RovyVon A1 Generation Bright Mini Torch User Manual
- June 14, 2024
- RovyVon
Table of Contents
Aurora A1
Manual
A1 Generation Bright Mini Torch
Runfree Equipment Technology Co., Ltd.
Website: www.RovyVon.com
Email: [email protected]
Address: 702, Zongtai Future City, BaoYuan
Rd., Xixiang Street, Bao’An
District, Shenzhen, China
Made in China
Warranty
- Period: 2 years since the purchasing date
- Any defective or malfunction by factitious and disassembling without manufacturer’s permission are not under the warranty.
- Email address: [email protected]
Note
- While charging, ONLY moon and low modes are available.
- Plugging in to charge will automatically unlock the light and stay unlocked after unplugged.
- When the battery is lower than Note 2.8V, it’s not able to turn on until it’s plugged in to charge.
- When the battery is low: a) The red indicator will come on constantly when the light is working; b) When the light is switched off, clicking the button will get the indicator on for 5s to remind to charge.
Warning
- D0 NOT look directly into the emitter
- D0 NOT cover the light head when it’s turned on to prevent Warning melting the lens.
- D0 NOT point the light to eyes.
- Children under 12 years old are not permitted to use this light unsupervised.
Product Information
| Material | Polyamide (Body), Stainless steel (Bezel) |
|---|---|
| Size | 60.5mm (Length) x 15.6mm (Diameter) |
| Weight | 16.8g |
| Light source | High Output: 6500K Cool white, 70CRI |
High CRI: 5000K Neutral white, 90CRI
Battery| Built-in, Lithium Polymer, 300mAh
Charging| Port: USB-C
Spec: 5V ****0.35A
Fully charged time: 1 hour
Indicator| Low battery: Red
Charging: Breathing blue
Fully charged: Solid blue
Protect Voltage| Low battery: 3.0V; Cutoff: 2.8V
Water resistant| IPX6
Impact resistant| 1.5m
Accessodes| Pocket clip, Keyring, User manual, Warranty card
Lock / Unlock
*Please unlock before first use (Rapid 5-clicks to unlock or plug in to charge)
Lock
-
Rapid 5-clicks to lock the light with the light switched off, the LED will blink twice.
Unlock -
Rapid 5-clicks to unlock with the light locked, the LED will blink 3 times.
Operation
-
The operation below is under the Unlock status.
-
Momentary on: With the light switched off, press and hold the button for High mode, release to turn off.
-
Constant-on: Rapid double-click to turn on from the memorized mode
a) Change modes: Click to cycle through Moon-Low-Med-High
b) Turn off: Press for 0.5s or Click (A mode works over 3minutes)
Mode memory: Working over 3 minutes then turn off. -
Strobe: Rapid triple-click, then click to turn off.
-
Brightnesses Graphic
Cool White, High output Primary Light
| Mode | Moon | low | Med | High | Strobe |
|---|---|---|---|---|---|
| Output | 0.5Ims | 25Ims | 200Ims | 650Ims | / |
| Runtime | 56hrs | 6hrs | 1 Min¹+1.5hrs | 1Min¹+1.25hrs | / |
| Intensity | / | 160cd | 700cd | 2500cd | / |
| Beam Distance | / | 22m | 63m | 110m | / |
Neutral White, High CRI Primary Light
| Mode | Moon | low | Med | High | Strobe |
|---|---|---|---|---|---|
| Output | 0. 5Ims | 20Ims | 150Ims | 420Ims | / |
| Runtime | 56hrs | 6hrs | 1Min¹+1.5hrs | 1Min¹+1.25hrs | / |
| Intensity | / | 80cd | 300cd | 1200cd | / |
| Beam Distance | / | 10m | 18m | 70m | / |
- It will step down to 80 lumens in 1 minute when the light is working at Medium and High modes.