Antari B-100 Bubble Machine User Manual

Antari B-100 Bubble Machine

Product Information

Specifications

• Model: B-100/B-100X
• Language: English

Introduction
Please read all the user manual before operating the machine, and place the manual where the user can refer to it at all time. The manual includes how to install and operate the machine under safe conditions and explains all the labels printed on the machine. If you encounter any problem, contact your local Antari dealer for assistance immediately.

Safety Information

DANGER: If the danger is not avoided, it will cause death or serious injury.

• Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may cause serious consequences.
• Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of electrocution. For grounding instruction, please refer to Appendix I on page 15.
• Do not operate the machine with a bundled power cord, it could lead to a fire hazard. When operating the machine, do not point at people, animals, or fire.

WARNING: If the warning is not heeded, it can cause death or serious injury.

• Please operate the machine on a flat, level hard and well-ventilated surface area, reserve at least 50cm space around the machine and make sure there is no flammable gas or material nearby.
• Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock or result in fire.
• The machine can only be operated by adults or professionals, is not intended for use by persons with reduced physical sensory, mental capabilities, or lack of experience and knowledge including children.
• Do not leave the machine running unattended, make sure all powers are off when leaving. Children should be supervised to ensure that they do not play with the machine. Do not use the machine upside down or tilt it, it might cause damages or malfunction. Please store the fluid inside in a well-ventilated area without direct sunlight and keep out of reach of children.

CAUTION: If the precaution is not taken, it may cause minor or moderate injury.

• Keep the machine dry at all times. The machine is not waterproof, do not expose the machine to water, rain, or moisture environment.
• Please make sure the power outlet is not damaged or loose before plugging in the power cord. If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise, the warranty will be void. Before operating the machine, please make sure the bubble fluid is filled in the fluid box.
• Before transporting or moving the machine, please make sure the fluid is drained and fluid box is empty. (Recommend using original package)
• The machine is for indoor use only. Do not operate the machine in any area with unstable voltage. If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately.

Product Usage Instructions

Installation

1. Choose a flat, level hard surface area for installation.
2. Ensure there is at least 50cm space around the machine and no flammable gas or material nearby.
3. Connect the machine to a correctly rated power outlet using the provided power cord.
4. Ensure the power outlet is not damaged or loose before plugging in the power cord.
5. Make sure the machine is properly grounded to avoid the risk of electrocution.
6. Refer to Appendix I on page 15 for grounding instructions.

Operation

1. Ensure the bubble fluid is filled in the fluid box before operating the machine.
2. Turn on the power switch located on the machine.
3. The machine will start producing bubbles.
4. Do not point the machine at people, animals, or fire while operating.
5. Keep an eye on the machine during operation and do not leave it running unattended.

Maintenance

1. After use, turn off the power switch and unplug the power cord.
2. Drain the remaining bubble fluid from the fluid box before transporting or moving the machine.
3. Store the machine in a well-ventilated area without direct sunlight.
4. Keep the machine dry at all times and avoid exposure to water, rain, or moisture environments.

Troubleshooting
If you experience any issues or malfunctions with the machine, please refer to the troubleshooting section in the user manual or contact your local Antari dealer for assistance.

FAQ

• Q: Can children operate the bubble machine?
  A: No, the machine can only be operated by adults or professionals. It is not intended for use by persons with reduced physical sensory, mental capabilities, or lack of experience and knowledge including children.

• Q: What should I do if the power cord is damaged?
  A: If the power cord is damaged, it must be replaced by Antari or its local dealers. Using a damaged power cord may void the warranty.

• Q: Can I leave the machine running unattended?
  A: No, it is not recommended to leave the machine running unattended. Ensure all powers are off when leaving the machine.

• Q: How should I store the bubble fluid?
  A: Store the bubble fluid in a well-ventilated area without direct sunlight and keep it out of reach of children. Do not leave unused fluid in the fluid box for an extended period.

• Q: What should I do if the bubble wheel stops by force?
  A: Do not stop the bubble wheel by force as it may damage the motor. If you encounter any issues with the bubble wheel, refer to the troubleshooting section in the user manual or contact your local Antari dealer for assistance.

• Q: Is the machine waterproof?
  A: No, the machine is not waterproof. Do not expose it to water, rain, or moisture environments.

