TROX TLH Basic Supply Diffuser Instruction Manual
- June 16, 2024
- TROX
Table of Contents
TROX TLH Basic Supply Diffuser
Product Information
Specifications
- Product Name: TLH
- Application: Basic supply diffuser for wall, ceiling, or riser installation
- Design: Perforated front with a connection collar and a wide rubber gasket
- Materials: Steel
- Finish: RAL 9003 – gloss 30
- Gasket: EPDM rubber gasket fitted as standard
Product Usage Instructions
Installation
- Identify the desired location on the wall, ceiling, or riser for installing the TLH diffuser.
- If installing in a duct, ensure that the duct has the appropriate dimensions or groove with an equivalent inside diameter.
- Place the TLH diffuser into the duct or groove, ensuring that the perforated front is facing outward.
- Secure the TLH diffuser by using a press-and-twist method. Apply pressure while twisting the diffuser clockwise until it is firmly in place.
Removal
- To remove the TLH diffuser, reverse the installation process.
- Twist the diffuser counterclockwise while pulling it gently away from the duct or groove.
Frequently Asked Questions (FAQ)
- 1. Can the TLH diffuser be installed on any surface?
- The TLH diffuser can be installed on walls, ceilings, or risers.
- 2. What is the finish of the TLH diffuser?
- The TLH diffuser comes in a RAL 9003 – gloss 30 finish.
- 3. How is the TLH diffuser secured during installation?
- The TLH diffuser is secured using a press-and-twist method. Apply pressure while twisting the diffuser clockwise until it is firmly in place.
- 4. How do I remove the TLH diffuser?
- To remove the TLH diffuser, twist it counterclockwise while gently pulling it away from the duct or groove.
TLH
- Excellent induction
- Versatile positioning
- Suitable as a ceiling, wall, and riser diffuser
- Installed directly in ductwork or groove – no tools required
APPLICATION
TLH is a basic supply diffuser for wall, ceiling or riser installation.
Design
TLH features a perforated front and a connection collar fitted with a wide rubber gasket for installation directly in duct or groove without additional fastening devices.
DESCRIPTION
Materials and surfaces
TLH is made of steel and comes in a RAL 9003 – gloss 30 finish with an EPDM rubber gasket fitted as standard.
INSTALLATION
TLH is installed directly in the duct as shown in Fig. 3 or in a groove with an equivalent inside diameter, and is secured by using a press-and-twist method. The diffuser is removed by reversing the action, i.e. twist and pull.
INFORMATION TECHNIQUE
- Example:
- TLH- 125 / 0
- Explanation:
- TLH supply diffuser dim. 0125.
References
- WELKOM - BIENVENUE | S.A. TROX Belgium/TROX Belgium N.V.
- TLH | S.A. TROX Belgium/TROX Belgium N.V.
- Bouches circulaires | S.A. TROX Belgium/TROX Belgium N.V.
- Produits | S.A. TROX Belgium/TROX Belgium N.V.
- Diffusion d'air | S.A. TROX Belgium/TROX Belgium N.V.
- Conditions générales de ventes TROX Belgique | S.A. TROX Belgium/TROX Belgium N.V.
- Disclaimer | S.A. TROX Belgium/TROX Belgium N.V.
- Imprint | S.A. TROX Belgium/TROX Belgium N.V.
- OUR PRIVACY POLICY | S.A. TROX Belgium/TROX Belgium N.V.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>