RovyVon E8 A4 Angel Eyes EDC Torch User Manual
- June 15, 2024
- RovyVon
Table of Contents
Angel Eyes E8
Manual
Runfree Equipment Technology Co., Ltd.
Website: www.RovyVon.com
Email: info@RovyVon.com
Address: 702, Zongtai Future City, BaoYuan
Rd., Xixiang Street, Bao’An
District, Shenzhen, China
Made in China
| Primary light | Sidelight |
|---|---|
| 6500K Cool white, 70 CRI x2 | A. E8U: UV+White+White |
B. E8UW: UV+UV-FWhite
C. E8UR: UV+Red+White
D. E8W: Red+White+Blue
E. E8R: Red+White+Red
4000K white, 95CRI Warm x2| E8U: UV+White+White
*CRI: Color rendering index| UV wavelength: 365nm
Red wavelength: 625nm
White color temperature: 4000K, warm white
Lock/Unlock
- Button 1
Quad click
- The blue light flashes for 3s
- Green light flashes for 2s
A / B
E8U / E8UW
(UV+White+White)/(UV+UV+White)
Button 1
Primary light Operation
*With the light was switched off and unlocked
-
Moon: Click to turn on, click again to turn off.
-
Momentary on: Hold and press for High mode, release to turn off.
-
Constant on: Rapid double click to turn on from memorized mode*
(1)Change modes: Click to cycle through Low-Med-High
(2)Turn off: Press for 0.5s -
Strobe: Rapid triple click, then click to turn off.
*Turn off will memorize the last-used mode.
Button 2
Sidelight Operation
*With the light was switched off and unlocked
E8U
- White: Click to turn on from low mode, then click to cycle through Low-High
- UV: Rapid double click to turn on
- Turn off: Press for 0.5s
E8UW
- White: click to turn on from low mode, then click to cycle through Low-Med-High
- UV: Rapid double click to turn on from low mode, then click to cycle through Low-High
- Turn off: Press for 0.5s.
C
E8UR
(UV+Red+White)
Button 1
Primary light Operation
*With the light was switched off and unlocked
-
Moon: Click to turn on, click again to turn off.
-
Momentary on: Hold and press for High mode, release to turn off.
-
Constant on: Rapid double click to turn on from memorized mode*
(1)Change modes: Click to cycle through Low-Med-High
(2)Turn off: Press for 0.5s -
Strobe: Rapid triple click, then click to turn off.
*Turn off will memorize the last-used mode.
Button 2
Sidelight Operation
*With the light was switched off and unlocked
- White: Click to turn on from low mode, then click to cycle through Low-High;
- Red: Rapid double click to turn on from the memorized mode*, then click to cycle through Red-Flash-Beacon
- UV: Rapid triple click to turn on
- Turn off: Press for 0.5s.
*Turn off will memorize the last-used mode.
D
E8W
(Red+White+Blue)
Button 1
Primary light Operation
*With the light was switched off and unlocked
-
Moon: Click to turn on, click again to turn off.
-
Momentary on: Hold and press for High mode, release to turn off.
-
Constant on: Rapid double click to turn on from memorized mode*
(1)Change modes: Click to cycle through Low-Med-High
(2)Turn off: Press for 0.5s -
Strobe: Rapid triple click, then click to turn off.
*Turn off will memorize the last-used mode.
Button 2
Sidelight Operation
*With the light was switched off and unlocked
- White: Click to turn on from low mode, then click to cycle through Low-High
- Red: Rapid double click to turn on from the memorized mode*, then click to cycle through Red-Flash-Beacon
- Red/Blue Flash: Rapid triple click to turn on
- Turn off: Press for 0.5s
*Turn off will memorize the last-used mode.
E
E8R
(Red+White+Red)
Button 1
Primary light Operation
*With the light was switched off and unlocked
-
Moon: Click to turn on, click again to turn off.
-
Momentary on Hold and press for High mode, release to turn off
-
Constant on: Rapid double click to turn on from memorized mode*
(1)Change modes Click to cycle through Low-Med-High
(2)Turn off: Press for 0.5s -
Strobe: Rapid triple click, then click to turn off.
*Turn off will memorize the last-used mode.
