TROX FK2-EU Fire Damper Installation Guide
- June 11, 2024
- TROX
Table of Contents
TROX FK2-EU Fire Damper
Product Information
The installation kit GLK is designed for the fire damper type FK2-EU. The kit includes connecting clips, GLK stripes H-side, and a special tool. The product is manufactured by TROX GmbH and is available in Neukirchen-Vluyn, Germany.
Product Usage Instructions
To install the left and right fire dampers using the GLK installation kit, follow the steps below:
- Place both fire dampers on Pos. 180 and push together.
- Place two GLK strips between the fire dampers.
- Rotate the left fire damper to 180 degrees (operation side left).
- Use the special tool to insert the connecting clips between the GLK strips and the fire dampers.
- Attach the GLK stripes H-side to the fire dampers using screws (not included in the kit).
- Refer to the installation and operating manual FK2-EU for further installation details with GLK.
Scope of delivery
TROX GmbH
- Heinrich-Trox-Platz
- D-47504 Neukirchen-Vluyn, Germany
- Telefon / Phone +49(0)28 45/2 02-0
- Telefax / Fax +49(0)28 45/2 02-2 65
- www.trox.de/www.troxtechnik.com
Lieferumfang / Scope of delivery
Position / Item| Benennung / Name| Stück / Quantity
10| Installation kit B-side below, left fire damper| 1
20| Installation kit B-side above, left fire damper| 1
30| / Installation kit B-side below, right fire damper| 1
40| Installation kit B-side above, right fire damper| 1
50| Installation kit H-side left (inside with axle recess)| 2
60| Installation kit H-side right (inside with axle recess)| 2
70| Chipboard screw 5 × 100 mm| 3 – 9 (2)
80| Connecting clip| 16
90| Chipboard screw 5 × 80 mm| 8 – 14 (2)
100| GLK stripes H-side (d = 15 mm)| 2 (1)
110| Cover B-side (d = 10 mm)| 2
120| 4 × 35 mm / Half-round chipboard screw 4 × 35 mm| 8 – 20 (2)
130| M10 / hexagon nut M10| 12
140| 130 mm / Threaded rod M10, length approx. 130 mm| 6
150| 57 × 40 × 5 mm / Steel angle approx. 57 × 40 × 5 mm| 4
160| ca. 57 × 110 × 5 mm / Double hole angle approx. 57 × 110 × 5 mm| 2
170| Multilayer section H-side right, right fire damper| 1 (1)
180| Multilayer section B-side including metal profile below| 1 (1)
190| . 110 × 30 × 5 mm / GLK flat steel approx. 110 × 30 × 5 mm| 2
200| Multilayer section H-side left, left fire damper| 1 (1)
Special Tool
Installation
- Work steps for the right fire damper
- Work steps for the left fire damper
- left fire damper is rotated to 180 degrees (operation side left)
- Work steps for the left fire damper
- Work steps for the right fire damper
- place both fire dampers on Pos. 180 and push together
- Depending on the size of the installation kit GLK
- Place two GLK strips between the fire dampers
-
Rearview of the installation kit
-
Ø3,5 mm Stahl Bohrer / Metal drill
-
100 mm tief / deepFlush right and left
-
Ø3,5 mm Stahl Bohrer / Metal drill
-
80 mm tief / deep
Next Step
Further installation details with GLK… see installation and operating manual FK2-EU
Montageanleitung FK2-EU Einbausatz GLK / Installation manual FK2-EU installation kit GLK (08_2022 3891599.asm
References
- TROX | Komponenten, Geräte + Systeme zur Belüftung und Klimatisierung von Räumen | TROX GmbH
- TROX | Komponenten, Geräte + Systeme zur Belüftung und Klimatisierung von Räumen | TROX GmbH
- Homepage | TROX GmbH
- Homepage | TROX GmbH
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>