RovyVon S21 Rechargeable EDC Flashlight User Manual
- June 15, 2024
- RovyVon
Table of Contents
RovyVon S21 Rechargeable EDC Flashlight
Product Overview
Before the first use, please unscrew the tailcap and remove the insulation sheet.
Product Information
| Material | Aluminium alloy |
|---|---|
| Size | 143.5 x 29.7 x 25.4 (mm) |
Length x Head Diameter x Body Diameter
Weight| 116g (net), 185g (battery included)
Light source Output| SFT-70 6500K Cool White/ Max 3000Im
Optic & Beam distance| Smooth reflector, max 400m
Dual Switch| 1. Mechanical switch: turn on the light
2. Clicky-switch: change modes and activate turbo mode
Battery| 5000mAh Li-ion battery (included)
Charging| Port: USB-C
Spec: 5V 3A
Time: 2.5 hours
Charging indicator| Charging: Breathing blue Complete: Solid green
Remaining battery indicator| From left to right;
Single LED: Red< 5%; Blue: 5%-19% Two Blue LEDs: 20%-39%
Three Blue LEDs: 40%-59%
Four Blue LEDs: 60%-100%
Protect Voltage| Low battery: 3.1V; Cutoff: 3.0V
Magnetic| Tail cap
Water-resistant| IPX8
Impact resistant| 1.5m
Accessories| User manual x1, Warranty card x1, Pocket clip x1, USB-A to
USB-C cable x1, Port cover x1, Lanyard x1, O-ring x1
Operation
- Rotate the Mechanical switch counterclockwise to turn on the lighting mode from the memory mode*, then click the Clicky-switch to cycle through Eco-Low-MedHigh modes.
- Turn-off memorizes the last-used mode.
- Rotate the Mechanical switch clockwise to turn on the Emergency mode from the Strobe mode, then click the Clicky switch to cycle through Strobe-SOS modes.
Turbo mode
- With the light on (rotating the Mechanical-switch clockwise or counterclockwise), press and hold the Clicky-swtich to momentarily activate the Turbo mode, then release the switch to return to the previous mode.
Battery Indicators And Charging
Remaining battery indicator
- Check the remaining battery by S21 clicking the Clicky-switch with the light off or rotating the Mechanical-switch
- Check how much the battery is charged by clicking the Clicky switch while it’s charging.
USB-C Charging
Charging indicator
- Charging: Breathing blue
- Complete: Solid green
Magnetic tail cap
Note: The thicker the surface of the steel, the better performance the magnetic force.
Specifications
| Specs\Modes | Eco | Low | Medium | High | Turbo |
|---|---|---|---|---|---|
| Output (Lumens) | 30 | 200 | 800 | 1600 | 3000 1 |
| Runtime (hours) | 65 | 13.5 | 2.5 | 4Mins2+ |
2hrs
| /
Intensity (Candela)| /| 3000| 12000| 25000| 40000
Beam Distance (meters)| /| 100| 200| 300| 400
***** Parameters may vary from environment, battery, using method, and flashlight.
- The turbo mode can only be activated when the light is turned on and will stepdown to Medium in 10 seconds.
- The High mode will stepdown to the Medium mode in 4 minutes.
Terms & Service
Warranty
| 1. Period: 2 years since the purchasing date
2. Any defective or malfunction by factitious and disassembling without manufacturer’s permission are not under the warranty.
3. Email address: [email protected]
---|---
Note
| 1. While charging, only Eco and Low modes are available (The mechanical switch locates in Strobe will go to Low mode instead).
2. When the battery is low, only Eco mode is available (The brightness is lower than Eco while rotating the mechanical switch to Strobe position to remind the battery is low).
3. When the temperature is high, the Turbo mode is only available for 3 seconds to prevent overheat.
4. When the temperature is higher than the valve value, Turbo mode is disabled.
Warning
| 1. DO NOT look directly into the emitter
2. DO NOT cover the light head when it’s turned on.
3. DO NOT point the light to eyes.
4. Children under 12 years old are not permitted to use this light unsupervised.
Contact
Runfree Equipment Technology Co., Ltd.
- Website: www.RovyVon.com
- Email: [email protected]
- Address: 702, Zongtai Future City, BaoYuan Rd., Xixiang Street, Bao’An District, Shenzhen, China
Scan
Made in China