User Manual

Introduction

Please read all the user manual before operating the machine, and place the manual where the user can refer to it at all time. The manual includes how to install and operate the machine under safe condition and explain all the labels printed on the machine. If you encounter any problem, contact your local Antari dealer for assistant immediately.

Safety Information

**| DANGER| If the danger is not avoided, it will cause death or serious injury
---|---|---
**| WARNING| If the warning is not heeded, it can cause death or serious injury.
**| CAUTION**| If the precaution is not taken, it may cause minor or moderate injury.

DANGER

• Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may cause serious consequences.
• Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of electrocution. For grounding instruction, please refer to Appendix I on page 15.
• Do not operate the machine with a bundled power cord, it could lead to a fire hazard.
• When operating the machine, do not point at people, animals, or fire.

WARNING

• Please operate the machine on a flat, level hard and well ventilated surface area, reserve at least 50cm space around the machine and make sure there is no flammable gas or material nearby.
• Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock or result in fire.
• The machine can only be operated by adults or professionals, is not intended for use by person with reduced physical sensory, mental capabilities, or lack of experience and knowledge including children.
• Do not leave the machine running unattended, make sure all powers are off when leaving.
• Children should be supervised to ensure that they do not play with the machine.
• Do not use the machine upside down or tilt it, it might cause damages or malfunction.
• Please store the fluid inside in a well ventilated area without direct sunlight and keep out of reach of children. In case of eye contact or accidentally swallow the fluid, please seek medical attention immediately.
• Do not leave unused fluid in the fluid box for an extended period.
• Do not stop the bubble wheel by force, it will damage the motor.
• Surface will be slippery after use a period of time.

CAUTION

• Keep the machine dry at all time. The machine is not waterproof, do not expose the machine to water, rain, or moisture environment.

• Please make sure the power outlet is not damaged or loose before plug in the power cord.

• If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise the warranty will be void.

• Before operating the machine, please make sure the bubble fluid is filled in the fluid box.

• Before transporting or moving the machine, please make sure the fluid is drained and fluid box is empty.
  (Recommend using original package)

• The machine is for indoor use only.

• Do not operate the machine in any area with unstable voltage.

• If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately and contact your local Antari dealer for assistant.

• Do not contact any moving part.

• Only use accessories recommended or sold by Antari.

• Please make sure the power is off when not using the machine and unplug the power cord if not intend to use for a long period of time.

• To disconnect, turn all controls to the off position, then remove plug from outlet.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Unplug from outlet before servicing or cleaning.

• When finished, disconnect power and remove all bubble fluid from the fluid box.

• Do not overfill your bubble machine, overfilling will cause the leakage.

• Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or is dropped or damaged in any manner. Return machine to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.

Before operating the machine, please read all warning labels on the machine, description as below:

Top Cover Printing
WARNING!
DISCONNECT POWER BEFORE CHANGING FUSE NO USER SERVICEABLE PARTS INSIDE
USE ONLY WITH ADULT SUPERVISION
FOR INDOOR USE ONLY. KEEP DRY

Package Contents & Inspection
Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure it is the correct model and all parts are included. If any part appears to be damaged or missing during transportation, please contact your local dealer and return with original package for inspection.

Package Contents

Code on the Machine

Optional Accessories (B-100X Only)

Machine Details

5. Technical Label Information
Please read the technical label information on the back of the machine before operating it.

1. Model Name| 5. Breaker/Fuse
2. Input Voltage| 6. QR CODE for User Manual
3. Frequency| 7. Serial No.
4. Rated Power|

Bubble Fluid

CAUTION
Always turn off the power before filling the fluid box. Do not add flammable liquid to the fluid box. If fluid gets inside the machine, please contact your local Antari dealer for assistant.

• Only the bubble fluid manufactured by Antari can be used, do not mix or dilute the bubble fluid. Due to improper storage or using other fluid might cause malfunction.
• The machine is tested and calibrated with the specific bubble fluid to get the best performance.
• The warranty on your bubble machine will be void if you use bubble fluid not manufactured by Antari.

Setting and Manual Operation

WARNING
Machine falling off might cause serious injury, please make sure it is secure and firm on the overhead.

1. Step 1. Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50cm open space around the machine, and make sure there is no flammable gas or material nearby;

2. Step 2. Fill the fluid box with Antari approved bubble fluid;

3. Step 3. Plug the machine to the power outlet. Please read the technical label on the back of the machine and make sure the power outlet has the correct rated voltage for the machine;

4. Step 4. Turn on the power, the internal bubble wheel and fan will active and start to produce bubble. Turn off the
   power to stop.

