allen roth LFM8203AX-02 AVA 3 Light 16 In Matte Back Semi Flush Mount Light Instruction Manual
- June 15, 2024
- Allen+Roth
Table of Contents
**allen roth LFM8203AX-02 AVA 3 Light 16 In Matte Back Semi Flush Mount Light Instruction Manual
**
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page
If you have any questions or problems, please call our customer service
department at 866-439-9800, 8 a.m. – 8
p.m., EST, Monday – Sunday. You could also contact us at [email protected]
PROBLEM PROBLEMA| POSSIBLE CAUSE CAUSA POSIBLE| CORRECTIVE ACTION ACCIÓN
CORRECTIVA
---|---|---
Bulb will not light. La bombils no enceinte.|
- Bulb is burned out./La bombils seta quemados
- Faulty wire connection./La conation de loss cables es incorrect
|
- Replace light bulb./Replaced la bombils.
- Check wiring./Revise el cable ado
CARE AND MAINTENANCE
- Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes
TOOLS REQUIRED (NOT INCLUDED)/ HERRAMIENTAS NECESARIAS (no se included):
FEELING CONFIDENT? START YOUR NEXT PROJECT/¿SE SIENTE CONFIADO? INICIE SU PRÓXIMO PROYECTO
- Visit lowes.com for more information.
SAFETY INFORMATION/INFORMACIÓN DE SEGURIDAD
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- • Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
PACKAGE CONTENTS
HARDWARE CONTENTS
Note : Hardware shown actual size.
INSTALLATION OVERVIEW/DESCRIPCIÓN GENERAL DE LA INSTALACIÓN
Turn off the power and remove existing fixture.
Unscrew the cap nuts C from mounting screws B. Attach A to outlet box
using AA.
**** Temporarily place D through B to determine amount of adjustment
necessary for B
**** Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare
**** Attach BB to connections with electrical tape (not included)
**** Lift D up over B, securing in place with previously removed C.
Install light bulbs (not included). Use 60-watt max. candelabra-base
incandescent bulbs or CFL/LED equivalents
**** Assembly is complete.
