RAB T8-12-48G-850-DIR Lamp Installation Guide

RAB T8-12-48G-850-DIR Lamp

Product Information

Specifications

• Product Name: T8-12-48G-850-DIR
• Project: [Project Name]
• Type : [Product Type]
• UPC: 019813750736 Prepared By: [Preparer’s Name]
• Date: [Date]

Features and Benefits

The T8-12-48G-850-DIR offers the following features and
benefits:

• Linear Input Wattage : 12W
• Wattage Equivalency: 32W Fluorescent
• Lumens (Nominal): 1,800 Lm
• Efficacy: 150 Lm/W
• L70 Lifespan: 50,000 Hours

Technical Specifications

• Construction Material: Glass
• Bulb Shape: T8
• Nominal Length: 4 FT
• Finish: Frosted
• Base Type: G13
• For Use Outdoors in Open Fixtures: No
• Color Temperature: 5000K Daylight
• Color Accuracy (CRI): 82 CRI
• Electrical THD: [THD Value]

Product Usage Instructions

Installation

Follow the steps below to install the T8-12-48G-850-DIR:

1. Make sure the power is turned off before installation.
2. Remove the existing fluorescent bulb from the fixture.
3. Insert the T8-12-48G-850-DIR into the fixture, aligning the pins with the sockets.
4. Rotate the bulb gently until it locks into place.
5. Turn on the power and test the light.

Maintenance

To ensure optimal performance and longevity of the T8-12-48G-850-DIR, follow these maintenance guidelines:

• Regularly clean the bulb and fixture to remove dust and debris.
• Check for any signs of damage or discoloration. If found, replace the bulb immediately.
• Inspect the connections periodically to ensure they are tight and secure.

Usage Precautions

Take note of the following precautions when using the T8-12-48G-850-DIR:

• Do not use the bulb outdoors in open fixtures, as it is not designed for such conditions.
• Avoid touching the bulb with bare hands. If necessary, use gloves or a clean cloth to handle it.
• Do not exceed the recommended input wattage to prevent overheating and potential damage.

Disposal

When disposing of the T8-12-48G-850-DIR, follow your local regulations and guidelines for proper disposal of electronic waste.

FAQ

Q: Can the T8-12-48G-850-DIR be used outdoors?

A: No, this bulb is not designed for use outdoors in open fixtures.

Q: What is the color temperature of the T8-12-48G-850-DIR?

A: The color temperature is 5000K, providing a daylight-like illumination.

Q: How long is the lifespan of the T8-12-48G-850-DIR?

A: The bulb has a lifespan of 50,000 hours.

Q: Can I use the T8-12-48G-850-DIR as a replacement for a 32W fluorescent bulb?

A: Yes, this LED bulb is equivalent to a 32W fluorescent bulb in terms of wattage.

Features and Benefits

• Direct Replacement for Fluorescent Lamps: F32T8/32W, F32T8/30W, F32T8/28W, F32T8/25W
• Easy to install plug and play that requires no rewiring, no tools, no instructions
• 50,000 hour Lifespan
• Rated for use in enclosed and open fixtures in dry or damp locations Diffused frosted lens will maintain the same light quality over time
• Compatible with most instant start electronic T8 ballasts, see Ballast Compatibility List
• Approximately 40% more efficient than fluorescent T8 lamps
• Instant on full brightness
• Environmentally friendly, no mercury used
• NSF Listed: NSF/ANSI Standard 2 – Food Equipment – Splash Zone (Not for Direct Food Zone without additional fixture considerations) Dimmable, see Dimmer Compatibility List

Technical Specifications

Performance

• Product Type:
  • Linear
• Input Wattage:
  • 12W
• Wattage Equivalency:
  • 32W Fluorescent
• Lumens (Nominal):
  • 1,800 Lm
• Efficacy:
  • 150 Lm/W
• L70 Lifespan:
  • 50,000 Hours

Construction

• Material:
  • Glass
• Bulb Shape:
  • T8
• Nominal Length:
  • 4 FT
• Finish:
  • Frosted
• Base Type:
  • G13
• For Use Outdoors in Open Fixtures:
  • No

LED Characteristics

• Color Temperature:
  • 5000K Daylight
• Color Accuracy (CRI):
  • 82 CRI

Electrical

• THD:
  • <25%
• Power Factor:
  • Ballast Dependent
• Operating Temperature:
  • -20°C – 45°C (-4°F – 113°F)

Electrical

• Dimmable:
• No
• Input Voltage:
  • Ballast Dependent
• Operating Frequency:
  • Ballast Dependent
• Input Current @ 120V:
  • Ballast Dependent
• Input Current @ 277V:
  • Ballast Dependent

Optical

• Beam Angle:
  • 240°

Installation

• Installation Type:
  • Type A, Plug and Play

Compliance

• UL Listed:
  • Yes
• NSF Listed:
  • Meets NSF/ANSI standards for use in Food Zone (non-contact), Splash, and Non-Food Zones. Tube guard required in open fixtures.
• California Energy Commission (CEC) Status:
  • Lawful for Sales in California
• Application:
  • Suitable for damp locations and totally enclosed fixtures.
• Model Number:
  • T8-12-48G-850-DIR
• DLC Listed:
  • This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. Designed to meet DLC 5 requirements.
• DLC Product Code:
  • P7OCSJRB

Ballast Performance

| 0.78BF| 0.88BF| 1.88BF
---|---|---|---
Lumens| 1700| 1860| 2440
System Power (W)| 13.5| 15| 20

Case and Pallet Dimensions

| QTY| LENGTH (in)| WIDTH (in)| HEIGHT (in)
---|---|---|---|---
CASE| 25| 49.2| 7.9| 7.3
PALLET| 30| 49.2| 39.4| 48.8

Wiring Diagram

Dimension

Light Distribution

Need help?

• Tech help line: 888-722-1000
• Email: [email protected]
• Website: www.rablighting.com

Copyright © 2023 RAB Lighting All Rights Reserved

Note: Specifications are subject to change at any time without notice

References

• Welcome to RAB

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>