RovyVon Angel Eyes E1 Hybrid Keychain Flashlight User Manual

Table of Contents

Specifications

Battery Detection
The product will automatically detect the type of battery currently in use every time it is turned on.

Battery Switching
To switch between different batteries, follow these steps

Frequently Asked Questions (FAQ)

Q: How do I know which battery is currently in use?
A: The battery indicator light will show a green light if an external battery (E1 Angel Eyes Lipo AAA) is being used. If a built-in battery is being used, the blue light will be displayed.
Q: Can I switch batteries while the product is turned on?
A: Yes, you can switch batteries by triple-clicking button 1. However, it is recommended to switch batteries when the product is turned off to ensure proper detection and functionality.

Angel Eyes E1 & E4
Manual

Runfree Equipment Technology Co., Ltd.
Website: www.RovyVon.com
Email : [email protected]
Address : 702, Zongtai Future City, BaoYuan Rd., Xixiang Street, Bao’An District, Shenzhen, China

Made in China

Lock/Unlock
The diagrams in this manual are only for function display, the actual product may vary.

Operate with the light off and unlocked.

Button 1

Moonlight mode : Click to turn on, click again to turn off.
Memory mode (Low or Med or High): Quick double-click to turn on from saved mode*
To change the modes : Click to cycle through low – medium – high modes
Power off: press and hold for 0.5 seconds.

To save the lighting mode you’d like to use the next time the lights come on, simply switch to that mode and then switch off.

Button 2

Momentary on mode : press and hold for the momentary High mode, then release the button to turn it off.
Emergency mode (strobe) : Quick double- click to turn on. Click to turn off.

Tips : Double-click to quickly switch between Memory (Button 1) and Strobe (Button 2) modes

Battery indicator light
Every time it is turned on, it will detect the tune of battery currently in use

Battery switch

Switch successfully

The AAA green light is on for 3 seconds
The Lipo blue light is on for 3 seconds

Switch failed

The Lipo blue light flashes for 3 seconds
The AAA Green light flashes for 3 seconds

Table 1: 2x 6500K Cool White

Table 2: 2x 4000K Warm white. Hiah CRI. 95CRI

The output while using AAA battery was tested with rechargeable Ni-MH 1.2V AAA battery.
The high mode (powered by internal battery) will step down to 150 lumens in 3 minutes.

NOTE

The Medium and High modes are disabled while charging.
Charging will unlock the light automatically and stay unlocked after unplugged in.
Switching between the batteries is not available if both internal and external are low battery, or external AAA battery is not
It supports continuous lighting while replacing AAA battery.

Period : 2 years since the purchasing date
Any defective or malfunction by factitious Warranty and disassembling without manufacturer’s permission are not under the warranty.
Email address : [email protected]

Warning

DO NOT look directly into the emitter
DO NOT cover the light head when it’s Warning turned on to prevent melting the lens.
DO NOT point the light to eyes.
Children under 12 years old are not permitted to use this light unsupervised.