KOLINK 230829 Unity Arena ARGB Midi Tower Showcase User Manual

UNITY ARENA
ARGB MIDI TOWER SHOWCASE
USER MANUAL

ACCESSORY PACK CONTENTS

PANEL REMOVAL

• Left Panel – Pull the metal ab at the upper rear of the panel to dsengage from the chassis then ft away.
• Right Panel – Pull the meal taat the pper rar ofthe panel to isengage rom the chassis then It away.

MOTHERBOARD INSTALLATION

• Align your motherboard with the chassis to locate where the stand-offs should be installed. Once done, remove the motherboard and fasten stand-offs accordingly.
• Insert your motherboard I/O plate into the cutout at the rear of the case.
• Place your motherboard into the chassis, making sure the rear ports fit into the I/O plate.
• Use the provided motherboard screws to attach your motherboard to the chassis.

POWER SUPPLY INSTALLATION

• Place PSU in the bottom rear of the case, within the PSU shroud.
• Align the holes and secure with screws.

VIDEO CARD/PCI-E CARD INSTALLATION

• Remove the rear PCI-E slot covers as necessary (depending on the slot size of your card)
• Carefully position and slide your PCI-E card into place, then secure with the add-on card screws supplied.
• If mounting vertically, attach the provided vertical GPU bracket to the rear PCI-E panel, secure your Kolink PCI-E riser cable to the PSU shroud (sold separately) and attach the cable to the motherboard. Remove the rear PCI-E slot covers as necessary, then carefully position your PCI-E card, slot into the PCI-E riser mount and secure with the add-on screws supplied.

3.5″ HDD INSTALLATION

• Place the 3.5″ HDD into/on top of the HDD bracket and screw in if required.

2.5″ SSD INSTALLATION (REAR)

2.5″ SSD INSTALLATION

• Remove the bracket from the rear of the motherboard plate, attach your 2.5″ drive and then drop & lock into place.
• Place the 2.5″ HDD/SSD into/on top of the HDD bracket and screw in if required.

TOP FAN INSTALLATION

• Remove the dust filter from the top of the case.
• Align your fan(s) to the screw holes on the top of the chassis and secure with screws.
• Replace your dust filter once secured.

SIDE/REAR FAN INSTALLATION

• Align your fan to the screw holes on the chassis and secure with screws.

WATERCOOLING RADIATOR INSTALLATION

• Secure the fans to the radiator, then fasten the radiator inside the chassis by securing with screws from the outside.

I/O PANEL INSTALLATION

• Carefully check the labelling of each connector from the I/O panel to identify their function.
• Cross reference with the motherboard manual to locate where each wire should be installed, then secure one at a time. Please ensure they are installed in the correct polarity to avoid non-function or damage.

The WEEE symbol indicates that this product must not be disposed of with normal household waste. Through the correct disposal of this product, you will help protect the environment. For more information on the disposal of this product, please contact your local municipality, your waste disposal service or the shop where you purchased the product.

Pro Gamersware GmbH
GaufstraBe 1, 10589 Berlin, Deutschland
[email protected]
+49(0)30 83797272
www.kolink.eu
[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>