Button 2
Sidelight Operation
*With the light was switched off and unlocked
- White: Click to turn on from low mode, then click to cycle through Low-High;
- Solid Red: Rapid double click to turn on from low mode then click to cycle through Low-High
- Signal Red: Rapid triple click to turn on from the memorized mode*, then click to cycle through Flash-Beacon
- Turn off: Press for 0.5s
*Turn off will memorize the last-used mode
Product Information
- Primary light
- Latch
- Button1
- Button2
- Key ring loop
- Sidelight
- Clip slot
- USB-C charging port
- Charging, Low battery indicator
Material
| Polycarbonate (Body), 7075 aluminum (Head)
---|---
Dimensions
| 66.1mm (L) x 27.5mm (W) x 13.5mm (H)
Weight
| 30g
Indicators
| Lipo: Blue/Red (2-in-1)
AAA: Green/Red (2-in-1)
Power supply
| Built-in internal battery: Lithium polymer, 330mAh
Replaceable external battery: Compatible with AAA batteries (1.2V, 1.5V, or
3.6V)
Charging
| Port: USB-C (Charges the internal battery ONLY)
Spec: 5V-0.35A
Time: 1 hour
Charging indicator
| The Lipo light breathes blue while in charging, and the AAA light comes on Green when it’s fully charged
Low battery voltage
| Internal battery<3.0V, the Lipo light turns on red
AAA battery<0.8V (Li-ion AAA is 3.0V), the AAA light turns red.
Water resistant
| IPX6
Impact resistant
| 1.5m
Accessories
| User manual, Pocket clip, Keyring, Warranty card
External battery installation steps
1.Press firmly on the light head
2.Open latch
3.Anticlockwise rotation
4.Insert external battery
5.Turn clockwise and lock the latch
Dual battery system
Battery indicator light
-
Green light
External battery -
Blue light
Built-in battery
*Every time it is turned on, it will detect the type of battery currently in use
Battery switch
- Click button 1 to enter moonlight mode
- Triple-click button 1 to switch battery
Switch successfully
- The AAA green light is on for 3 seconds
- The Lipo blue light is on for 3 seconds
Switch failed
- AAA battery is not installed
- Low battery
- Abnormal circuit
1. The Lipo blue light flashes for 3 seconds
2. The AAA Green light flashes for 3 seconds
Table 1: 2x 6500K Cool White
Primary light
| Moon| Low| Med| High| Strobe
---|---|---|---|---|---
Output
(Internal battery)| 0.5lms| 10lms| 100lms| 700lms|
/
Output
(AAA battery¹)
| 0.5lms| 5lms| 20lms| 100lms| /
Runtime
(Internal battery)| 62hrs| 14hrs| 2hrs| 3Mins²+1hr|
/
Intensity
(Internal battery)
| /| /| 300cd| 1300cd| /
Beam Distance
(Internal battery)| /| /| 10m| 70m|
/
Table 2: 2x 4000K Warm white, High CRI, 95CRI
Primary light
| Moon| Low| Med| High| Strobe
---|---|---|---|---|---
Output
(Internal battery)| 0.5lms| 10lms| 70lms| 500lms|
/
Output
(AAA battery¹)
| 0.5lms| 5lms| 15lms| 70lms| /
Runtime
(Internal battery)| 62hrs| 14hrs| 2hrs| 3Mins²+1hr|
/
Intensity
(Internal battery)
| /| /| 200cd| 900cd| /
Beam Distance
(Internal battery)| /| /| 5m| 25m|
/
1.The output while using AAA battery was tested with rechargeable Ni-MH
1.2V AAA battery.
2.The high mode (powered by internal battery) will step down to 150 lumens
in 3 minutes.
Table 3: Sidelight Specs
Light source
| White| Red| Red/Blue| UV
---|---|---|---|---
Mode| Low| Med| High| Low| High| Flash| Beacon| Flash| Low|
High
Output
(Internal battery)
| 0.5lms| 20lms| 60lms| 5lms| 50lms| /| /| /| /| /
Runtime
(Internal battery)| 62hrs| 5hrs| 2hrs| 12hrs| 1.5hrs| /| /| /| 6hrs|
4hrs
NOTE|
- The Medium and High modes are disabled while charging.
- Charging will unlock the light automatically and stay unlocked after unplugged in.
- Switching between the batteries is not available if both internal and external are low battery, or external AAA battery is not installed.
- It supports continuous lighting while replacing AAA battery
---|---
Warranty|
- Period: 2 years since the purchasing date
- Any defective or malfunction by factitious and disassembling without manufacturer’s permission are not under the warranty.
- Email address: info@rovyvon.com
Warning!!!|
- DO NOT look directly into the emitter
- DO NOT cover the light head when it’s turned on to prevent melting the lens.
- DO NOT point the light to eyes.
- Children under 12 years old are not permitted to use this light unsupervised.
Ver.02
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>