5. Step 5. To turn off the power, please make sure the machine is not operating. If you will not use the machine a  long period of time, please unplug the power cord.

Filling Bubble Fluid
Ensure your bubble machine is unplugged from the main electrical supply before attempting to open the housing.

• To help avoid accidental exposure to dangerous live AC mains voltage, two safety screws are fitted that require a screwdriver to remove. Once these are removed, the finger screws can be undone by hand (see photo below).
• Once the screws are removed, the lid of the housing can be carefully swung upwards, as shown below. Make sure not to spill any of the bubble fluid inside the unit.
• The fluid box is designed to fit only one way around. Make sure you insert it correctly, as shown below, with the lower edge facing into the machine.
  • Always check bubble fluid level.
  • Please make sure that the bubble wands are completely covered with bubble fluid.
  • Do not overfill the bubble fluid – stop 5cm below the box top edge to avoid overflow and internal damage. ***Only use Antari Bubble Fluid – the machine cannot run on water only or other uncertified fluid.

Control Settings

B-100/B-100X Bubble Machine can be operated in the following modes. The machine can only accept 1 type of signal at a time. When using different control modes at the same time, the machine will work according to built-in control priority:

Z-10 Cable Remote (Optional)

Z-10 Cable Remote is an optional accessory for B-100X Bubble Machine, please see instruction below;

1. Plug the cable remote to the connector on the back of the machine;
2. When the green indicator light is solid, it’s ready to bubble;
3. Press the red button to start bubbling and release the red button to stop bubbling. ** If you encounter any problem, please contact your local Antari dealer for assistant.

BCT-1 Timer Cable Remote (Optional)

BCT-1 Timer Cable Remote is an optional accessory for B-100X Bubble Machine, please see instruction below;

Note

• You must turn on the power of the remote in order to use it.
• If the TIMER function is off, you can still press the Green button to start bubbling.
• The “DURATION” and “INTERVAL” knobs are using analog signal, therefore can’t define a specific time range. ** If you encounter any problem, please contact your local Antari dealer for assistant.

BCR-1 Wireless Remote (Optional)

BCR-1 Wireless Remote is an optional accessory for B-100X Bubble Machine, it included a receiver and a wireless transmitter. It’s ready to use, no pairing necessary, please see instruction below;

Service and Maintenance

DANGER
Disconnect the power cord before starting maintenance operation!

• Always keep the machine clean.
• Can use an air compressor, a vacuum or a soft brush to remove the dust on the machine.
• Can use a slightly damp cloth to clean the casing.
• Before store or after use the machine, please make sure the fluid box is empty and dry.
• It is recommended to run the machine at least once a month in order to maintain its best performance and output condition.
• Excessive dust and build up liquid residue will reduce the performance and cause overheat.

Technical Specifications

| B-100| B-100X
---|---|---
Input Voltage|

• US Model : AC 100-120V, 50/60Hz 0.5A
• EU Model : AC 220-240V, 50/60Hz 0.5A

Rated Power|

• 120V 30W
• 240V 32W

Fluid Consumption| 8.3 ml/min (100% Output)
Operating Time| 1.4 hrs (100% Output)
Fluid Box Capacity| 0.7 Liters (0.18 gallon)
Compatible Fluid| Antari BL Bubble Fluid
Ambient Temp. Range| 5°C – 40°C (41°F – 104°F)
Control Methods| Manual|

• Manual、Timer (Optional)、Cable Remote
• (Optional)、Wireless Remote (Optional)

Interface| N/A
DMX Channel| N/A
Included Accessories| Hanging Bracket
Optional Accessories| N/A|

• Z-10 Cable Remote 、 BCT-1 Timer Cable
• Remote、BCR-1 Wireless Remote

Dimension| L 341 W 170 H 172 mm (L 13.43 W 6.69 H 6.77 inch)
Weight| 4.2 kg (9.26 lbs.)

Warranty Disclaimer

We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in connection with the use, sale, or repair of any merchandise purchased from us.

Machine Dimension

Appendix I – Grounding Instruction
This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment- grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal. Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120 V circuit, and has a grounding plug that looks like the plug illustrated in sketch A in Figure. A temporary adaptor, which looks like the adaptor illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by the metal screw.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>