RovyVon S2i Search Flashlight User Manual
- June 15, 2024
- RovyVon
Table of Contents
Ready to Go with What You Can Rely On
RovyVon S2i Search Flashlight User Manual
Features
- Max 5000 lumens
- Deep smooth reflector, max 500m beam distance
- 10000mAh battery for a long runtime
- Digital display shows dynamic remaining battery
- Quick charge with the built-in USB-C port
- Emergency outlet to charge devices as a powerbank
- Strong magnetic tail for hands-free work
- IPX7 water resistant
Specifications
- Material: aluminum;
- Weight: 675g (battery included)
- Dimensions: 185mm (Length) x 69mm (Head dia.)
- Cutoff voltage: 2.9V,
- Protect voltage: 3.1V, Low battery: 3.2V
- Input/Output: 5V/3A,9V/3A,12V/2.5A, max 30W (Compatible PD charger needed)
- Optic: Deep smooth reflector;
- Button: Dual metal e-switch
Operation
I. LOCK: from off, rapid triple click the button 2, the display will show LOC.
II. UNLOCK: when locked, rapid triple click the button 1, the display will
show ULK.
UI (condition: unlocked)
A. Button 1 (Unlock symbol)
1. Turn on: rapid double click to turn on the memorized mode.
2. Change mode: when it’s turned on, click to cycle through low-medium-high-
turbo
3. Turn off: press for 0.5s
*Turn off will memorize the last-used mode.
** When the battery is lower than 3.8V, the Turbo modes is not able to access.
B. Button 2 (Lock symbol)
1. Momentary on: press and hold, release to turn off.
2. Turn on the emergency mode: rapid double click to turn on Strobe mode,
then click to cycle through Strobe-SOS-Signal
NOTE
Digital Display
- At any status, click any button to check the remaining battery or charging status; the display goes on for 3 seconds then goes off.
- When the battery is lower than 3.8V, the digital will flash 3 times to remind the voltage is not enough to drive Turbo mode.
- When the light is working and battery is lower than 3.2V, the digital will flash constantly to remind low battery.
- When plugged in to charge, the display will be on automatically and turn off after 3 seconds, and the display is constantly on once charged fully.
- While the light is working, if the battery is lower than 3.0V, the light will stop working and can be reactivated by plugged in to charge. The display will flash to remind to charge.
- Once the battery is lower than 2.9V, the flashlight can’t be operated.
Power Input/ Output
- While charging, only low and medium modes are available to use.
- While charge other device as a power bank, the modes could be accessed are – low and medium.
- If the light was lucked, it will be automatically unlocked when plugged in to charge or output to charge another device, and automatically locked once disconnected.
***It will step down to 2000 lumens (medium mode) in 3 minutes while working at Turbo mode.
Warning
- DO NOT look at the emitter when the light is turned on
- DO NOT point the light at eyes.
- Keep children under 12 away from the light
Shenzhen Runfree Equipment Technology Co., Ltd.
Web: www.RovyVon.com Email: info@RovyVon.com
Address: Rm. 702 Zongtai Future City, Bao’An, Shenzhen, China
Postal code: 518102 Tel: 86 755 2760 1970
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>