ROSA CUDDLE II LED REG 96 LED Light for Pedestrian Crossings Instruction Manual
- June 16, 2024
- ROSA
Table of Contents
CUDDLE II LED REG 96 LED Light for Pedestrian Crossings
Instruction Manual
CUDDLE II LED REG 96 LED Light for Pedestrian Crossings
TECHNICAL DATA
| Application | urban roads, residential roads (internal), pedestrians, parkings |
|---|---|
| Assembly | – |
| Colour | inox / black |
| Ingress protection | IP 66 for the optical part and the driver |
| Optical system | PMMA optics, interchangeable LED module, PC-UV diffuser |
| Material | anodised aluminium alloy |
| Operating temperature range | from -40°C to +40°C |
| Expected useful lifetime CRI | L90B10 – 100 000 h |
| CRI | >80 |
| Inrush current | 58A / 340µs |
| Input voltage frequency | 50/60Hz |
| Power factor | ≥0.95 |
| Number of LED | 64 |
| Control system | Luminaire has the possibility to connect to an external |
control system via DALI interface (optionally via analog signal 1- 10V).
Code| Symbol| LED power| Luminaire power
consumption| LED forward
current| Colour temperature
(CCT)| LEDs luminous
ux¹| Luminaire
luminous
ux¹| Luminous
ecacy¹| Unit volume| Net weight
---|---|---|---|---|---|---|---|---|---|---
2223137/3/…²| CUDDLE II LED REG 96| 96 W| 105 W| 500 mA| 3500 K| 15500 lm|
13200 lm| 126 lm/W| 0.033 m³| 9.1 kg
- tolerance +/- 5% due to LEDs accuracy
- symbol of chosen optical system eg. 2223133/6/T2 is CUDDLE II LED REG 48 5000K with T2 optical system
DIRECTIVES AND STANDARDS
DIRECTIVES: 2014/35/UE (Ocial Journal of the UE L 96/357 29.03.2014),
2014/30/UE (Ocial Journal of the UE L 96/79 29.03.2014), 2011/65/UE,
2009/125/EC
STANDARDS: – CHARGING DISCHARGE FROM THE LED LUMINAIRE HOUSING
In order to ecient discharge the electrostatic charge from the housing of LED
tting installed on the pole from dielectric material (non-conductive) one of
the following solutions is required:
- functional grounding
- LED luminaire with an additional protection device
CUDDLE II LED REG 96
CUDDLE II LED REG 48W, 60W, 72W
TECHNICAL DRAWING PHOTOMETRIC CURVES POWER SYSTEM FUNCTIONS
Luminaire in standard has following functions of intelligent power supply:
- Connection to outside control system by DALI interface (operation of analog signal 1-10V as an option),
- Possibility of programming multistage dimming of luminaire, up to 5 intervals in the range of from 10 to 100% of nominal power,
- Temperature protection of LED module (from overheating) in case of unintentional luminaire operation during the,
- Regulation of power / luminous ux – the option of setting another value than the catalogue in the range of 30-100% of nominal one,
ACCETABLE QUANTITY OF LUMINAIRES ON ONE CIRCUIT
Overcurrent switches MCB type B or C
Luminaire| Typ| 2A| 4A| 6A| 10A| 16A|
20A| 25A
---|---|---|---|---|---|---|---|---
CUDDLE II LED REG 48, 60, 72W| B| 1| 2| 4| 6| 11| 13| 17
C| 1| 4| 6| 11| 18| 22| 28
CUDDLE II LED REG 96, 120, 144W| B| 1| 1| 3| 5| 8| 12| 12
C| 1| 3| 5| 8| 13| 16| 20
CUDDLE II LED REG 192W| B| 0| 1| 2| 4| 8| 10| 12
C| 1| 2| 4| 6| 13| 16| 18
Fuse – type gG and GL
Luminaire| 2A| 4A| 6A| 10A| 16A| 20A|
20A
---|---|---|---|---|---|---|---
CUDDLE II LED REG 48, 60, 72W| 1| 2| 11| 19| 30| 38| 38
CUDDLE II LED REG 96, 120, 144W| 1| 1| 6| 9| 15| 19| 19
CUDDLE II LED REG 192W| 0| 1| 4| 7| 12| 15| 15
Zakład Produkcji Sprzętu Oświetleniowego „ROSA” Sp. z o.o.
43-109 Tychy, ul. Strefowa 1 tel. +48 32 73 88 901
www.rosa.pl
Updated at: 29-06-2023