of permanently elastic two-component polyurethane adhesive
- Frame made of either galvanized sheet steel or aluminum
INFORMATION TECHNIQUE
- Mini Pleat filter elements MFE for the separation of fine dust and suspended particles such as aerosols, toxic clouds of dust, viruses, and bacteria from the supply and extract air in ventilation systems.
- Use as fine dust filters, i.e. as prefilters or final filters in ventilation systems; or as particulate filters, i.e. main or final filters for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering.
- Large volume flow rates and long filter life due to the very compact, modular structure. The filter medium is made of high-quality, moisture-resistant glass fiber papers, with spacers.
- Low initial differential pressure due to ideal pleat position and largest possible filter area.
- Mini Pleat filter elements are available in all commercial sizes, filter classes F9, E11, and H13.
- The filter elements are joined together by a special adhesive tape which also provides an air-tight seal between the filter elements and the mounting frame or installation casing.
- The special adhesive tape must be ordered separately.
- Mini Pleat filter elements used as fine dust filters are certified by Eurovent.
- Special Characteristics
- Leakage test, the standard for all particulate filters of filter class H13
Materials and surfaces
- Filter media made of high-quality, moisture-resistant glass fiber papers, pleated
- Spacers provide a uniform spacing of the pleats
- Joint sealing compound made of permanently elastic two-component polyurethane adhesive
- Frame made of either galvanized sheet steel or aluminum
Construction
- GAL: Frame made of galvanized steel
- AL: Frame made of aluminum
Sizing data
- Filter class
- Volume flow rate [m³/h]
- Initial differential pressure [Pa]
- Nominal size [mm]
- Туре
- MFE Mini Pleat filter element
- Filter class
- F9 Fine dust filter according to EN 779
- E11 Particulate filter according to EN 1822
- H13 Particulate filter according to EN 1822
- Construction
- GAL Frame made of galvanized steel
- AL Frame made of aluminium
- Nominal size [mm]
- Bx HxT
References
- WELKOM - BIENVENUE | S.A. TROX Belgium/TROX Belgium N.V.
- Filtres plissés | S.A. TROX Belgium/TROX Belgium N.V.
- Produits | S.A. TROX Belgium/TROX Belgium N.V.
- Filtres et médias filtrants | S.A. TROX Belgium/TROX Belgium N.V.
- Conditions générales de ventes TROX Belgique | S.A. TROX Belgium/TROX Belgium N.V.
- Disclaimer | S.A. TROX Belgium/TROX Belgium N.V.
- Imprint | S.A. TROX Belgium/TROX Belgium N.V.
- OUR PRIVACY POLICY | S.A. TROX Belgium/TROX Belgium N.V.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>